Mock sample for your project: Madhya Pradesh Medical Science University, Jabalpur M.P., Madhya Pradesh API
Integrate with "Madhya Pradesh Medical Science University, Jabalpur M.P., Madhya Pradesh API" from apisetu.gov.in in no time with Mockoon's ready to use mock sample
Madhya Pradesh Medical Science University, Jabalpur M.P., Madhya Pradesh
apisetu.gov.in
Version: 3.0.0
Start working with "Madhya Pradesh Medical Science University, Jabalpur M.P., Madhya Pradesh API" right away by using this ready-to-use mock sample. API mocking can greatly speed up your application development by removing all the tedious tasks or issues: API key provisioning, account creation, unplanned downtime, etc.
It also helps reduce your dependency on third-party APIs and improves your integration tests' quality and reliability by accounting for random failures, slow response time, etc.
Description
Migration certificate issued from 2018 onward can now be fetched by Citizens in their DigiLocker account.
Other APIs by apisetu.gov.in
Transport Department, Puducherry
apisetu.gov.in
Driving License (DL) and Vehicle Registration Certificate (RC) of the State, as available on Parivahan Sewa (http://parivahan.co.in/) of Ministry of Road Transport and Highways, are available on DigiLocker. Citizens can pull these documents into their DigiLocker accounts.
Bharti AXA General Insurance Company Ltd.
apisetu.gov.in
APIs provided by Bharti AXA General Insurance Company Ltd..
Department of IT and BT, Karnataka
apisetu.gov.in
eSigned certificates issued by Department of Information Technology, Biotechnology and Science &Technology (http://itbt.karnataka.gov.in/pages/home.aspx) can be downloaded through DigiLocker.
Employees' Provident Fund Organization
apisetu.gov.in
Pension Payment Order and UAN, as provided by EPFO (https://www.epfindia.gov.in), can be downloaded in citizen's DigiLocker account.
National Institute of Open Schooling
apisetu.gov.in
National Institute of Open Schooling (NIOS) is issuing marksheets, Provisional certificates, migration certificates through DigiLocker. These can be pulled by students into their DigiLocker accounts. Currently available - 2010 - 2020 [Class XII & Class Xth]
Meghalaya Board of School Education, Tura, Meghalaya
apisetu.gov.in
Meghalaya Board of School Education (MBOSE) with Marksheets of Class Xth and Class XIIth (Arts , Science, Commerce and Vocational), is availablke on DigiLocker for the students of 2015-2019.
Transport Department, Rajasthan
apisetu.gov.in
Driving License (DL) and Vehicle Registration Certificate (RC) of the State, as available on Parivahan Sewa (http://parivahan.co.in/) of Ministry of Road Transport and Highways, are available on DigiLocker. Citizens can pull these documents into their DigiLocker accounts.
Tata AIG General Insurance Company Ltd.
apisetu.gov.in
Insurance policies issued by Tata AIG (https://www.tataaig.com) that are available can be fetched by Customers into their DigiLocker accounts.
Karnataka Department of Transport, Karnataka
apisetu.gov.in
Driving License (DL) & Vehicle Registration Certificate (RC) as issued by Transport Department, Government of Karnataka (http://transport.karnataka.gov.in) can be pulled by citizens into their DigiLocker accounts.
eDistrict Odisha, Odisha
apisetu.gov.in
eDistrict Odisha (http://edistrictodisha.gov.in/) is the online service delivery portal for Odisha State Govt. Certain documents issued by it (e.g. Income, Caste, Residence Certificates etc) are made available in citizens' DigiLocker accounts.
Dr. A. P. J. Abdul Kalam Technical University, Lucknow, Uttar Pradesh
apisetu.gov.in
Marksheets and Degree Certificates of academic year 2017-18 issued by AKTU can be pulled by students into their DigiLocker accounts
Other APIs in the same category
NSIDC Web Service Documentation Index
nsidc.org
This API allows programmers to build National Snow and Ice Data Center data and metadata services into their applications.
They Said So Quotes API
They Said So Quotes API offers a complete feature rich REST API access to its quotes platform. This is the documentation for the world famous quotes API. If you are a subscriber and you are trying this from a console add 'X-TheySaidSo-Api-Secret' header and add your api key as the header value. You can test and play with the API right here on this web page. For using the private end points and subscribing to the API please visit https://theysaidso.com/api.
Books API
The Books API provides information about book reviews and The New York Times bestsellers lists.
DriveBC's Open511 API
This API is DriveBC's implementation of the Open511 specification. It provides information about known road events (traffic accidents, construction, etc.) in British Columbia, Canada. Please note that you may experience issues when submitting requests to the delivery or test environment if using this OpenAPI specification in other API console viewers.
GeoMark Web Service REST API
The Geomark Web Service allows you to create and share geographic areas of interest over the web in a variety of formats and coordinate systems. This service is especially helpful when you need to share an area of interest with people who require that the data be in a different format, or they use different mapping software.
Please note that you may experience issues when submitting requests to the delivery or test environment if using this OpenAPI specification in other API console viewers.
Please note that you may experience issues when submitting requests to the delivery or test environment if using this OpenAPI specification in other API console viewers.
U.S. EPA Enforcement and Compliance History Online (ECHO) - Effluent Charting and Reporting
Enforcement and Compliance History Online (ECHO) is a tool developed and maintained by EPA's Office of Enforcement and Compliance Assurance for public use.
ECHO provides integrated compliance and enforcement information for over 1 million regulated facilities nationwide.
EFF Rest Services provides the data for ECHO's Effluent Charts, a set of dynamic charts and tables of permitted effluent limits, releases, and violations over time for Clean Water Act (CWA) wastewater discharge permits issued under the National Pollutant Discharge Elimination System (NPDES).
See Effluent Charts Help (https://echo.epa.gov/help/reports/effluent-charts-help) for additional information.
\
The are 3 service end points for Effluent Charts: getsummarychart, geteffluentchart, and downloadeffluentchart.
\
1) Use getsummarychart to retrieve a summary matrix of effluent parameters by effluent outfall and an overall violation status for a provided NPDES Permit and date range.
2) Use geteffluentchart to retrieve detailed Discharge Limit, DMR and NPDES Violation information for a provided NPDES Permit, date range, effluent parameter, or outfall.
3) Use downloadeffluentchart to generate a Comma Separated Value (CSV) file of the detailed data provided with get_effluent chart, for a provided NPDES Permit, date range, effluent parameter, or outfall.
\
Additional ECHO Resources: Web Services, About ECHO's Data, Data Downloads
ECHO provides integrated compliance and enforcement information for over 1 million regulated facilities nationwide.
EFF Rest Services provides the data for ECHO's Effluent Charts, a set of dynamic charts and tables of permitted effluent limits, releases, and violations over time for Clean Water Act (CWA) wastewater discharge permits issued under the National Pollutant Discharge Elimination System (NPDES).
See Effluent Charts Help (https://echo.epa.gov/help/reports/effluent-charts-help) for additional information.
\
The are 3 service end points for Effluent Charts: getsummarychart, geteffluentchart, and downloadeffluentchart.
\
1) Use getsummarychart to retrieve a summary matrix of effluent parameters by effluent outfall and an overall violation status for a provided NPDES Permit and date range.
2) Use geteffluentchart to retrieve detailed Discharge Limit, DMR and NPDES Violation information for a provided NPDES Permit, date range, effluent parameter, or outfall.
3) Use downloadeffluentchart to generate a Comma Separated Value (CSV) file of the detailed data provided with get_effluent chart, for a provided NPDES Permit, date range, effluent parameter, or outfall.
\
Additional ECHO Resources: Web Services, About ECHO's Data, Data Downloads
EU BON UTIS
cybertaxonomy.eu
The Unified Taxonomic Information Service (UTIS) is the taxonomic backbone for the EU-BON project
Lumminary API
lumminary.com
Introduction
The Lumminary API was built to allow third parties to interact with Lumminary customers and gain access to their genetic data. The Lumminary API is fast, scalable and highly secure. All requests to the Lumminary API take place over SSL, which means all communication of Customer data is encrypted.
Before we dive in, some definitions. This is what we mean by:
|Term|Definition|
|-----------|-----------|
|Third party|A third party (also referred to as "partner" or as "you") is a company which offers services and products using genetic data.|
|Lumminary clients|The Lumminary client (also referred to as "customer") is an individual who has created an account on the Lumminary platform.|
|Lumminary|This is us - our services including the Lumminary platform, the API, the DNA App Store, the DNA Vault, the "Connect with Lumminary" button, and the website in its totality. |
|CWL|This is the acronym for the "Connect with Lumminary" button.|
|dataset|This is the term we use when we refer to a customer's genetic data.|
|Lumminary API|This is a library/module that you can use to integrate your apps with the Lumminary platform.|
|Lumminary toolkit|This is a stand alone application which helps you integrate with Lumminary without writing any code or interacting with the Lumminary API.|
Let's dive in, now.
Overview
Install Lumminary API Client and Toolkit
Obtaining credentials
Query customers authorizations
Query customer genetic data
Submit reports
"Connect with Lumminary" button
API specs
Overview
In order to use Lumminary services, you'll need to install the Lumminary API Client or Toolkit. The Lumminary API Client and Toolkit are available in multiple programming languages, and we also provide a sandbox environment which you can use for integration and tests.
There are a couple of differences between the API Client and the Toolkit. Mainly, it's about the ease of use for integration. The Toolkit is basically a stand-alone application that facilitates the integration with the Lumminary API without the need to modify your already existing code.
You use the Lumminary API Client when you want to integrate it inside your own application. This means it gives you full flexibility regarding the integration into your own workflow.
You use the Lumminary Toolkit for an integration where the Toolkit is placed alongside your own application. You can use the Toolkit from the CLI - for example, to run a cronjob that processes incoming orders. The Toolkit uses the Lumminary API Client.
Install Lumminary API Client and/or Toolkit
We provide the Lumminary API Client and Toolkit in multiple programming languages - default are PHP (minimum version 7.0), Python2.7 and Python3. However, if you need them in another language (Java, Obj-C, JavaScript, C#, Perl, CURL), please contact us.
How to install the Lumminary API Client
PHP example:
The PHP Lumminary API Client is available at: https://github.com/Lumminary/lumminary-api-client-php
If you are already using Composer, you can import the project by adding the following to your composer.json
| Error Id | Error Message |
|:-----------------:|:---------------------------------------------------------------------------------------------|
| 1 | Invalid Security Token |
| 2 | Invalid Access Scopes |
| 3 | Customer refuses your request (this happens when the customer cancels instead of granting access) |
The Lumminary API was built to allow third parties to interact with Lumminary customers and gain access to their genetic data. The Lumminary API is fast, scalable and highly secure. All requests to the Lumminary API take place over SSL, which means all communication of Customer data is encrypted.
Before we dive in, some definitions. This is what we mean by:
|Term|Definition|
|-----------|-----------|
|Third party|A third party (also referred to as "partner" or as "you") is a company which offers services and products using genetic data.|
|Lumminary clients|The Lumminary client (also referred to as "customer") is an individual who has created an account on the Lumminary platform.|
|Lumminary|This is us - our services including the Lumminary platform, the API, the DNA App Store, the DNA Vault, the "Connect with Lumminary" button, and the website in its totality. |
|CWL|This is the acronym for the "Connect with Lumminary" button.|
|dataset|This is the term we use when we refer to a customer's genetic data.|
|Lumminary API|This is a library/module that you can use to integrate your apps with the Lumminary platform.|
|Lumminary toolkit|This is a stand alone application which helps you integrate with Lumminary without writing any code or interacting with the Lumminary API.|
Let's dive in, now.
Overview
Install Lumminary API Client and Toolkit
Obtaining credentials
Query customers authorizations
Query customer genetic data
Submit reports
"Connect with Lumminary" button
API specs
Overview
In order to use Lumminary services, you'll need to install the Lumminary API Client or Toolkit. The Lumminary API Client and Toolkit are available in multiple programming languages, and we also provide a sandbox environment which you can use for integration and tests.
There are a couple of differences between the API Client and the Toolkit. Mainly, it's about the ease of use for integration. The Toolkit is basically a stand-alone application that facilitates the integration with the Lumminary API without the need to modify your already existing code.
You use the Lumminary API Client when you want to integrate it inside your own application. This means it gives you full flexibility regarding the integration into your own workflow.
You use the Lumminary Toolkit for an integration where the Toolkit is placed alongside your own application. You can use the Toolkit from the CLI - for example, to run a cronjob that processes incoming orders. The Toolkit uses the Lumminary API Client.
Install Lumminary API Client and/or Toolkit
We provide the Lumminary API Client and Toolkit in multiple programming languages - default are PHP (minimum version 7.0), Python2.7 and Python3. However, if you need them in another language (Java, Obj-C, JavaScript, C#, Perl, CURL), please contact us.
How to install the Lumminary API Client
PHP example:
The PHP Lumminary API Client is available at: https://github.com/Lumminary/lumminary-api-client-php
If you are already using Composer, you can import the project by adding the following to your composer.json
| Error Id | Error Message |
|:-----------------:|:---------------------------------------------------------------------------------------------|
| 1 | Invalid Security Token |
| 2 | Invalid Access Scopes |
| 3 | Customer refuses your request (this happens when the customer cancels instead of granting access) |
