Mock sample for your project: Directorate of Information Technology, Government of Tripura, Tripura API
Integrate with "Directorate of Information Technology, Government of Tripura, Tripura API" from apisetu.gov.in in no time with Mockoon's ready to use mock sample
Directorate of Information Technology, Government of Tripura, Tripura
apisetu.gov.in
Version: 3.0.0
Speed up your application development by using "Directorate of Information Technology, Government of Tripura, Tripura API" ready-to-use mock sample. Mocking this API will help you accelerate your development lifecycles and allow you to stop relying on an external API to get the job done. No more API keys to provision, accesses to configure or unplanned downtime, just work.
Enhance your development infrastructure by mocking third party APIs during integrating testing.
Description
eDistrict Tripura (http://edistrict.tripura.gov.in/) is the online service delivery portal for TripuraState Govt. Certain documents issued by it (e.g. Income, Caste Certificates etc) can be pulled into citizens' DigiLocker accounts.
Other APIs by apisetu.gov.in
Food, Civil Supplies and Consumer Affairs Department, Karnataka
apisetu.gov.in
Ration Cards issued by Food, Civil Supplies and Consumer Affairs Department, Karnataka (https://ahara.kar.nic.in) are available for download on DigiLocker.
Tata AIG General Insurance Company Ltd.
apisetu.gov.in
Insurance policies issued by Tata AIG (https://www.tataaig.com) that are available can be fetched by Customers into their DigiLocker accounts.
Himachal Pradesh Department of Revenue, Himachal Pradesh
apisetu.gov.in
Lok Praman Patra (http://admis.hp.nic.in/epraman/) is the online service delivery portal by Himachal Pradesh Govt. Certain documents issued by it (e.g. Bonafide, Dogra Class, Income, Character Certificates etc.) can be pulled into citizens' DigiLocker accounts.
University Of Delhi
apisetu.gov.in
University of Delhi (http://www.du.ac.in/) is issuing Degree certificates through DigiLocker. These can be pulled by students into their DigiLocker accounts. Currently data for 2017 is available.
Ministry of Skill Development And Entrepreneurship
apisetu.gov.in
National Council for Vocational Training (NCVT) under Ministry of Skill Development And Entrepreneurship has been entrusted with the responsibilities of prescribing standards and curricula for craftsmen training and conducting All India Trade Tests and awarding National Trade Certificates. All the ITI certificates under the purview of NCVT are available to download through Citizen's DigiLocker account.
Directorate of Economics and Statistics Cum Chief Registrar, Rajasthan, Rajasthan
apisetu.gov.in
Birth, Still-Birth, Death and Marriage Certificates issued by the Department, from 01 January 2014 onward, can be pulled into citizens' DigiLocker accounts.
Mizoram Police, Mizoram
apisetu.gov.in
Identification cards, as issued by Mizoram Police to its personnels, can be downloaded by them in their DigiLocker accounts
GMCH, Chandigarh
apisetu.gov.in
Government Medical College and Hospital (GMCH), Chandigarh provides patient's clinical laboratory reports to DigiLocker.
Reliance General Insurance Company Ltd
apisetu.gov.in
Insurance policies issued by Reliance General Insurance Company Limited is available on DigiLocker at (https://www.reliancegeneral.co.in) can be fetched by Citizens into their DigiLocker accounts
Institute of Company Secretaries of India
apisetu.gov.in
Institute of Company Secretaries of India is available on DigiLocker. ID Card is available for candidates to pull into their DigiLocker account. ICSI members can also pull their ACS certificates into their DigiLocker account.
Revenue Department - Land Records, Karnataka
apisetu.gov.in
APIs provided by Revenue Department - Land Records, Karnataka.
Department of IT and BT, Karnataka
apisetu.gov.in
eSigned certificates issued by Department of Information Technology, Biotechnology and Science &Technology (http://itbt.karnataka.gov.in/pages/home.aspx) can be downloaded through DigiLocker.
Other APIs in the same category
eDistrict Uttar Pradesh, Uttar Pradesh
apisetu.gov.in
eDistrict UP (http://edistrict.up.nic.in/) is the online service delivery portal for UP State Govt. Certain documents issued by it (e.g. Birth, Income, Caste Certificates etc) can be pulled into citizens' DigiLocker accounts.
eNanoMapper database
AMBIT REST web services [eNanoMapper profile] with free text & faceted search
GlobalWineScore API Documentation
globalwinescore.com
The GlobalWineScore API is designed as a RESTful API, providing several resources and methods depending on your usage plan.
For further information please refer to our plans.
Authentication
The API uses token-based authentication.
In order to authenticate your requests, you need to include a specific header in each of your requests:
The word Token must be written. Your requests must also use the HTTPS protocol.
If you don't have a token yet, you need to apply for one here.
Your personal token can be found under the My account > API section of the GlobalWineScore website
Format
The API provides several rendering formats which you can control using the Accept header or format query parameter.
JSON (default): no header or Accept: application/json
XML: Accept: application/xml
Rate limiting
For API requests, the rate limit allows for up to 10 requests per minute.
Error handling
Whether a request succeeded is indicated by the HTTP status code. A 2xx status code indicates success, whereas a 4xx status code indicates failure.
When a request fails, the response body is still JSON, but always contains a detail field with a description of the error, which you can inspect for debugging.
For example, trying to access the API without proper authentication will return code 403 along with the message:
{"detail": "Authentication credentials were not provided."}
Found a bug ? send us an email at [email protected]
Ordering
At the moment, GlobalWineScores may be sorted by date and score. Use "-"
to sort in descending order.
Continuous synchronization
If you need to synchronize your database with our API, you can query our API using ?ordering=-date to get the newest scores first, which means you won't have to crawl the whole catalog every time :-)
Quick search interface
If you need to search our catalog (e.g. to align it with yours), we're providing you with a handy interface accessible here: https://api.globalwinescore.com/search/
You need to be logged in (email/password) to access this page, but other than that you can share it with anyone in your team and start searching right away !
Resources
The details about available endpoints can be found below.
You can click on each endpoint to find information about their parameters.
For further information please refer to our plans.
Authentication
The API uses token-based authentication.
In order to authenticate your requests, you need to include a specific header in each of your requests:
The word Token must be written. Your requests must also use the HTTPS protocol.
If you don't have a token yet, you need to apply for one here.
Your personal token can be found under the My account > API section of the GlobalWineScore website
Format
The API provides several rendering formats which you can control using the Accept header or format query parameter.
JSON (default): no header or Accept: application/json
XML: Accept: application/xml
Rate limiting
For API requests, the rate limit allows for up to 10 requests per minute.
Error handling
Whether a request succeeded is indicated by the HTTP status code. A 2xx status code indicates success, whereas a 4xx status code indicates failure.
When a request fails, the response body is still JSON, but always contains a detail field with a description of the error, which you can inspect for debugging.
For example, trying to access the API without proper authentication will return code 403 along with the message:
{"detail": "Authentication credentials were not provided."}
Found a bug ? send us an email at [email protected]
Ordering
At the moment, GlobalWineScores may be sorted by date and score. Use "-"
to sort in descending order.
Continuous synchronization
If you need to synchronize your database with our API, you can query our API using ?ordering=-date to get the newest scores first, which means you won't have to crawl the whole catalog every time :-)
Quick search interface
If you need to search our catalog (e.g. to align it with yours), we're providing you with a handy interface accessible here: https://api.globalwinescore.com/search/
You need to be logged in (email/password) to access this page, but other than that you can share it with anyone in your team and start searching right away !
Resources
The details about available endpoints can be found below.
You can click on each endpoint to find information about their parameters.
Climate FieldView Platform APIs
climate.com
Last Modified: Thu Oct 29 12:30:46 PDT 2020
All endpoints are only accessible via HTTPS.
All API endpoints are located at https://platform.climate.com (e.g.
https://platform.climate.com/v4/fields).
The authorization token endpoint is located at
https://api.climate.com/api/oauth/token.
Troubleshooting
X-Http-Request-Id response header will be returned on every call,
successful or not. If you experience an issue with our api and need
to contact technical support, please supply the value of the X-Http-Request-Id
header along with an approximate time of when the request was made.
Request Limits
When you’re onboarded to Climate’s API platform, your x-api-key is assigned a custom usage plan. Usage plans are unique to each partner and have the following key attributes:
Throttling information
burstLimit: Maximum rate limit over a period ranging from 1 second to a few seconds
rateLimit: A steady-state rate limit
Quota information
Limit: The maximum number of requests that can be made in a given month
When the request rate threshold is exceeded, a 429 response code is returned. Optionally, the Retry-After header may be returned:
Following are examples of rate limit errors:
Rate limit exceeded:
HTTP/1.1 429
Content-Type: application/json
Content-Length: 32
{"message":"Too Many Requests"}
Quota exhausted:
HTTP/1.1 429
Content-Type: application/json
Content-Length: 29
{"message":"Limit Exceeded"}
Pagination
Pagination is performed via headers. Any request which returns a "results"
array may be paginated. The following figure shows how query results are laid out with
X-Limit=4 and no filter applied.
If there are no results, a response code of 304 will be returned.
If the response is the last set of results, a response code of 200 or
206 will be returned.
If there are more results, a response code of 206 will be returned.
If X-Next-Token is provided in the request headers but the token has
expired, a response code of 409 will be returned. This is only applicable
for some endpoints; see specific endpoint documentation below.
X-Limit
The page size can be controlled with the X-Limit header. Valid values are
1-100 and defaults to 100.
X-Next-Token
If the results are paginated, a response header of X-Next-Token will be
returned. Use the associated value in the subsequent request (via the X-Next-Token
request header) to retrieve the next page. The following sequence diagram shows how to
use X-Next-Token to fetch all the records.
Chunked Uploads
Uploads larger than 5MiB (5242880 bytes) must be done in 5MiB chunks
(with the exception of the final chunk). Each chunk request MUST contain a
Content-Range header specifying the portion of the upload, and a Content-Type
header specifying binary content type (application/octet-stream). Range
uploads must be contiguous. The maximum upload size is capped at 500MiB (524288000 bytes).
Chunked Downloads
Downloads larger than 5MiB (5242880 bytes) must be done in 1-5MiB
chunks (with the exception of the final chunk, which may be less than 1MiB).
Each chunk request MUST contain a Range header specifying the requested portion of the download,
and an Accept header specifying binary and json content types (application/octet-stream,application/json)
or all content types (/).
Drivers
If you need drivers to process agronomic data, download the ADAPT plugin below. We only support the plugin in the Windows environment, minimum is Windows 7 SP1.
For asPlanted, asHarvested and asApplied data:
ADAPT Plugin
Release notes can be found here.
Download and use of the ADAPT plugin means that you agree to the EULA for use of the ADAPT plugin.
Please review the EULA (last updated on June 6th, 2019) before download and use of the ADAPT plugin.
For more information, please refer to:
ADAPT Resources
ADAPT Overview
ADAPT FAQ
ADAPT Videos
Sample Test Data
Sample agronomic data:
asPlanted and asHarvested data
asApplied data set 1
asApplied data set 2
To upload the sample data to your account, please follow the instructions in this link.
Sample soil data:
Sample soil data
All endpoints are only accessible via HTTPS.
All API endpoints are located at https://platform.climate.com (e.g.
https://platform.climate.com/v4/fields).
The authorization token endpoint is located at
https://api.climate.com/api/oauth/token.
Troubleshooting
X-Http-Request-Id response header will be returned on every call,
successful or not. If you experience an issue with our api and need
to contact technical support, please supply the value of the X-Http-Request-Id
header along with an approximate time of when the request was made.
Request Limits
When you’re onboarded to Climate’s API platform, your x-api-key is assigned a custom usage plan. Usage plans are unique to each partner and have the following key attributes:
Throttling information
burstLimit: Maximum rate limit over a period ranging from 1 second to a few seconds
rateLimit: A steady-state rate limit
Quota information
Limit: The maximum number of requests that can be made in a given month
When the request rate threshold is exceeded, a 429 response code is returned. Optionally, the Retry-After header may be returned:
Following are examples of rate limit errors:
Rate limit exceeded:
HTTP/1.1 429
Content-Type: application/json
Content-Length: 32
{"message":"Too Many Requests"}
Quota exhausted:
HTTP/1.1 429
Content-Type: application/json
Content-Length: 29
{"message":"Limit Exceeded"}
Pagination
Pagination is performed via headers. Any request which returns a "results"
array may be paginated. The following figure shows how query results are laid out with
X-Limit=4 and no filter applied.
If there are no results, a response code of 304 will be returned.
If the response is the last set of results, a response code of 200 or
206 will be returned.
If there are more results, a response code of 206 will be returned.
If X-Next-Token is provided in the request headers but the token has
expired, a response code of 409 will be returned. This is only applicable
for some endpoints; see specific endpoint documentation below.
X-Limit
The page size can be controlled with the X-Limit header. Valid values are
1-100 and defaults to 100.
X-Next-Token
If the results are paginated, a response header of X-Next-Token will be
returned. Use the associated value in the subsequent request (via the X-Next-Token
request header) to retrieve the next page. The following sequence diagram shows how to
use X-Next-Token to fetch all the records.
Chunked Uploads
Uploads larger than 5MiB (5242880 bytes) must be done in 5MiB chunks
(with the exception of the final chunk). Each chunk request MUST contain a
Content-Range header specifying the portion of the upload, and a Content-Type
header specifying binary content type (application/octet-stream). Range
uploads must be contiguous. The maximum upload size is capped at 500MiB (524288000 bytes).
Chunked Downloads
Downloads larger than 5MiB (5242880 bytes) must be done in 1-5MiB
chunks (with the exception of the final chunk, which may be less than 1MiB).
Each chunk request MUST contain a Range header specifying the requested portion of the download,
and an Accept header specifying binary and json content types (application/octet-stream,application/json)
or all content types (/).
Drivers
If you need drivers to process agronomic data, download the ADAPT plugin below. We only support the plugin in the Windows environment, minimum is Windows 7 SP1.
For asPlanted, asHarvested and asApplied data:
ADAPT Plugin
Release notes can be found here.
Download and use of the ADAPT plugin means that you agree to the EULA for use of the ADAPT plugin.
Please review the EULA (last updated on June 6th, 2019) before download and use of the ADAPT plugin.
For more information, please refer to:
ADAPT Resources
ADAPT Overview
ADAPT FAQ
ADAPT Videos
Sample Test Data
Sample agronomic data:
asPlanted and asHarvested data
asApplied data set 1
asApplied data set 2
To upload the sample data to your account, please follow the instructions in this link.
Sample soil data:
Sample soil data
COVID19 Stats
corona-virus-stats.herokuapp.com
Free API documentation to get Real time corona virus stats
Transport Department, Mizoram
apisetu.gov.in
Driving License (DL) and Vehicle Registration Certificate (RC) of the State, as available on Parivahan Sewa (http://parivahan.co.in/) of Ministry of Road Transport and Highways, are available on DigiLocker. Citizens can pull these documents into their DigiLocker accounts.
Transport Department, Meghalaya
apisetu.gov.in
Driving License (DL) and Vehicle Registration Certificate (RC) of the State, as available on Parivahan Sewa (http://parivahan.co.in/) of Ministry of Road Transport and Highways, are available on DigiLocker. Citizens can pull these documents into their DigiLocker accounts.
Transport Department, Tripura
apisetu.gov.in
Driving License (DL) and Vehicle Registration Certificate (RC) of the State, as available on Parivahan Sewa (http://parivahan.co.in/) of Ministry of Road Transport and Highways, are available on DigiLocker. Citizens can pull these documents into their DigiLocker accounts.
OPTIMADE API
optimade.local
The Open Databases Integration for Materials Design (OPTIMADE) consortium aims to make materials databases interoperational by developing a common REST API.
This specification is generated using optimade-python-tools v0.16.0.
This specification is generated using optimade-python-tools v0.16.0.
Movie Reviews API
With the Movie Reviews API, you can search New York Times movie reviews by keyword and get lists of NYT Critics' Picks.
APOD
nasa.gov
This endpoint structures the APOD imagery and associated metadata so that it can be repurposed for other applications. In addition, if the concept_tags parameter is set to True, then keywords derived from the image explanation are returned. These keywords could be used as auto-generated hashtags for twitter or instagram feeds; but generally help with discoverability of relevant imagery
Health Repository Provider Specifications for HIU
The following are the specifications for the APIs to be implemented at the Health Repository end if an entity is only serving the role of a HIU. The specs are essentially duplicates from the Gateway and Bridge, but put together so as to make it clear to HIUs which set of APIs they should implement to participate in the network.
The APIs are organized by the flows - identification, consent flow, data flow and monitoring. They represent the APIs that are expected to be available at the HIU end by the Gateway.
For majority of the APIs, if Gateway has initiated a call, there are corresponding callback APIs on the Gateway. e.g for /consents/hiu/notify API on HIU end, its expected that a corresponding callback API /consents/hiu/on-notify on Gateway is called. Such APIs are organized under the Gateway label.
Gateway relevant APIs for HIUs are grouped under Gateway label. These include the APIs that HIPs are required to call on the Gateway. For example, to request a CM for consent, HIU would call /consent-requests/init API on gateway.
NOTE, in some of the API documentations below, X-HIP-ID is mentioned in header (for example in /auth/on-init). These are the cases, when a particular API is applicable for both HIU and HIP (e.g an entity is playing the role of HRP representing both HIU and HIP). If you are only playing the role of HIP, then only X-HIU-ID header will be sent
The APIs are organized by the flows - identification, consent flow, data flow and monitoring. They represent the APIs that are expected to be available at the HIU end by the Gateway.
For majority of the APIs, if Gateway has initiated a call, there are corresponding callback APIs on the Gateway. e.g for /consents/hiu/notify API on HIU end, its expected that a corresponding callback API /consents/hiu/on-notify on Gateway is called. Such APIs are organized under the Gateway label.
Gateway relevant APIs for HIUs are grouped under Gateway label. These include the APIs that HIPs are required to call on the Gateway. For example, to request a CM for consent, HIU would call /consent-requests/init API on gateway.
NOTE, in some of the API documentations below, X-HIP-ID is mentioned in header (for example in /auth/on-init). These are the cases, when a particular API is applicable for both HIU and HIP (e.g an entity is playing the role of HRP representing both HIU and HIP). If you are only playing the role of HIP, then only X-HIU-ID header will be sent