Mock sample for your project: Food and Supplies Department, Haryana API

Birth, Still-Birth, Death and Marriage Certificates issued by the Department, from 01 January 2014 onward, can be pulled into citizens' DigiLocker accounts.

Insurance policies issued by ICICI Lombard (https://www.icicilombard.com) can be fetched by Citizens into their DigiLocker accounts.

Marksheets and Degree Certificates of academic year 2017-18 issued by AKTU can be pulled by students into their DigiLocker accounts

Public distribution system (PDS) is an Indian food security system. Established by the Government of India under Ministry of Consumer Affairs, Food, and Public Distribution and managed jointly with state governments in India. Jharkhand PDS Ration Card Certificates is available in Digilocker for Citizen.

Insurance policies issued by Acko General Insurance (https://www.acko.com) can be fetched by the citizens in their Digilocker accounts.

Registration Certificate, Duplicate Registration Certificate, Good Standing Certificate, Registration Renewal, Tatkal Registration, Tatkal Registration Renewal and Upadhi/Certificate as issued by MP Paramedical Council (http://www.mppmc.ac.in) from April 2017 onwards can be pulled into citizens' DigiLocker accounts.

eDistrict Tripura (http://edistrict.tripura.gov.in/) is the online service delivery portal for TripuraState Govt. Certain documents issued by it (e.g. Income, Caste Certificates etc) can be pulled into citizens' DigiLocker accounts.

APIs provided by eDistrict Odisha ServicePlus, Odisha.

General Insurance policies such as Motor, Health, Travel, Property, Engineering e.t.c issued by The Oriental Insurance are available to be pulled for citizens of India.

Tamilnadu - Government Examinations (https://dgecert.tn.nic.in/) is issuing Mark Certificates through DigiLocker. These can be pulled by students into their DigiLocker accounts. Currently Class X (2016-2019) and XII (2016-2018) marksheets are available.

Driving License (DL) and Vehicle Registration Certificate (RC) of the State, as available on Parivahan Sewa (http://parivahan.co.in/) of Ministry of Road Transport and Highways, are available on DigiLocker. Citizens can pull these documents into their DigiLocker accounts.

Insurance policies such as health, car, two wheeler, property etc. issued by BAGIC are available to be pulled by citizens.

More than 8 Crore PM-JAY e-cards are now available on DigiLocker.Beneficiaries can access PMJAY e-cards on their respective Digilocker account under issued document section.

Certificates and Marksheets of the training conducted by Indian Navy are available to the Officers/ Sailors in their DigiLocker accounts.

A web service for near earth objects. All the data is from the NASA JPL Asteroid team.
NeoWs is proud to power AsteroidTracker on iOS and Android as well as related apps.
Follow us on Twitter

The Veteran Confirmation API allows you to confirm Veteran status for a given person. This can be useful for offering Veterans discounts or other benefits.
The API will only return “Confirmed” or “Not Confirmed”.
Quickstart Guide
1. Get Access Credentials
Get started by filling out the form on the Apply for VA Lighthouse Developer Access page.
After submitting a request, you will receive your credentials for using the API in the Development environment, which allows you to try it out with mock data before moving to the Production environment.
2. Test the API
In the endpoint documentation below, we've provided a curl command builder for trying out the API before implementation with your app.
Use Test User attributes to populate the request body.
3. Build your app
The base URI for the Veteran Confirmation API in the Sandbox environment is:
https://sandbox-api.va.gov/services/veteran_confirmation/v0
In this environment, use attributes from the list of Test Users. Only Test Users can return a "confirmed" response.
Check out some of our sample apps. Please visit our VA Lighthouse Support portal should you need further assistance.
4. Show us a demo and get access to the Production environment
After building your app, we ask that you give us a demo before we set you up with production credentials. Please see the Path to Production page for more details.
Authorization
This API requires an API key in combination with identifiable information for the person being confirmed listed below. API requests are authorized through a symmetric API token provided in an HTTP header with name apikey. Including more information has a better chance of making a match and returning a Confirmed status.
Required information:
First Name
Last Name
Date of Birth
Social Security Number
Optional information:
Middle Name
Gender
Reference
Sandbox vs. Production Data
APIs accessed via the Sandbox environment are using the same underlying logic as VA’s production APIs; only the underlying data store is different.
Master Veteran Index (MVI)
The Master Veteran Index confirms a user's identity. In Production, several factors are considered to confirm identity. These include: a user’s first name, last name, date of birth and Social Security number. The MVI is mocked in the Sandbox environment. In this environment, the only factor used to confirm identity is the Social Security number.
Rate Limiting
We implemented basic rate limiting of 60 requests per minute. If you exceed this quota, your request will return a 429 status code. You may petition for increased rate limits by emailing and requests will be decided on a case by case basis.
Raw Open API Spec
https://api.va.gov/services/veteran_confirmation/docs/v0/api

News API

This is the api to access the ODWeather API information

An API exposing details of the treaties laid before Parliament.

Last Modified: Thu Oct 29 12:30:46 PDT 2020
All endpoints are only accessible via HTTPS.
All API endpoints are located at https://platform.climate.com (e.g.
https://platform.climate.com/v4/fields).
The authorization token endpoint is located at
https://api.climate.com/api/oauth/token.
Troubleshooting
X-Http-Request-Id response header will be returned on every call,
successful or not. If you experience an issue with our api and need
to contact technical support, please supply the value of the X-Http-Request-Id
header along with an approximate time of when the request was made.
Request Limits
When you’re onboarded to Climate’s API platform, your x-api-key is assigned a custom usage plan. Usage plans are unique to each partner and have the following key attributes:
Throttling information
burstLimit: Maximum rate limit over a period ranging from 1 second to a few seconds
rateLimit: A steady-state rate limit
Quota information
Limit: The maximum number of requests that can be made in a given month
When the request rate threshold is exceeded, a 429 response code is returned. Optionally, the Retry-After header may be returned:
Following are examples of rate limit errors:
Rate limit exceeded:
HTTP/1.1 429
Content-Type: application/json
Content-Length: 32
{"message":"Too Many Requests"}
Quota exhausted:
HTTP/1.1 429
Content-Type: application/json
Content-Length: 29
{"message":"Limit Exceeded"}
Pagination
Pagination is performed via headers. Any request which returns a "results"
array may be paginated. The following figure shows how query results are laid out with
X-Limit=4 and no filter applied.
If there are no results, a response code of 304 will be returned.
If the response is the last set of results, a response code of 200 or
206 will be returned.
If there are more results, a response code of 206 will be returned.
If X-Next-Token is provided in the request headers but the token has
expired, a response code of 409 will be returned. This is only applicable
for some endpoints; see specific endpoint documentation below.
X-Limit
The page size can be controlled with the X-Limit header. Valid values are
1-100 and defaults to 100.
X-Next-Token
If the results are paginated, a response header of X-Next-Token will be
returned. Use the associated value in the subsequent request (via the X-Next-Token
request header) to retrieve the next page. The following sequence diagram shows how to
use X-Next-Token to fetch all the records.
Chunked Uploads
Uploads larger than 5MiB (5242880 bytes) must be done in 5MiB chunks
(with the exception of the final chunk). Each chunk request MUST contain a
Content-Range header specifying the portion of the upload, and a Content-Type
header specifying binary content type (application/octet-stream). Range
uploads must be contiguous. The maximum upload size is capped at 500MiB (524288000 bytes).
Chunked Downloads
Downloads larger than 5MiB (5242880 bytes) must be done in 1-5MiB
chunks (with the exception of the final chunk, which may be less than 1MiB).
Each chunk request MUST contain a Range header specifying the requested portion of the download,
and an Accept header specifying binary and json content types (application/octet-stream,application/json)
or all content types (/).
Drivers
If you need drivers to process agronomic data, download the ADAPT plugin below. We only support the plugin in the Windows environment, minimum is Windows 7 SP1.
For asPlanted, asHarvested and asApplied data:
ADAPT Plugin
Release notes can be found here.
Download and use of the ADAPT plugin means that you agree to the EULA for use of the ADAPT plugin.
Please review the EULA (last updated on June 6th, 2019) before download and use of the ADAPT plugin.
For more information, please refer to:
ADAPT Resources
ADAPT Overview
ADAPT FAQ
ADAPT Videos
Sample Test Data
Sample agronomic data:
asPlanted and asHarvested data
asApplied data set 1
asApplied data set 2
To upload the sample data to your account, please follow the instructions in this link.
Sample soil data:
Sample soil data

This REST API provides searchable access to information about geographical names in the province of British Columbia, including name status and details about the corresponding geographic feature.
Please note that you may experience issues when submitting requests to the delivery or test environment if using this OpenAPI specification in other API console viewers.

Enforcement and Compliance History Online (ECHO) is a tool developed and maintained by EPA's Office of Enforcement and Compliance Assurance for public use. ECHO provides integrated compliance and enforcement information for over 1 million regulated facilities nationwide.
Air Rest Services provides multiple service endpoints, each with specific capabilities, to search and retrieve data on facilities regulated under the Clean Air Act (CAA). The returned results reflect data drawn from EPA's ICIS-Air database.
The getfacilities, getmap, getqid, and getdownload end points are meant to be used together, while the enhanced getfacilityinfo end point is self contained.
The getfacilityinfo end point returns either an array of state, county or zip clusters with summary statistics per cluster or an array of facilities.
The recommended use scenario for getfacilities, getqid, getmap, and getdownoad is:
1) Use getfacilities to validate passed query parameters, obtain summary statistics and to obtain a queryid (QID). QIDs are time sensitive and will be valid for approximately 30 minutes.
2) Use get_qid, with the returned QID, to paginate through arrays of facility results.
3) Use get_map, with the returned QID, to zoom in/out and pan on the clustered and individual facility coordinates that meet the QID query criteria.
4) Use get_download, with the returned QID, to generate a Comma Separated Value (CSV) file of facility information that meets the QID query criteria.
Use the qcolumns parameter to customize your search results. Use the Metadata service endpoint for a list of available output objects, their Column Ids, and their definitions to help you build your customized output.
Additional ECHO Resources: Web Services, About ECHO's Data, Data Downloads