Mock sample for your project: City of Surrey Open511 API
Integrate with "City of Surrey Open511 API" from surrey.ca in no time with Mockoon's ready to use mock sample
City of Surrey Open511 API
Version: 0.1
Start working with "City of Surrey Open511 API" right away by using this ready-to-use mock sample. API mocking can greatly speed up your application development by removing all the tedious tasks or issues: API key provisioning, account creation, unplanned downtime, etc.
It also helps reduce your dependency on third-party APIs and improves your integration tests' quality and reliability by accounting for random failures, slow response time, etc.
Description
This API provides real time traffic obstruction events occuring within the City of Surrey.
Other APIs by surrey.ca
City of Surrey Traffic Loop Count API.
This API provides locations of City of Surrey traffic loops and the corresponding traffic loop counts in 15 minute intervals. While the counts are broken up by 15 minute intervals, the data is currently loaded only once per day. We are hoping to increase this frequency to at least once every hour. The LOOP_ID field is common to both datasets and can be used to cross-reference them.
Other APIs in the same category
Transport Department, Andhra Pradesh
apisetu.gov.in
Driving License (DL) and Vehicle Registration Certificate (RC) of the State, as available on Parivahan Sewa (http://parivahan.co.in/) of Ministry of Road Transport and Highways, are available on DigiLocker. Citizens can pull these documents into their DigiLocker accounts.
Medcorder Nearby Doctor API
medcorder.com
Returns doctors near a client given a lat/lon and autocomplete text.
U.S. EPA Enforcement and Compliance History Online (ECHO) - Clean Water Act (CWA) Rest Services
Enforcement and Compliance History Online (ECHO) is a tool developed and maintained by EPA's Office of Enforcement and Compliance Assurance for public use. ECHO provides integrated compliance and enforcement information for over 1 million regulated facilities nationwide.
CWA Rest Services provides multiple service endpoints, each with specific capabilities, to search and retrieve data on facilities regulated under the Clean Water Act (CWA) and managed under the National Pollutant Discharge Elimination System (NPDES) program. The returned results reflect data drawn from EPA's ICIS-NPDES database.
\
The getfacilities, getmap, getqid, and getdownload end points are meant to be used together, while the enhanced getfacilityinfo end point is self contained.
The getfacilityinfo end point returns either an array of state, county or zip clusters with summary statistics per cluster or an array of facilities.
\
The recommended use scenario for getfacilities, getqid, getmap, and getdownoad is:
\
1) Use getfacilities to validate passed query parameters, obtain summary statistics and to obtain a queryid (QID). QIDs are time sensitive and will be valid for approximately 30 minutes.
2) Use get_qid, with the returned QID, to paginate through arrays of facility results.
3) Use get_map, with the returned QID, to zoom in/out and pan on the clustered and individual facility coordinates that meet the QID query criteria.
4) Use get_download, with the returned QID, to generate a Comma Separated Value (CSV) file of facility information that meets the QID query criteria.
\
\
Use the qcolumns parameter to customize your search results. Use the Metadata service endpoint for a list of available output objects, their Column Ids, and their definitions to help you build your customized output.
\
Additional ECHO Resources: Web Services, About ECHO's Data, Data Downloads
CWA Rest Services provides multiple service endpoints, each with specific capabilities, to search and retrieve data on facilities regulated under the Clean Water Act (CWA) and managed under the National Pollutant Discharge Elimination System (NPDES) program. The returned results reflect data drawn from EPA's ICIS-NPDES database.
\
The getfacilities, getmap, getqid, and getdownload end points are meant to be used together, while the enhanced getfacilityinfo end point is self contained.
The getfacilityinfo end point returns either an array of state, county or zip clusters with summary statistics per cluster or an array of facilities.
\
The recommended use scenario for getfacilities, getqid, getmap, and getdownoad is:
\
1) Use getfacilities to validate passed query parameters, obtain summary statistics and to obtain a queryid (QID). QIDs are time sensitive and will be valid for approximately 30 minutes.
2) Use get_qid, with the returned QID, to paginate through arrays of facility results.
3) Use get_map, with the returned QID, to zoom in/out and pan on the clustered and individual facility coordinates that meet the QID query criteria.
4) Use get_download, with the returned QID, to generate a Comma Separated Value (CSV) file of facility information that meets the QID query criteria.
\
\
Use the qcolumns parameter to customize your search results. Use the Metadata service endpoint for a list of available output objects, their Column Ids, and their definitions to help you build your customized output.
\
Additional ECHO Resources: Web Services, About ECHO's Data, Data Downloads
Auckland Museum API
This is technical documentation for the Auckland Museum API
Transport Department, Lakshadweep
apisetu.gov.in
Driving License (DL) and Vehicle Registration Certificate (RC) of the State, as available on Parivahan Sewa (http://parivahan.co.in/) of Ministry of Road Transport and Highways, are available on DigiLocker. Citizens can pull these documents into their DigiLocker accounts.
Transport Department, Jammu & Kashmir
apisetu.gov.in
Driving License (DL) and Vehicle Registration Certificate (RC) of the State, as available on Parivahan Sewa (http://parivahan.co.in/) of Ministry of Road Transport and Highways, are available on DigiLocker. Citizens can pull these documents into their DigiLocker accounts.
Motor Vehicle Department, Nagaland
apisetu.gov.in
Driving License (DL) and Vehicle Registration Certificate (RC) of the State, as available on Parivahan Sewa (http://parivahan.co.in/) of Ministry of Road Transport and Highways, are available on DigiLocker. Citizens can pull these documents into their DigiLocker accounts.
Board of Vocational Higher Secondary Examinations, Kerala
apisetu.gov.in
Board of Vocational Higher Secondary Examinations, Directorate of General Education, Government of Kerala has made available VHSE Marklist of MARCH 2020, which can be pulled by students into their Digilocker accounts
State Transport Department, Telangana
apisetu.gov.in
Driving License (DL) and Vehicle Registration Certificate (RC) of the State, as available on Parivahan Sewa (http://parivahan.co.in/) of Ministry of Road Transport and Highways, are available on DigiLocker. Citizens can pull these documents into their DigiLocker accounts.
TheTVDB API v3
thetvdb.com
API v3 targets v2 functionality with a few minor additions. The API is accessible via https://api.thetvdb.com and provides the following REST endpoints in JSON format.
How to use this API documentation
You may browse the API routes without authentication, but if you wish to send requests to the API and see response data, then you must authenticate.
Obtain a JWT token by POSTing to the /login route in the Authentication section with your API key and credentials.
Paste the JWT token from the response into the "JWT Token" field at the top of the page and click the 'Add Token' button.
You will now be able to use the remaining routes to send requests to the API and get a response.
Language Selection
Language selection is done via the Accept-Language header. At the moment, you may only pass one language abbreviation in the header at a time. Valid language abbreviations can be found at the /languages route..
Authentication
Authentication to use the API is similar to the How-to section above. Users must POST to the /login route with their API key and credentials in the following format in order to obtain a JWT token.
{"apikey":"APIKEY","username":"USERNAME","userkey":"USERKEY"}
Note that the username and key are ONLY required for the /user routes. The user's key is labled Account Identifier in the account section of the main site.
The token is then used in all subsequent requests by providing it in the Authorization header. The header will look like: Authorization: Bearer . Currently, the token expires after 24 hours. You can GET the /refresh_token route to extend that expiration date.
Versioning
You may request a different version of the API by including an Accept header in your request with the following format: Accept:application/vnd.thetvdb.v$VERSION. This documentation automatically uses the version seen at the top and bottom of the page.
How to use this API documentation
You may browse the API routes without authentication, but if you wish to send requests to the API and see response data, then you must authenticate.
Obtain a JWT token by POSTing to the /login route in the Authentication section with your API key and credentials.
Paste the JWT token from the response into the "JWT Token" field at the top of the page and click the 'Add Token' button.
You will now be able to use the remaining routes to send requests to the API and get a response.
Language Selection
Language selection is done via the Accept-Language header. At the moment, you may only pass one language abbreviation in the header at a time. Valid language abbreviations can be found at the /languages route..
Authentication
Authentication to use the API is similar to the How-to section above. Users must POST to the /login route with their API key and credentials in the following format in order to obtain a JWT token.
{"apikey":"APIKEY","username":"USERNAME","userkey":"USERKEY"}
Note that the username and key are ONLY required for the /user routes. The user's key is labled Account Identifier in the account section of the main site.
The token is then used in all subsequent requests by providing it in the Authorization header. The header will look like: Authorization: Bearer . Currently, the token expires after 24 hours. You can GET the /refresh_token route to extend that expiration date.
Versioning
You may request a different version of the API by including an Accept header in your request with the following format: Accept:application/vnd.thetvdb.v$VERSION. This documentation automatically uses the version seen at the top and bottom of the page.
BC Laws
BC Laws is an electronic library providing free public access to the laws of British Columbia. BC Laws is hosted by the Queen's Printer of British Columbia and published in partnership with the Ministry of Justice and the Law Clerk of the Legislative Assembly.BC Laws contains a comprehensive collection of BC legislation and related materials. It is available on the internet in two forms:First: The library is available as a web site in which users can browse and search the laws of British Columbia.Second: The library is available as a portal to legislation in raw XML data format, accessible via the BC Laws API2. This direct access to raw data is intended to enable third parties to build or add their own custom applications based on the structure of the data and all the associated search functionality inherent in that structure. The BC Laws website itself is an example of one such application.
Please note that you may experience issues when submitting requests to the delivery or test environment if using this OpenAPI specification in other API console viewers.
Please note that you may experience issues when submitting requests to the delivery or test environment if using this OpenAPI specification in other API console viewers.