Mock sample for your project: Request Baskets API
Integrate with "Request Baskets API" from rbaskets.in in no time with Mockoon's ready to use mock sample
Request Baskets API
Version: 1.0.0
Speed up your application development by using "Request Baskets API" ready-to-use mock sample. Mocking this API will allow you to start working in no time. No more accounts to create, API keys to provision, accesses to configure, unplanned downtime, just work.
It also improves your integration tests' quality and reliability by accounting for random failures, slow response time, etc.
Description
RESTful API of Request Baskets service.
Request Baskets is an open source project of a service to collect HTTP requests and inspect them via RESTful
API or web UI.
Check out the project page for more detailed description.
Other APIs in the same category
Rudder API
Download OpenAPI specification: openapi.yml
Introduction
Rudder exposes a REST API, enabling the user to interact with Rudder without using the webapp, for example in scripts or cronjobs.
Versioning
Each time the API is extended with new features (new functions, new parameters, new responses, ...), it will be assigned a new version number. This will allow you
to keep your existing scripts (based on previous behavior). Versions will always be integers (no 2.1 or 3.3, just 2, 3, 4, ...) or latest.
You can change the version of the API used by setting it either within the url or in a header:
the URL: each URL is prefixed by its version id, like /api/version/function.
Version 10
curl -X GET -H "X-API-Token: yourToken" https://rudder.example.com/rudder/api/10/rules
Latest
curl -X GET -H "X-API-Token: yourToken" https://rudder.example.com/rudder/api/latest/rules
Wrong (not an integer) => 404 not found
curl -X GET -H "X-API-Token: yourToken" https://rudder.example.com/rudder/api/3.14/rules
the HTTP headers. You can add the X-API-Version header to your request. The value needs to be an integer or latest.
Version 10
curl -X GET -H "X-API-Token: yourToken" -H "X-API-Version: 10" https://rudder.example.com/rudder/api/rules
Wrong => Error response indicating which versions are available
curl -X GET -H "X-API-Token: yourToken" -H "X-API-Version: 3.14" https://rudder.example.com/rudder/api/rules
In the future, we may declare some versions as deprecated, in order to remove them in a later version of Rudder, but we will never remove any versions without warning, or without a safe
period of time to allow migration from previous versions.
Existing versions
Version
Rudder versions it appeared in
Description
1
Never released (for internal use only)
Experimental version
2 to 10 (deprecated)
4.3 and before
These versions provided the core set of API features for rules, directives, nodes global parameters, change requests and compliance, rudder settings and system API
11
5.0
New system API (replacing old localhost v1 api): status, maintenance operations and server behavior
12
6.0 and 6.1
Node key management
13
6.2
Node status endpoint
System health check
System maintenance job to purge software [that endpoint was back-ported in 6.1]
Response format
All responses from the API are in the JSON format.
{
"action": The name of the called function,
"id": The ID of the element you want, if relevant,
"result": The result of your action: success or error,
"data": Only present if this is a success and depends on the function, it's usually a JSON object,
"errorDetails": Only present if this is an error, it contains the error message
}
Success responses are sent with the 200 HTTP (Success) code
Error responses are sent with a HTTP error code (mostly 5xx...)
HTTP method
Rudder's REST API is based on the usage of HTTP methods. We use them to indicate what action will be done by the request. Currently, we use four of them:
GET: search or retrieve information (get rule details, get a group, ...)
PUT: add new objects (create a directive, clone a Rule, ...)
DELETE: remove objects (delete a node, delete a parameter, ...)
POST: update existing objects (update a directive, reload a group, ...)
Parameters
General parameters
Some parameters are available for almost all API functions. They will be described in this section.
They must be part of the query and can't be submitted in a JSON form.
Available for all requests
Field
Type
Description
prettify
boolean optional
Determine if the answer should be prettified (human friendly) or not. We recommend using this for debugging purposes, but not for general script usage as this does add some unnecessary load on the server side.
Default value: false
Available for modification requests (PUT/POST/DELETE)
Field
Type
Description
reason
string optional or required
Set a message to explain the change. If you set the reason messages to be mandatory in the web interface, failing to supply this value will lead to an error.
Default value:""
changeRequestName
string optional
Set the change request name, is used only if workflows are enabled. The default value depends on the function called
Default value: A default string for each function
changeRequestDescription
string optional
Set the change request description, is used only if workflows are enabled.
Default value:""
Passing parameters
Parameters to the API can be sent:
As part of the URL for resource identification
As data for POST/PUT requests
Directly in JSON format
As request arguments
As part of the URL for resource identification
Parameters in URLs are used to indicate which resource you want to interact with. The function will not work if this resource is missing.
Get the Rule of ID "id"
curl -H "X-API-Token: yourToken" https://rudder.example.com/rudder/api/latest/rules/id
Sending data for POST/PUT requests
Directly in JSON format
JSON format is the preferred way to interact with Rudder API for creating or updating resources.
You'll also have to set the Content-Type header to application/json (without it the JSON content would be ignored).
In a curl POST request, that header can be provided with the -H parameter:
curl -X POST -H "Content-Type: application/json" ...
The supplied file must contain a valid JSON: strings need quotes, booleans and integers don't, etc.
The (human readable) format is:
Here is an example with inlined data:
Update the Rule 'id' with a new name, disabled, and setting it one directive
curl -X POST -H "X-API-Token: yourToken" -H "Content-Type: application/json"
https://rudder.example.com/rudder/api/rules/latest/{id}
-d '{ "displayName": "new name", "enabled": false, "directives": "directiveId"}'
You can also pass a supply the JSON in a file:
Update the Rule 'id' with a new name, disabled, and setting it one directive
curl -X POST -H "X-API-Token: yourToken" -H "Content-Type: application/json" https://rudder.example.com/rudder/api/rules/latest/{id} -d @jsonParam
Note that the general parameters view in the previous chapter cannot be passed in a JSON, and you will need to pass them a URL parameters if you want them to be taken into account (you can't mix JSON and request parameters):
Update the Rule 'id' with a new name, disabled, and setting it one directive with reason message "Reason used"
curl -X POST -H "X-API-Token: yourToken" -H "Content-Type: application/json" "https://rudder.example.com/rudder/api/rules/latest/{id}?reason=Reason used" -d @jsonParam -d "reason=Reason ignored"
Request parameters
In some cases, when you have little, simple data to update, JSON can feel bloated. In such cases, you can use
request parameters. You will need to pass one parameter for each data you want to change.
Parameters follow the following schema:
key=value
You can pass parameters by two means:
As query parameters: At the end of your url, put a ? then your first parameter and then a & before next parameters
Update the Rule 'id' with a new name, disabled, and setting it one directive
curl -X POST -H "X-API-Token: yourToken" https://rudder.example.com/rudder/api/rules/latest/{id}?"displayName=my new name"&"enabled=false"&"directives=aDirectiveId"
As request data: You can pass those parameters in the request data, they won't figure in the URL, making it lighter to read, You can pass a file that contains data.
Update the Rule 'id' with a new name, disabled, and setting it one directive (in file directive-info.json)
curl -X POST -H "X-API-Token: yourToken"
https://rudder.example.com/rudder/api/rules/latest/{id} -d "displayName=my new name" -d "enabled=false" -d @directive-info.json
Introduction
Rudder exposes a REST API, enabling the user to interact with Rudder without using the webapp, for example in scripts or cronjobs.
Versioning
Each time the API is extended with new features (new functions, new parameters, new responses, ...), it will be assigned a new version number. This will allow you
to keep your existing scripts (based on previous behavior). Versions will always be integers (no 2.1 or 3.3, just 2, 3, 4, ...) or latest.
You can change the version of the API used by setting it either within the url or in a header:
the URL: each URL is prefixed by its version id, like /api/version/function.
Version 10
curl -X GET -H "X-API-Token: yourToken" https://rudder.example.com/rudder/api/10/rules
Latest
curl -X GET -H "X-API-Token: yourToken" https://rudder.example.com/rudder/api/latest/rules
Wrong (not an integer) => 404 not found
curl -X GET -H "X-API-Token: yourToken" https://rudder.example.com/rudder/api/3.14/rules
the HTTP headers. You can add the X-API-Version header to your request. The value needs to be an integer or latest.
Version 10
curl -X GET -H "X-API-Token: yourToken" -H "X-API-Version: 10" https://rudder.example.com/rudder/api/rules
Wrong => Error response indicating which versions are available
curl -X GET -H "X-API-Token: yourToken" -H "X-API-Version: 3.14" https://rudder.example.com/rudder/api/rules
In the future, we may declare some versions as deprecated, in order to remove them in a later version of Rudder, but we will never remove any versions without warning, or without a safe
period of time to allow migration from previous versions.
Existing versions
Version
Rudder versions it appeared in
Description
1
Never released (for internal use only)
Experimental version
2 to 10 (deprecated)
4.3 and before
These versions provided the core set of API features for rules, directives, nodes global parameters, change requests and compliance, rudder settings and system API
11
5.0
New system API (replacing old localhost v1 api): status, maintenance operations and server behavior
12
6.0 and 6.1
Node key management
13
6.2
Node status endpoint
System health check
System maintenance job to purge software [that endpoint was back-ported in 6.1]
Response format
All responses from the API are in the JSON format.
{
"action": The name of the called function,
"id": The ID of the element you want, if relevant,
"result": The result of your action: success or error,
"data": Only present if this is a success and depends on the function, it's usually a JSON object,
"errorDetails": Only present if this is an error, it contains the error message
}
Success responses are sent with the 200 HTTP (Success) code
Error responses are sent with a HTTP error code (mostly 5xx...)
HTTP method
Rudder's REST API is based on the usage of HTTP methods. We use them to indicate what action will be done by the request. Currently, we use four of them:
GET: search or retrieve information (get rule details, get a group, ...)
PUT: add new objects (create a directive, clone a Rule, ...)
DELETE: remove objects (delete a node, delete a parameter, ...)
POST: update existing objects (update a directive, reload a group, ...)
Parameters
General parameters
Some parameters are available for almost all API functions. They will be described in this section.
They must be part of the query and can't be submitted in a JSON form.
Available for all requests
Field
Type
Description
prettify
boolean optional
Determine if the answer should be prettified (human friendly) or not. We recommend using this for debugging purposes, but not for general script usage as this does add some unnecessary load on the server side.
Default value: false
Available for modification requests (PUT/POST/DELETE)
Field
Type
Description
reason
string optional or required
Set a message to explain the change. If you set the reason messages to be mandatory in the web interface, failing to supply this value will lead to an error.
Default value:""
changeRequestName
string optional
Set the change request name, is used only if workflows are enabled. The default value depends on the function called
Default value: A default string for each function
changeRequestDescription
string optional
Set the change request description, is used only if workflows are enabled.
Default value:""
Passing parameters
Parameters to the API can be sent:
As part of the URL for resource identification
As data for POST/PUT requests
Directly in JSON format
As request arguments
As part of the URL for resource identification
Parameters in URLs are used to indicate which resource you want to interact with. The function will not work if this resource is missing.
Get the Rule of ID "id"
curl -H "X-API-Token: yourToken" https://rudder.example.com/rudder/api/latest/rules/id
Sending data for POST/PUT requests
Directly in JSON format
JSON format is the preferred way to interact with Rudder API for creating or updating resources.
You'll also have to set the Content-Type header to application/json (without it the JSON content would be ignored).
In a curl POST request, that header can be provided with the -H parameter:
curl -X POST -H "Content-Type: application/json" ...
The supplied file must contain a valid JSON: strings need quotes, booleans and integers don't, etc.
The (human readable) format is:
Here is an example with inlined data:
Update the Rule 'id' with a new name, disabled, and setting it one directive
curl -X POST -H "X-API-Token: yourToken" -H "Content-Type: application/json"
https://rudder.example.com/rudder/api/rules/latest/{id}
-d '{ "displayName": "new name", "enabled": false, "directives": "directiveId"}'
You can also pass a supply the JSON in a file:
Update the Rule 'id' with a new name, disabled, and setting it one directive
curl -X POST -H "X-API-Token: yourToken" -H "Content-Type: application/json" https://rudder.example.com/rudder/api/rules/latest/{id} -d @jsonParam
Note that the general parameters view in the previous chapter cannot be passed in a JSON, and you will need to pass them a URL parameters if you want them to be taken into account (you can't mix JSON and request parameters):
Update the Rule 'id' with a new name, disabled, and setting it one directive with reason message "Reason used"
curl -X POST -H "X-API-Token: yourToken" -H "Content-Type: application/json" "https://rudder.example.com/rudder/api/rules/latest/{id}?reason=Reason used" -d @jsonParam -d "reason=Reason ignored"
Request parameters
In some cases, when you have little, simple data to update, JSON can feel bloated. In such cases, you can use
request parameters. You will need to pass one parameter for each data you want to change.
Parameters follow the following schema:
key=value
You can pass parameters by two means:
As query parameters: At the end of your url, put a ? then your first parameter and then a & before next parameters
Update the Rule 'id' with a new name, disabled, and setting it one directive
curl -X POST -H "X-API-Token: yourToken" https://rudder.example.com/rudder/api/rules/latest/{id}?"displayName=my new name"&"enabled=false"&"directives=aDirectiveId"
As request data: You can pass those parameters in the request data, they won't figure in the URL, making it lighter to read, You can pass a file that contains data.
Update the Rule 'id' with a new name, disabled, and setting it one directive (in file directive-info.json)
curl -X POST -H "X-API-Token: yourToken"
https://rudder.example.com/rudder/api/rules/latest/{id} -d "displayName=my new name" -d "enabled=false" -d @directive-info.json
Custom Vision Prediction Client
microsoft.com
Request Baskets API
RESTful API of Request Baskets service.
Request Baskets is an open source project of a service to collect HTTP requests and inspect them via RESTful
API or web UI.
Check out the project page for more detailed description.
Request Baskets is an open source project of a service to collect HTTP requests and inspect them via RESTful
API or web UI.
Check out the project page for more detailed description.
IP2WHOIS Domain Lookup
ip2whois.com
IP2WHOIS is a free tool to allow you to check WHOIS information for a particular domain, such as domain assigned owner contact information, registrar information, registrant information, location and much more.
Spell Check Client
microsoft.com
The Spell Check API - V7 lets you check a text string for spelling and grammar errors.
AutoSuggest Client
microsoft.com
Autosuggest supplies search terms derived from a root text sent to the service. The terms Autosuggest supplies are related to the root text based on similarity and their frequency or ratings of usefulness in other searches. For examples that show how to use Autosuggest, see Search using AutoSuggest.
Swagger Generator
swagger.io
This is an online swagger codegen server. You can find out more at https://github.com/swagger-api/swagger-codegen or on irc.freenode.net, #swagger.
Video Search Client
microsoft.com
The Video Search API lets you search on Bing for video that are relevant to the user's search query, for insights about a video or for videos that are trending based on search requests made by others. This section provides technical details about the query parameters and headers that you use to request videos and the JSON response objects that contain them. For examples that show how to make requests, see Searching the Web for Videos.
Appwrite
Appwrite backend as a service cuts up to 70% of the time and costs required for building a modern application. We abstract and simplify common development tasks behind a REST APIs, to help you develop your app in a fast and secure way. For full API documentation and tutorials go to https://appwrite.io/docs
Local Search Client
microsoft.com
The Local Search client lets you send a search query to Bing and get back search results that include local businesses such as restaurants, hotels, retail stores, or other local businesses. The query can specify the name of the local business or it can ask for a list (for example, restaurants near me).