Mock sample for your project: AIIMS Rishikesh API
Integrate with "AIIMS Rishikesh API" from apisetu.gov.in in no time with Mockoon's ready to use mock sample
AIIMS Rishikesh
apisetu.gov.in
Version: 3.0.0
Start working with "AIIMS Rishikesh API" right away by using this ready-to-use mock sample. API mocking can greatly speed up your application development by removing all the tedious tasks or issues: API key provisioning, account creation, unplanned downtime, etc.
It also helps reduce your dependency on third-party APIs and improves your integration tests' quality and reliability by accounting for random failures, slow response time, etc.
Description
Degree certificates issued by AIIMS Rishikesh in year 2018 can be pulled by students into their DigiLocker accounts
Other APIs by apisetu.gov.in
Motor Vehicle Department, Kerala
apisetu.gov.in
Driving License (DL) and Vehicle Registration Certificate (RC) of the State, as available on Parivahan Sewa (http://parivahan.co.in/) of Ministry of Road Transport and Highways, are available on DigiLocker. Citizens can pull these documents into their DigiLocker accounts.
Directorate of Economics and Statistics Cum Chief Registrar, Rajasthan, Rajasthan
apisetu.gov.in
Birth, Still-Birth, Death and Marriage Certificates issued by the Department, from 01 January 2014 onward, can be pulled into citizens' DigiLocker accounts.
Maharashtra Council of Indian Medicine
apisetu.gov.in
APIs provided by Maharashtra Council of Indian Medicine.
Labour Employment, Skill Development and Entrepreneurship, Mizoram
apisetu.gov.in
APIs provided by Labour Employment, Skill Development and Entrepreneurship, Mizoram.
Kerala State Board of Public Examinations, Kerala
apisetu.gov.in
APIs provided by Kerala State Board of Public Examinations, Kerala.
Punjab School Education Board, Punjab
apisetu.gov.in
Punjab School Education Board (http://www.pseb.ac.in) has made available 2018-20 Class V, VIII, X and XII Certificate cum Detailed Marks Sheet in DigiLocker, which can be pulled by students into their accounts.
Ministry of Skill Development And Entrepreneurship
apisetu.gov.in
National Council for Vocational Training (NCVT) under Ministry of Skill Development And Entrepreneurship has been entrusted with the responsibilities of prescribing standards and curricula for craftsmen training and conducting All India Trade Tests and awarding National Trade Certificates. All the ITI certificates under the purview of NCVT are available to download through Citizen's DigiLocker account.
Directorate of Municipal Administration, Karnataka
apisetu.gov.in
APIs provided by Directorate of Municipal Administration, Karnataka.
Karnataka State Board (Department of Pre University Education), Karnataka
apisetu.gov.in
Department of Pre University Education (http://pue.kar.nic.in) is providing certificates of II PUC (Class XII) March, July 2018 and March 2019 Examination marksheets.
Revenue Department, Odisha
apisetu.gov.in
Revenue Department of Odisha(http://revenueodisha.gov.in/) provides Copy of Registered Deed(Sale, Gift) of year 2010 onward and Copy of Record of Rights (RoR).
Ministry of Road Transport and Highways
apisetu.gov.in
Driving License (DL) & Vehicle Registration Certificate (RC) as available in Ministry of Transport's SARATHI & VAHAN portals (http://morth.nic.in/) can be pulled by citizens into their DigiLocker accounts.
Transport Department, Meghalaya
apisetu.gov.in
Driving License (DL) and Vehicle Registration Certificate (RC) of the State, as available on Parivahan Sewa (http://parivahan.co.in/) of Ministry of Road Transport and Highways, are available on DigiLocker. Citizens can pull these documents into their DigiLocker accounts.
Other APIs in the same category
Department of Legal Metrology, Uttar Pradesh
apisetu.gov.in
Licenses issued by Department of Legal Metrology, Uttar Pradesh can be pulled by citizens into their DigiLocker accounts.
U.S. EPA Enforcement and Compliance History Online (ECHO) - Resource Conservation and Recovery Act
Enforcement and Compliance History Online (ECHO) is a tool developed and maintained by EPA's Office of Enforcement and Compliance Assurance for public use. ECHO provides integrated compliance and enforcement information for over 1 million regulated facilities nationwide.
RCRA Rest Services provides multiple service endpoints, each with specific capabilities, to search and retrieve data on hazardous waste handlers/facilities regulated under the Resource Conservation and Recovery Act (RCRA). The returned results reflect data drawn from EPA's RCRAInfo database.
\
The getfacilities, getmap, getqid, and getdownload end points are meant to be used together, while the enhanced getfacilityinfo end point is self contained.
The getfacilityinfo end point returns either an array of state, county or zip clusters with summary statistics per cluster or an array of facilities.
\
The recommended use scenario for getfacilities, getqid, getmap, and getdownoad is:
\
1) Use getfacilities to validate passed query parameters, obtain summary statistics and to obtain a queryid (QID). QIDs are time sensitive and will be valid for approximately 30 minutes.
2) Use get_qid, with the returned QID, to paginate through arrays of facility results.
3) Use get_map, with the returned QID, to zoom in/out and pan on the clustered and individual facility coordinates that meet the QID query criteria.
4) Use get_download, with the returned QID, to generate a Comma Separated Value (CSV) file of facility information that meets the QID query criteria.
\
\
Use the qcolumns parameter to customize your search results. Use the Metadata service endpoint for a list of available output objects, their Column Ids, and their definitions to help you build your customized output.
\
Additional ECHO Resources: Web Services, About ECHO's Data, Data Downloads
RCRA Rest Services provides multiple service endpoints, each with specific capabilities, to search and retrieve data on hazardous waste handlers/facilities regulated under the Resource Conservation and Recovery Act (RCRA). The returned results reflect data drawn from EPA's RCRAInfo database.
\
The getfacilities, getmap, getqid, and getdownload end points are meant to be used together, while the enhanced getfacilityinfo end point is self contained.
The getfacilityinfo end point returns either an array of state, county or zip clusters with summary statistics per cluster or an array of facilities.
\
The recommended use scenario for getfacilities, getqid, getmap, and getdownoad is:
\
1) Use getfacilities to validate passed query parameters, obtain summary statistics and to obtain a queryid (QID). QIDs are time sensitive and will be valid for approximately 30 minutes.
2) Use get_qid, with the returned QID, to paginate through arrays of facility results.
3) Use get_map, with the returned QID, to zoom in/out and pan on the clustered and individual facility coordinates that meet the QID query criteria.
4) Use get_download, with the returned QID, to generate a Comma Separated Value (CSV) file of facility information that meets the QID query criteria.
\
\
Use the qcolumns parameter to customize your search results. Use the Metadata service endpoint for a list of available output objects, their Column Ids, and their definitions to help you build your customized output.
\
Additional ECHO Resources: Web Services, About ECHO's Data, Data Downloads
Climate FieldView Platform APIs
climate.com
Last Modified: Thu Oct 29 12:30:46 PDT 2020
All endpoints are only accessible via HTTPS.
All API endpoints are located at https://platform.climate.com (e.g.
https://platform.climate.com/v4/fields).
The authorization token endpoint is located at
https://api.climate.com/api/oauth/token.
Troubleshooting
X-Http-Request-Id response header will be returned on every call,
successful or not. If you experience an issue with our api and need
to contact technical support, please supply the value of the X-Http-Request-Id
header along with an approximate time of when the request was made.
Request Limits
When you’re onboarded to Climate’s API platform, your x-api-key is assigned a custom usage plan. Usage plans are unique to each partner and have the following key attributes:
Throttling information
burstLimit: Maximum rate limit over a period ranging from 1 second to a few seconds
rateLimit: A steady-state rate limit
Quota information
Limit: The maximum number of requests that can be made in a given month
When the request rate threshold is exceeded, a 429 response code is returned. Optionally, the Retry-After header may be returned:
Following are examples of rate limit errors:
Rate limit exceeded:
HTTP/1.1 429
Content-Type: application/json
Content-Length: 32
{"message":"Too Many Requests"}
Quota exhausted:
HTTP/1.1 429
Content-Type: application/json
Content-Length: 29
{"message":"Limit Exceeded"}
Pagination
Pagination is performed via headers. Any request which returns a "results"
array may be paginated. The following figure shows how query results are laid out with
X-Limit=4 and no filter applied.
If there are no results, a response code of 304 will be returned.
If the response is the last set of results, a response code of 200 or
206 will be returned.
If there are more results, a response code of 206 will be returned.
If X-Next-Token is provided in the request headers but the token has
expired, a response code of 409 will be returned. This is only applicable
for some endpoints; see specific endpoint documentation below.
X-Limit
The page size can be controlled with the X-Limit header. Valid values are
1-100 and defaults to 100.
X-Next-Token
If the results are paginated, a response header of X-Next-Token will be
returned. Use the associated value in the subsequent request (via the X-Next-Token
request header) to retrieve the next page. The following sequence diagram shows how to
use X-Next-Token to fetch all the records.
Chunked Uploads
Uploads larger than 5MiB (5242880 bytes) must be done in 5MiB chunks
(with the exception of the final chunk). Each chunk request MUST contain a
Content-Range header specifying the portion of the upload, and a Content-Type
header specifying binary content type (application/octet-stream). Range
uploads must be contiguous. The maximum upload size is capped at 500MiB (524288000 bytes).
Chunked Downloads
Downloads larger than 5MiB (5242880 bytes) must be done in 1-5MiB
chunks (with the exception of the final chunk, which may be less than 1MiB).
Each chunk request MUST contain a Range header specifying the requested portion of the download,
and an Accept header specifying binary and json content types (application/octet-stream,application/json)
or all content types (/).
Drivers
If you need drivers to process agronomic data, download the ADAPT plugin below. We only support the plugin in the Windows environment, minimum is Windows 7 SP1.
For asPlanted, asHarvested and asApplied data:
ADAPT Plugin
Release notes can be found here.
Download and use of the ADAPT plugin means that you agree to the EULA for use of the ADAPT plugin.
Please review the EULA (last updated on June 6th, 2019) before download and use of the ADAPT plugin.
For more information, please refer to:
ADAPT Resources
ADAPT Overview
ADAPT FAQ
ADAPT Videos
Sample Test Data
Sample agronomic data:
asPlanted and asHarvested data
asApplied data set 1
asApplied data set 2
To upload the sample data to your account, please follow the instructions in this link.
Sample soil data:
Sample soil data
All endpoints are only accessible via HTTPS.
All API endpoints are located at https://platform.climate.com (e.g.
https://platform.climate.com/v4/fields).
The authorization token endpoint is located at
https://api.climate.com/api/oauth/token.
Troubleshooting
X-Http-Request-Id response header will be returned on every call,
successful or not. If you experience an issue with our api and need
to contact technical support, please supply the value of the X-Http-Request-Id
header along with an approximate time of when the request was made.
Request Limits
When you’re onboarded to Climate’s API platform, your x-api-key is assigned a custom usage plan. Usage plans are unique to each partner and have the following key attributes:
Throttling information
burstLimit: Maximum rate limit over a period ranging from 1 second to a few seconds
rateLimit: A steady-state rate limit
Quota information
Limit: The maximum number of requests that can be made in a given month
When the request rate threshold is exceeded, a 429 response code is returned. Optionally, the Retry-After header may be returned:
Following are examples of rate limit errors:
Rate limit exceeded:
HTTP/1.1 429
Content-Type: application/json
Content-Length: 32
{"message":"Too Many Requests"}
Quota exhausted:
HTTP/1.1 429
Content-Type: application/json
Content-Length: 29
{"message":"Limit Exceeded"}
Pagination
Pagination is performed via headers. Any request which returns a "results"
array may be paginated. The following figure shows how query results are laid out with
X-Limit=4 and no filter applied.
If there are no results, a response code of 304 will be returned.
If the response is the last set of results, a response code of 200 or
206 will be returned.
If there are more results, a response code of 206 will be returned.
If X-Next-Token is provided in the request headers but the token has
expired, a response code of 409 will be returned. This is only applicable
for some endpoints; see specific endpoint documentation below.
X-Limit
The page size can be controlled with the X-Limit header. Valid values are
1-100 and defaults to 100.
X-Next-Token
If the results are paginated, a response header of X-Next-Token will be
returned. Use the associated value in the subsequent request (via the X-Next-Token
request header) to retrieve the next page. The following sequence diagram shows how to
use X-Next-Token to fetch all the records.
Chunked Uploads
Uploads larger than 5MiB (5242880 bytes) must be done in 5MiB chunks
(with the exception of the final chunk). Each chunk request MUST contain a
Content-Range header specifying the portion of the upload, and a Content-Type
header specifying binary content type (application/octet-stream). Range
uploads must be contiguous. The maximum upload size is capped at 500MiB (524288000 bytes).
Chunked Downloads
Downloads larger than 5MiB (5242880 bytes) must be done in 1-5MiB
chunks (with the exception of the final chunk, which may be less than 1MiB).
Each chunk request MUST contain a Range header specifying the requested portion of the download,
and an Accept header specifying binary and json content types (application/octet-stream,application/json)
or all content types (/).
Drivers
If you need drivers to process agronomic data, download the ADAPT plugin below. We only support the plugin in the Windows environment, minimum is Windows 7 SP1.
For asPlanted, asHarvested and asApplied data:
ADAPT Plugin
Release notes can be found here.
Download and use of the ADAPT plugin means that you agree to the EULA for use of the ADAPT plugin.
Please review the EULA (last updated on June 6th, 2019) before download and use of the ADAPT plugin.
For more information, please refer to:
ADAPT Resources
ADAPT Overview
ADAPT FAQ
ADAPT Videos
Sample Test Data
Sample agronomic data:
asPlanted and asHarvested data
asApplied data set 1
asApplied data set 2
To upload the sample data to your account, please follow the instructions in this link.
Sample soil data:
Sample soil data
GlobalWineScore API Documentation
globalwinescore.com
The GlobalWineScore API is designed as a RESTful API, providing several resources and methods depending on your usage plan.
For further information please refer to our plans.
Authentication
The API uses token-based authentication.
In order to authenticate your requests, you need to include a specific header in each of your requests:
The word Token must be written. Your requests must also use the HTTPS protocol.
If you don't have a token yet, you need to apply for one here.
Your personal token can be found under the My account > API section of the GlobalWineScore website
Format
The API provides several rendering formats which you can control using the Accept header or format query parameter.
JSON (default): no header or Accept: application/json
XML: Accept: application/xml
Rate limiting
For API requests, the rate limit allows for up to 10 requests per minute.
Error handling
Whether a request succeeded is indicated by the HTTP status code. A 2xx status code indicates success, whereas a 4xx status code indicates failure.
When a request fails, the response body is still JSON, but always contains a detail field with a description of the error, which you can inspect for debugging.
For example, trying to access the API without proper authentication will return code 403 along with the message:
{"detail": "Authentication credentials were not provided."}
Found a bug ? send us an email at [email protected]
Ordering
At the moment, GlobalWineScores may be sorted by date and score. Use "-"
to sort in descending order.
Continuous synchronization
If you need to synchronize your database with our API, you can query our API using ?ordering=-date to get the newest scores first, which means you won't have to crawl the whole catalog every time :-)
Quick search interface
If you need to search our catalog (e.g. to align it with yours), we're providing you with a handy interface accessible here: https://api.globalwinescore.com/search/
You need to be logged in (email/password) to access this page, but other than that you can share it with anyone in your team and start searching right away !
Resources
The details about available endpoints can be found below.
You can click on each endpoint to find information about their parameters.
For further information please refer to our plans.
Authentication
The API uses token-based authentication.
In order to authenticate your requests, you need to include a specific header in each of your requests:
The word Token must be written. Your requests must also use the HTTPS protocol.
If you don't have a token yet, you need to apply for one here.
Your personal token can be found under the My account > API section of the GlobalWineScore website
Format
The API provides several rendering formats which you can control using the Accept header or format query parameter.
JSON (default): no header or Accept: application/json
XML: Accept: application/xml
Rate limiting
For API requests, the rate limit allows for up to 10 requests per minute.
Error handling
Whether a request succeeded is indicated by the HTTP status code. A 2xx status code indicates success, whereas a 4xx status code indicates failure.
When a request fails, the response body is still JSON, but always contains a detail field with a description of the error, which you can inspect for debugging.
For example, trying to access the API without proper authentication will return code 403 along with the message:
{"detail": "Authentication credentials were not provided."}
Found a bug ? send us an email at [email protected]
Ordering
At the moment, GlobalWineScores may be sorted by date and score. Use "-"
to sort in descending order.
Continuous synchronization
If you need to synchronize your database with our API, you can query our API using ?ordering=-date to get the newest scores first, which means you won't have to crawl the whole catalog every time :-)
Quick search interface
If you need to search our catalog (e.g. to align it with yours), we're providing you with a handy interface accessible here: https://api.globalwinescore.com/search/
You need to be logged in (email/password) to access this page, but other than that you can share it with anyone in your team and start searching right away !
Resources
The details about available endpoints can be found below.
You can click on each endpoint to find information about their parameters.
College Football Data API
collegefootballdata.com
This is an API for accessing all sorts of college football data. Please note that API keys should be supplied with "Bearer " prepended (e.g. "Bearer your_key"). API keys can be acquired from the CollegeFootballData.com website.
Board of Vocational Higher Secondary Examinations, Kerala
apisetu.gov.in
Board of Vocational Higher Secondary Examinations, Directorate of General Education, Government of Kerala has made available VHSE Marklist of MARCH 2020, which can be pulled by students into their Digilocker accounts
U.S. EPA Enforcement and Compliance History Online (ECHO) - Enforcement Case Search
epa.gov
Enforcement and Compliance History Online (ECHO) is a tool developed and maintained by EPA's Office of Enforcement and Compliance Assurance for public use. ECHO provides integrated compliance and enforcement information for over 1 million regulated facilities nationwide.
CASE Rest Services provide multiple service endpoints, each with specific capabilities, to search and retrieve data on civil cases entered into the
Integrated Compliance Information System (ICIS) and criminal cases entered into the Summary of Criminal Prosecutions database.
See Enforcement Case Search Help (https://echo.epa.gov/help/enforcement-case-search-help) for additional information on searching civil and criminal cases.
\
The getcases, getmap, getqid, and getdownload end points are meant to be used together, while the enhanced getcaseinfo end point is self contained..
The recommended use scenario for getcases, getqid, getmap, and getdownoad is:
\
1) Use getcases to validate passed query parameters, obtain summary statistics and to obtain a queryid (QID). QIDs are time sensitive and will be valid for approximately 30 minutes.
2) Use get_qid, with the returned QID, to paginate through arrays of case results.
3) Use get_map, with the returned QID, to zoom in/out and pan on the clustered and individual facility coordinates, related to the returned cases, that meet the QID query criteria.
4) Use get_download, with the returned QID, to generate a Comma Separated Value (CSV) file of facility information that meets the QID query criteria.
\
In addition to the service endpoints listed above there are two detailed case report services, one for civil cases (getcasereport) and one for criminal cases (getcrcasereport).
See the Civil Enforcement Case Report Help (https://echo.epa.gov/help/reports/enforcement-case-report-help) and the Criminal Case Report Help (https://echo.epa.gov/help/reports/criminal-case-report-help) for additional information
on then data returned from these two services.
\
Additional ECHO Resources: Web Services, About ECHO's Data, Data Downloads
CASE Rest Services provide multiple service endpoints, each with specific capabilities, to search and retrieve data on civil cases entered into the
Integrated Compliance Information System (ICIS) and criminal cases entered into the Summary of Criminal Prosecutions database.
See Enforcement Case Search Help (https://echo.epa.gov/help/enforcement-case-search-help) for additional information on searching civil and criminal cases.
\
The getcases, getmap, getqid, and getdownload end points are meant to be used together, while the enhanced getcaseinfo end point is self contained..
The recommended use scenario for getcases, getqid, getmap, and getdownoad is:
\
1) Use getcases to validate passed query parameters, obtain summary statistics and to obtain a queryid (QID). QIDs are time sensitive and will be valid for approximately 30 minutes.
2) Use get_qid, with the returned QID, to paginate through arrays of case results.
3) Use get_map, with the returned QID, to zoom in/out and pan on the clustered and individual facility coordinates, related to the returned cases, that meet the QID query criteria.
4) Use get_download, with the returned QID, to generate a Comma Separated Value (CSV) file of facility information that meets the QID query criteria.
\
In addition to the service endpoints listed above there are two detailed case report services, one for civil cases (getcasereport) and one for criminal cases (getcrcasereport).
See the Civil Enforcement Case Report Help (https://echo.epa.gov/help/reports/enforcement-case-report-help) and the Criminal Case Report Help (https://echo.epa.gov/help/reports/criminal-case-report-help) for additional information
on then data returned from these two services.
\
Additional ECHO Resources: Web Services, About ECHO's Data, Data Downloads
DriveBC's Open511 API
This API is DriveBC's implementation of the Open511 specification. It provides information about known road events (traffic accidents, construction, etc.) in British Columbia, Canada. Please note that you may experience issues when submitting requests to the delivery or test environment if using this OpenAPI specification in other API console viewers.
OMDb
The Open Movie Database. The OMDb API is a free web service to obtain movie information, all content and images on the site are contributed and maintained by our users.
Mtaa API Documentation
Mtaa A simple REST API to access Tanzania's location information,With mtaa API you can easily query and integrate all the location in tanzania from region level to streets from your programming language of your your choice
Auckland Museum API
This is technical documentation for the Auckland Museum API