Mock sample for your project: Jawaharlal Nehru Rajkeeya Mahavidyalaya API

The following issued documents can be integrated with DigiLocker and get used by candidates for service delivery - 1.One Time Verification -OTV certificate � issued to candidates qualified for appointment for posts in Govt. Sector to produce to the concerned dept. after scrutinizing their the relevant documents to prove their qualifications, age, etc.2. Admission Tickets for appearing Online, OMR Exams, Physical Test, Interview etc. 3.Departmental Test Certificates- is issued to employees in Govt. sector

Goa WRD (https://goawrd.gov.in/) is the official departmental portal of the Water Resources Department, Govt. of Goa, through which citizens can avail time bound service being offered by the department. Certificates issued by it (e.g. Contractor Enlistment, Well Registration etc) are made available in citizens' DigiLocker accounts.

Pension Payment Order and UAN, as provided by EPFO (https://www.epfindia.gov.in), can be downloaded in citizen's DigiLocker account.

Parivar Patra (http://aadhaar.hp.gov.in/epanchayat/) is the online service portal by Govt. of Himachal Pradesh. Parivar Register issued online certificate can be pulled into citizens' DigiLocker accounts.

Lok Praman Patra (http://admis.hp.nic.in/epraman/) is the online service delivery portal by Himachal Pradesh Govt. Certain documents issued by it (e.g. Bonafide, Dogra Class, Income, Character Certificates etc.) can be pulled into citizens' DigiLocker accounts.

All India Institute of Medical Sciences Patna, previously Jaya Prakash Narayan All India Institute of Medical Sciences, is a medical college and medical research public institute located in Phulwari Sharif, Patna, Bihar,

Geetanjali University, Udaipur (http://www.geetanjaliuniversity.com/) is issuing Degree certificates through DigiLocker. These can be pulled by students into their DigiLocker accounts. Currently, data for the year 2016 is made available by Geetanjali University.

APIs provided by Antyodaya Saral Haryana, Haryana.

General Administration Department, Bihar (http://gad.bih.nic.in/) is LIVE with DigiLocker. You can fetch your EWS certificate into your DigiLocker user account.

Class X and XII marksheets and passing certificates of Maharashtra State Board of Secondary and Higher Secondary Education (https://mahahsscboard.maharashtra.gov.in/) are available in DigiLocker for years 1990 to 2017.

APIs provided by Accountants General, Tripura.

Certificates issued under Pradhan Mantri Gramin Digital Saksharta Abhiyaan (PMGDISHA) (https://www.pmgdisha.in) scheme enrolled at authorised Training Centres/ CSCs are made available to citizens in their DigiLocker accounts.

Veer Surendra Sai University Of Technology, Odisha (http://vssut.ac.in) is issuing Degree certificates through DigiLocker. These can be pulled by students into their DigiLocker accounts. Currently, data for the year's 2014-2019 is made available by Veer Surendra Sai University Of Technology.

An API which retrieves Members data.

Get lists of NYT Articles based on shares, emails, and views.

Finds shortest/fastest route between a start point and one or more stop points on British Columbia's public road network. The BC Route planner webpage provides additional information. Here are some geocoded addresses to play with: 18 Douglas St,Victoria -123.36962,48.40892 1002 Johnson St, Victoria -123.355745,48.426206 543 Johnson St, Victoria, BC -123.36907,48.42770 14 Centennial Sq, Victoria, BC -123.36564,48.42863 1105 Royal Ave,New Westminster -122.92009,49.20063 808 Jackson Cres, New Westminster -122.90762,49.22558 10810 McDonald Rd, Chilliwack -121.93808,49.19859 3950 June Springs Rd, Kelowna -119.40751,49.83960 1201 Riondel Rd, Kootenay Bay -116.85402,49.74448 1201 Riondel Rd, Kootenay Bay -116.832759,49.730500 (parcelPoint) 2499 Walbran Pl, Courtenay -124.97295,49.71518 2013 Smoke Bluff Rd, Squamish -123.13946,49.70401 235 Kelvin Grove Way, Lions Bay -123.23524,49.45035 Please see our data collection notice.
Please note that you may experience issues when submitting requests to the delivery or test environment if using this OpenAPI specification in other API console viewers.
Developer API keys are unique and can be acquired with a GitHub account. Production government applications may use organization API keys acquired by contacting DataBC.

Entity which provides health information aggregation services to customers of health care services.
It enables customers to fetch their health information from one or more Health Information Providers
(e.g., Hospitals, Diagnostic Labs, Medical Device Companies), based on their explicit Consent and to share such
aggregated information with Health Information Users i.e. entities in need of such data (e.g., Insurers,
Doctors, Medical Researchers).
Specifications
This document maintains only the Health Information Gateway relevant APIs.

AMBIT REST web services [eNanoMapper profile] with free text & faceted search

Enforcement and Compliance History Online (ECHO) is a tool developed and maintained by EPA's Office of Enforcement and Compliance Assurance for public use.
ECHO provides integrated compliance and enforcement information for over 1 million regulated facilities nationwide.
EFF Rest Services provides the data for ECHO's Effluent Charts, a set of dynamic charts and tables of permitted effluent limits, releases, and violations over time for Clean Water Act (CWA) wastewater discharge permits issued under the National Pollutant Discharge Elimination System (NPDES).
See Effluent Charts Help (https://echo.epa.gov/help/reports/effluent-charts-help) for additional information.
\
The are 3 service end points for Effluent Charts: getsummarychart, geteffluentchart, and downloadeffluentchart.
\
1) Use getsummarychart to retrieve a summary matrix of effluent parameters by effluent outfall and an overall violation status for a provided NPDES Permit and date range.
2) Use geteffluentchart to retrieve detailed Discharge Limit, DMR and NPDES Violation information for a provided NPDES Permit, date range, effluent parameter, or outfall.
3) Use downloadeffluentchart to generate a Comma Separated Value (CSV) file of the detailed data provided with get_effluent chart, for a provided NPDES Permit, date range, effluent parameter, or outfall.
\
Additional ECHO Resources: Web Services, About ECHO's Data, Data Downloads

All about Numbers. REST access with json/xml/jsonp result support. Below is the documentation for the Numbers API. You can try them out right here. Find more information and subscribe at math.tools

AMBIT REST web services [eNanoMapper profile] with free text & faceted search

About CROssBAR & data
CROssBAR: Comprehensive Resource of Biomedical Relations with Deep Learning Applications and Knowledge Graph Representations
CROssBAR is a comprehensive system that integrates large-scale biomedical data from various resources e.g UniProt, ChEMBL, Drugbank, EFO, HPO, InterPro & PubChem and stores them in a new NoSQL database, enrich these data with deep learning based prediction of relations between numerous biomedical entities, rigorously analyse the enriched data to obtain biologically meaningful modules and display them to the user via easy to interpret, interactive and heterogeneous knowledge graphs.
CROssBAR platform exposes a set of 12 endpoints to query data stored in the CROssBAR database. These endpoints help the user to find data of interest using different parameters provided by the API endpoint.
For example,
https://www.ebi.ac.uk/tools/crossbar/proteins?accession=A0A023GRW5 -> will provide protein information about accession 'A0A023GRW5' including its interactions, functions, cross-references, variations and more.
https://www.ebi.ac.uk/tools/crossbar/activities?moleculeChemblId=CHEMBL465983 -> will provide ChEMBL bio-interactions related information including targets and bio-activity measurements associated with molecule chembl id 'CHEMBL465983'
Knowledge graphs
Another use case of CROssBAR's API endpoints is in building knowledge graphs. These endpoints can be weaved together (output from one API endpoint fed as input to another API endpoint) programmatically to link nodes like protein, disease, drugs etc. as nodes of the graph. The endpoints are designed to be independent from each other which allows users the flexibility to drive biological networks from any facet e.g drug-centric, disease-centric, gene-centric etc. Our service for knowledge graph construction is available at https://crossbar.kansil.org.
An example for the part of the background queries on the CROssBAR API during the construction of a knowledge graph,
(with the aim of keeping the example simple, we have only included the processes related to pathways, genes/proteins and drugs/compounds)
In this example, we would like to find bio-active compounds (with a pChEMBL value threshold of at least 6.0) & drugs targeting all proteins belonging to "WNT ligand biogenesis and trafficking" pathway (based on Reactome pathway annotations).
This can be achieved by using endpoints listed on this swagger documentation as illustrated in following steps-
Find bio-active compounds (with a pChEMBL value threshold of at least 6.0) & drugs targeting all proteins belonging to "WNT ligand biogenesis and trafficking" pathway (based on Reactome annotations)
This can be achieved by using endpoints listed on this swagger documentation as illustrated in following steps-
Get all proteins from “/proteins” API endpoint which have a reactome pathway name equal to "WNT ligand biogenesis and trafficking".
From the collection of uniprot protein accessions collected from step 1 above, we query “/targets” API endpoint to obtain the ‘targetchemblid’s of these proteins.
From the collection of targetchemblids collected from step 2 above, we query “/activities” API endpoint with pChEMBL value >=6, to obtain the ’moleculechemblid’s of the molecules that we need.
From the collection of uniprot protein accessions collected from step 1 above, we find out Drug names and ids from the “/drugs” API endpoint that targets our proteins.
From the collection of ’moleculechemblid’s obtained in step3, we query “/molecules” endpoint to get the compounds that are interacting with the genes/proteins belonging to the “WNT ligand biogenesis and trafficking” pathway.

Overview
FIRST /FMS FRC Events API is a service to return relevant information about the FIRST Robotics Competition (FRC). Information is made available from events operating around the world.
For FRC, information is made available by the Field Management System (FMS) server operating at each event site. The FMS will attempt to sync all data from the event to "the cloud" as long as internet is available at the venue. If internet is unavailable, or "goes down" during the event, the FMS will automatically sync all data from the time the system was offline as soon as the connection is restored. The API will provide data as soon as it has synced, and we do not add any artificial delays. If you are receiving "stale" data, it may be because of connectivity problems at the venue. We recommend you try again later, and post on the FIRST FMS TeamForge site if the problem persists. (Note: FMS does not sync while a match is running, so data that has to do with a particular match should become available once the score has been revealed to the audience at the event.)
Migration and Program Notes:
Pay close attention to the addresses for calling the various endpoints- as well as the notes regarding endpoints with multiple possible responses (i.e. score details and rankings).
Documentation Notes
All times are listed in the local time to the event venue. HTTP-date values will show their timezone.
If you specify a parameter, but no value for that parameter, it will be ignored. For example, if you request URL?teamNumber= the teamNumber parameter would be ignored.
We will continue to support the current version of the API plus one version older. Old APIs are depricated once a version "two times newer" is available, at minimum 6 months. For example, version 2.0 and 1.0 are supported right now, but 1.0 will not be supported once 2.1 (or 3.0) is available. Versions may also be retired earlier with prior notice here in the documentation.
The full host address of the API is needed in all calls. The version number is required in each call in order to ensure your requests are made (and responses are returned) in the formats you anticipate. The version number for this documentation is found on the top of the page, in the title. If you call this version number, the API responses will match the formats listed below.
All of the APIs are capable of accepting the Accept HTTP header with either application/xml or application/json based on the desired return type. Any API call that results in an HTTP Status Code other than 200 (OK) will only be shown here as an application/json response to save space, but the content is the same regardless of the request type. All response will have a Content-Length and Date response header, but those are not shown in the documentaiton.
For all APIs that accept a query string in addition to the URI base, the order of parameters do not matter, but the name shown in the documentation must match exactly, as does the associated value format as described in details.
For response codes that are not HTTP 200 (OK), the documentation will show a body message that represents a possible response value. While the "title" of the HTTP Status Code will match those shown in the response codes documentation section exactly, the body of the response will be a more detailed explanation of why that status code is being returned and may not always be exactly as shown in the examples.
None of the APIs will show possible return here in the documentation of HTTP 401 (Unauthorized), but that code applies to all APIs as a possible response if the request is made without a valid token.
Last-Modified, FMS-OnlyModifiedSince, and If-Modified-Since Headers
The FRC Events API utilizes the Last-Modified and If-Modified-Since Headers to communicate with consumers regarding the age of the data they are requesting. With a couple of exceptions, all calls will return a Last-Modified Header set with the time at which the data at that endpoint was last modified. The Header will always be set in the HTTP-date format, as described in the HTTP Protocol. There are two exceptions: the Last-Modified Header is not set if the endpoint returns no results (such as a request for a schedule with no matches) and will also not be set if the request was an HTTP DELETE.
Consumers should keep track of the Last-Modified Header, and return it on subsequent calls to the same endpoint as the If-Modified-Since. The server will recognize this request, and will only return a result if the data has been modified since the last request. If no changes have been made, an HTTP 304 will be returned. If data has been modified, ALL data on that call will be returned (for "only modified" data, see below).
The FRC Events API also allows a custom header used to filter the return data to a specific subset. This is done by specifying a FMS-OnlyModifiedSince header with each call. As with the If-Modified-Since header, consumers should keep track of the Last-Modified Header, and return it on subsequent calls to the same endpoint as the FMS-OnlyModifiedSince Header. The server will recognize this request, and will only return a result if the data has been modified since the last request, and, if returned, the data will only be those portions modified since the included date. If no changes, have been made, an HTTP 304 will be returned. Using this method, the server and consumer save processing time by only receiving modified data that is in need of update on the consumer side.
If the Headers are improperly passed (such as the wrong Day of Week for the matching date, or a date in the future), the endpoint will simply ignore the Header and return all results. If both headers are specified, the request will be denied.
Response Codes
The FRC Events API HTTP Status Codes correspond with the common codes, but occasionally with different "titles". The "title" used by the API is shown next to each of the below possible response HTTP Status Codes. Throughout the documentation, Apiary may automatically show the common "title" in example returns (like "Not Found" for 404) but on the production server, the "title" will instead match those listed below.
HTTP 200 - "OK"
The request has succeeded. An entity corresponding to the requested resource is sent in the response. This will be returned as the HTTP Status Code for all request that succeed, even if the body is empty (such as an event that has no rankings, but with a valid season and event code were used)
HTTP 304 - "Not Modified"
When utilizing a Header that allows filtered data returns, such as If-Modified-Since, this response indicates that no data meets the request.
HTTP 400 - "Invalid Season Requested"/"Malformed Parameter Format In Request"/"Missing Parameter In Request"/"Invalid API Version Requested":
The request could not be understood by the server due to malformed syntax. The client SHOULD NOT repeat the request without modifications. Specifically for this API, a 400 response indicates that the requested URI matches with a valid API, but one or more required parameter was malformed or invalid. Examples include an event code that is too short or team number that contains a letter.
HTTP 401 - "Unauthorized"
All requests against the API require authentication via a valid user token. Failing to provide one, or providing an invalid one, will warrant a 401 response. The client MAY repeat the request with a suitable Authorization header field.
HTTP 404 - "Invalid Event Requested"
Even though the 404 code usually indicates any not found status, a 404 will only be issued in this API when an event cannot be found for the requested season and event code. If the request didn't match a valid API or there were malformed parameters, the response would not receive a 404 but rather a 400 or 501. If this HTTP code is received, the season was a valid season and the event code matched the acceptable style of an event code, but there were no records of an event matching the combination of that season and event code. For example, HTTP 404 would be issued when the event had a different code in the requested season (the codes can change year to year based on event location).
HTTP 500 - "Internal Server Error"
The server encountered an unexpected condition which prevented it from fulfilling the request. This is a code sent directly by the server, and has no special alternate definition specific to this API.
HTTP 501 - "Request Did Not Match Any Current API Pattern"
The server does not support the functionality required to fulfill the request. Specifically, the request pattern did not match any of the possible APIs, and thus processing was discontinued. This code is also issued when too many optional parameters were included in a single request and fulfilling it would make the result confusing or misleading. Each API will specify which parameters or combination of parameters can be used at the same time.
HTTP 503 - "Service Unavailable"
The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay MAY be indicated in a Retry-After header. This code will not always appear, sometimes the server may outright refuse the connection instead. This is a code sent directly by the server, and has no special alternate definition specific to this API.
See the notes at the top of this documentation for important information about HTTP Status Codes.
Authorization
In order to make calls against the FRC Events API, you must include an HTTP Header called Authorization with the value set as specified below. If a request is made without this header, processing stops and an HTTP 401 is issued. All Authorization headers follow the same format:
Authorization: Basic 000000000000000000000000000000000000000000000000000000000000
Where the Zeros are replaced by your Token. The Token can be formed by taking your username and your AuthorizationKey and adding a colon. For example, if your username is sampleuser and your AuthorizationKey is 7eaa6338-a097-4221-ac04-b6120fcc4d49 you would have this string:
sampleuser:7eaa6338-a097-4221-ac04-b6120fcc4d49
This string must then be encoded using Base64 Encoded to form the Token, which will be the same length as the example above, but include letters and numbers. For our example, we would have:
c2FtcGxldXNlcjo3ZWFhNjMzOC1hMDk3LTQyMjEtYWMwNC1iNjEyMGZjYzRkNDk=
NOTICE : Publicly distributing an application, code snippet, etc, that has your username and token in it, encoded or not, WILL result in your token being blocked from the API. Each user should apply for their own token.
If you wish to acquire a token for your development, you may do so by requesting a token through our automated system on this website.
AUTOMATED REMOVAL : If you do not activate your account within 72 hours of making your request for a token, or if you do not make at least one API request every twelve (12) months, your account/token will be marked as disabled for inactivity and subject to being deleted. (This policy does not apply to accounts with special operating agreements with FIRST)
HTTP401 and Authorization
Each Token can be individually enabled and disabled by FIRST. As such, a normally valid combination of username and AuthorizationToken could still be rejected. The possible return messages you may see in these instances are:
Incorrect Token (You supplied an AuthorizationToken, but it wasn't correct)
Account Disabled, Contact Support (You have been disabled for excessive traffic or abuse. Contact support)
Username Not Found (A username was found, but didn't match any on file)
Unable To Determine Authorization Token (The format of the Authorization header was incorrect)