Mock sample for your project: APIs.guru
Integrate with "APIs.guru" from apis.guru in no time with Mockoon's ready to use mock sample
APIs.guru
Version: 2.0.2
Speed up your application development by using "APIs.guru" ready-to-use mock sample. Mocking this API will help you accelerate your development lifecycles and allow you to stop relying on an external API to get the job done. No more API keys to provision, accesses to configure or unplanned downtime, just work.
Enhance your development infrastructure by mocking third party APIs during integrating testing.
Description
Wikipedia for Web APIs. Repository of API specs in OpenAPI 3.0 format.
Warning: If you want to be notified about changes in advance please join our Slack channel.
Client sample: [Demo] [Repo]
Other APIs in the same category
United India Insurance Company Limited
apisetu.gov.in
United India Insurance Co. Ltd. is a Public Sector General Insurance Company incorporated in 1938, having its presence all over India providing risk cover to 1.74 Crore policyholders. General Insurance Policies such as Motor, Health, Personal Accident, Travel, e.t.c issued by United India Insurance Co. Ltd. (https://uiic.co.in/) are available to be downloaded by citizens of India to their DigiLocker account.
Motor Vehicle Department, Maharashtra
apisetu.gov.in
Driving License (DL) and Vehicle Registration Certificate (RC) of the State, as available on Parivahan Sewa (http://parivahan.co.in/) of Ministry of Road Transport and Highways, are available on DigiLocker. Citizens can pull these documents into their DigiLocker accounts.
Transport Department, Puducherry
apisetu.gov.in
Driving License (DL) and Vehicle Registration Certificate (RC) of the State, as available on Parivahan Sewa (http://parivahan.co.in/) of Ministry of Road Transport and Highways, are available on DigiLocker. Citizens can pull these documents into their DigiLocker accounts.
Fahrplan-Free
A RESTful webservice to request a railway journey - FREE plan with restricted access (max. 10 requests per minute). Please ignore the message in the API Console about the access token.
Register to use an less restricted version, which requires an access token.
Register to use an less restricted version, which requires an access token.
U.S. EPA Enforcement and Compliance History Online (ECHO) - Safe Drinking Water Act
Enforcement and Compliance History Online (ECHO) is a tool developed and maintained by EPA's Office of Enforcement and Compliance Assurance for public use. ECHO provides integrated compliance and enforcement information for over 1 million regulated facilities nationwide.
SDW Rest Services provides multiple service endpoints, each with specific capabilities, to search and retrieve data on public water systems regulated under the Safe Drinking Water Act (SDWA). The returned results reflect data drawn from EPA's Federal Safe Drinking Water Information System (SDWIS) database.
\
The getsystems, getqid, and get_download end points are meant to be used together.
\
The recommended use scenario for getsystems, getqid, and get_downoad is:
\
1) Use getsystems to validate passed query parameters, obtain summary statistics and to obtain a queryid (QID). QIDs are time sensitive and will be valid for approximately 30 minutes.
2) Use get_qid, with the returned QID, to paginate through arrays of water system results.
3) Use get_download, with the returned QID, to generate a Comma Separated Value (CSV) file of water system information that meets the QID query criteria.
\
\
Use the qcolumns parameter to customize your search results. Use the Metadata service endpoint for a list of available output objects, their Column Ids, and their definitions to help you build your customized output.
\
Additional ECHO Resources: Web Services, About ECHO's Data, Data Downloads
SDW Rest Services provides multiple service endpoints, each with specific capabilities, to search and retrieve data on public water systems regulated under the Safe Drinking Water Act (SDWA). The returned results reflect data drawn from EPA's Federal Safe Drinking Water Information System (SDWIS) database.
\
The getsystems, getqid, and get_download end points are meant to be used together.
\
The recommended use scenario for getsystems, getqid, and get_downoad is:
\
1) Use getsystems to validate passed query parameters, obtain summary statistics and to obtain a queryid (QID). QIDs are time sensitive and will be valid for approximately 30 minutes.
2) Use get_qid, with the returned QID, to paginate through arrays of water system results.
3) Use get_download, with the returned QID, to generate a Comma Separated Value (CSV) file of water system information that meets the QID query criteria.
\
\
Use the qcolumns parameter to customize your search results. Use the Metadata service endpoint for a list of available output objects, their Column Ids, and their definitions to help you build your customized output.
\
Additional ECHO Resources: Web Services, About ECHO's Data, Data Downloads
Top Stories
The Top Stories API provides lists of articles and associated images by section.
U.S. EPA Enforcement and Compliance History Online (ECHO) - Clean Water Act (CWA) Rest Services
Enforcement and Compliance History Online (ECHO) is a tool developed and maintained by EPA's Office of Enforcement and Compliance Assurance for public use. ECHO provides integrated compliance and enforcement information for over 1 million regulated facilities nationwide.
CWA Rest Services provides multiple service endpoints, each with specific capabilities, to search and retrieve data on facilities regulated under the Clean Water Act (CWA) and managed under the National Pollutant Discharge Elimination System (NPDES) program. The returned results reflect data drawn from EPA's ICIS-NPDES database.
\
The getfacilities, getmap, getqid, and getdownload end points are meant to be used together, while the enhanced getfacilityinfo end point is self contained.
The getfacilityinfo end point returns either an array of state, county or zip clusters with summary statistics per cluster or an array of facilities.
\
The recommended use scenario for getfacilities, getqid, getmap, and getdownoad is:
\
1) Use getfacilities to validate passed query parameters, obtain summary statistics and to obtain a queryid (QID). QIDs are time sensitive and will be valid for approximately 30 minutes.
2) Use get_qid, with the returned QID, to paginate through arrays of facility results.
3) Use get_map, with the returned QID, to zoom in/out and pan on the clustered and individual facility coordinates that meet the QID query criteria.
4) Use get_download, with the returned QID, to generate a Comma Separated Value (CSV) file of facility information that meets the QID query criteria.
\
\
Use the qcolumns parameter to customize your search results. Use the Metadata service endpoint for a list of available output objects, their Column Ids, and their definitions to help you build your customized output.
\
Additional ECHO Resources: Web Services, About ECHO's Data, Data Downloads
CWA Rest Services provides multiple service endpoints, each with specific capabilities, to search and retrieve data on facilities regulated under the Clean Water Act (CWA) and managed under the National Pollutant Discharge Elimination System (NPDES) program. The returned results reflect data drawn from EPA's ICIS-NPDES database.
\
The getfacilities, getmap, getqid, and getdownload end points are meant to be used together, while the enhanced getfacilityinfo end point is self contained.
The getfacilityinfo end point returns either an array of state, county or zip clusters with summary statistics per cluster or an array of facilities.
\
The recommended use scenario for getfacilities, getqid, getmap, and getdownoad is:
\
1) Use getfacilities to validate passed query parameters, obtain summary statistics and to obtain a queryid (QID). QIDs are time sensitive and will be valid for approximately 30 minutes.
2) Use get_qid, with the returned QID, to paginate through arrays of facility results.
3) Use get_map, with the returned QID, to zoom in/out and pan on the clustered and individual facility coordinates that meet the QID query criteria.
4) Use get_download, with the returned QID, to generate a Comma Separated Value (CSV) file of facility information that meets the QID query criteria.
\
\
Use the qcolumns parameter to customize your search results. Use the Metadata service endpoint for a list of available output objects, their Column Ids, and their definitions to help you build your customized output.
\
Additional ECHO Resources: Web Services, About ECHO's Data, Data Downloads
FRC Events
firstinspires.org
Overview
FIRST /FMS FRC Events API is a service to return relevant information about the FIRST Robotics Competition (FRC). Information is made available from events operating around the world.
For FRC, information is made available by the Field Management System (FMS) server operating at each event site. The FMS will attempt to sync all data from the event to "the cloud" as long as internet is available at the venue. If internet is unavailable, or "goes down" during the event, the FMS will automatically sync all data from the time the system was offline as soon as the connection is restored. The API will provide data as soon as it has synced, and we do not add any artificial delays. If you are receiving "stale" data, it may be because of connectivity problems at the venue. We recommend you try again later, and post on the FIRST FMS TeamForge site if the problem persists. (Note: FMS does not sync while a match is running, so data that has to do with a particular match should become available once the score has been revealed to the audience at the event.)
Migration and Program Notes:
Pay close attention to the addresses for calling the various endpoints- as well as the notes regarding endpoints with multiple possible responses (i.e. score details and rankings).
Documentation Notes
All times are listed in the local time to the event venue. HTTP-date values will show their timezone.
If you specify a parameter, but no value for that parameter, it will be ignored. For example, if you request URL?teamNumber= the teamNumber parameter would be ignored.
We will continue to support the current version of the API plus one version older. Old APIs are depricated once a version "two times newer" is available, at minimum 6 months. For example, version 2.0 and 1.0 are supported right now, but 1.0 will not be supported once 2.1 (or 3.0) is available. Versions may also be retired earlier with prior notice here in the documentation.
The full host address of the API is needed in all calls. The version number is required in each call in order to ensure your requests are made (and responses are returned) in the formats you anticipate. The version number for this documentation is found on the top of the page, in the title. If you call this version number, the API responses will match the formats listed below.
All of the APIs are capable of accepting the Accept HTTP header with either application/xml or application/json based on the desired return type. Any API call that results in an HTTP Status Code other than 200 (OK) will only be shown here as an application/json response to save space, but the content is the same regardless of the request type. All response will have a Content-Length and Date response header, but those are not shown in the documentaiton.
For all APIs that accept a query string in addition to the URI base, the order of parameters do not matter, but the name shown in the documentation must match exactly, as does the associated value format as described in details.
For response codes that are not HTTP 200 (OK), the documentation will show a body message that represents a possible response value. While the "title" of the HTTP Status Code will match those shown in the response codes documentation section exactly, the body of the response will be a more detailed explanation of why that status code is being returned and may not always be exactly as shown in the examples.
None of the APIs will show possible return here in the documentation of HTTP 401 (Unauthorized), but that code applies to all APIs as a possible response if the request is made without a valid token.
Last-Modified, FMS-OnlyModifiedSince, and If-Modified-Since Headers
The FRC Events API utilizes the Last-Modified and If-Modified-Since Headers to communicate with consumers regarding the age of the data they are requesting. With a couple of exceptions, all calls will return a Last-Modified Header set with the time at which the data at that endpoint was last modified. The Header will always be set in the HTTP-date format, as described in the HTTP Protocol. There are two exceptions: the Last-Modified Header is not set if the endpoint returns no results (such as a request for a schedule with no matches) and will also not be set if the request was an HTTP DELETE.
Consumers should keep track of the Last-Modified Header, and return it on subsequent calls to the same endpoint as the If-Modified-Since. The server will recognize this request, and will only return a result if the data has been modified since the last request. If no changes have been made, an HTTP 304 will be returned. If data has been modified, ALL data on that call will be returned (for "only modified" data, see below).
The FRC Events API also allows a custom header used to filter the return data to a specific subset. This is done by specifying a FMS-OnlyModifiedSince header with each call. As with the If-Modified-Since header, consumers should keep track of the Last-Modified Header, and return it on subsequent calls to the same endpoint as the FMS-OnlyModifiedSince Header. The server will recognize this request, and will only return a result if the data has been modified since the last request, and, if returned, the data will only be those portions modified since the included date. If no changes, have been made, an HTTP 304 will be returned. Using this method, the server and consumer save processing time by only receiving modified data that is in need of update on the consumer side.
If the Headers are improperly passed (such as the wrong Day of Week for the matching date, or a date in the future), the endpoint will simply ignore the Header and return all results. If both headers are specified, the request will be denied.
Response Codes
The FRC Events API HTTP Status Codes correspond with the common codes, but occasionally with different "titles". The "title" used by the API is shown next to each of the below possible response HTTP Status Codes. Throughout the documentation, Apiary may automatically show the common "title" in example returns (like "Not Found" for 404) but on the production server, the "title" will instead match those listed below.
HTTP 200 - "OK"
The request has succeeded. An entity corresponding to the requested resource is sent in the response. This will be returned as the HTTP Status Code for all request that succeed, even if the body is empty (such as an event that has no rankings, but with a valid season and event code were used)
HTTP 304 - "Not Modified"
When utilizing a Header that allows filtered data returns, such as If-Modified-Since, this response indicates that no data meets the request.
HTTP 400 - "Invalid Season Requested"/"Malformed Parameter Format In Request"/"Missing Parameter In Request"/"Invalid API Version Requested":
The request could not be understood by the server due to malformed syntax. The client SHOULD NOT repeat the request without modifications. Specifically for this API, a 400 response indicates that the requested URI matches with a valid API, but one or more required parameter was malformed or invalid. Examples include an event code that is too short or team number that contains a letter.
HTTP 401 - "Unauthorized"
All requests against the API require authentication via a valid user token. Failing to provide one, or providing an invalid one, will warrant a 401 response. The client MAY repeat the request with a suitable Authorization header field.
HTTP 404 - "Invalid Event Requested"
Even though the 404 code usually indicates any not found status, a 404 will only be issued in this API when an event cannot be found for the requested season and event code. If the request didn't match a valid API or there were malformed parameters, the response would not receive a 404 but rather a 400 or 501. If this HTTP code is received, the season was a valid season and the event code matched the acceptable style of an event code, but there were no records of an event matching the combination of that season and event code. For example, HTTP 404 would be issued when the event had a different code in the requested season (the codes can change year to year based on event location).
HTTP 500 - "Internal Server Error"
The server encountered an unexpected condition which prevented it from fulfilling the request. This is a code sent directly by the server, and has no special alternate definition specific to this API.
HTTP 501 - "Request Did Not Match Any Current API Pattern"
The server does not support the functionality required to fulfill the request. Specifically, the request pattern did not match any of the possible APIs, and thus processing was discontinued. This code is also issued when too many optional parameters were included in a single request and fulfilling it would make the result confusing or misleading. Each API will specify which parameters or combination of parameters can be used at the same time.
HTTP 503 - "Service Unavailable"
The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay MAY be indicated in a Retry-After header. This code will not always appear, sometimes the server may outright refuse the connection instead. This is a code sent directly by the server, and has no special alternate definition specific to this API.
See the notes at the top of this documentation for important information about HTTP Status Codes.
Authorization
In order to make calls against the FRC Events API, you must include an HTTP Header called Authorization with the value set as specified below. If a request is made without this header, processing stops and an HTTP 401 is issued. All Authorization headers follow the same format:
Authorization: Basic 000000000000000000000000000000000000000000000000000000000000
Where the Zeros are replaced by your Token. The Token can be formed by taking your username and your AuthorizationKey and adding a colon. For example, if your username is sampleuser and your AuthorizationKey is 7eaa6338-a097-4221-ac04-b6120fcc4d49 you would have this string:
sampleuser:7eaa6338-a097-4221-ac04-b6120fcc4d49
This string must then be encoded using Base64 Encoded to form the Token, which will be the same length as the example above, but include letters and numbers. For our example, we would have:
c2FtcGxldXNlcjo3ZWFhNjMzOC1hMDk3LTQyMjEtYWMwNC1iNjEyMGZjYzRkNDk=
NOTICE : Publicly distributing an application, code snippet, etc, that has your username and token in it, encoded or not, WILL result in your token being blocked from the API. Each user should apply for their own token.
If you wish to acquire a token for your development, you may do so by requesting a token through our automated system on this website.
AUTOMATED REMOVAL : If you do not activate your account within 72 hours of making your request for a token, or if you do not make at least one API request every twelve (12) months, your account/token will be marked as disabled for inactivity and subject to being deleted. (This policy does not apply to accounts with special operating agreements with FIRST)
HTTP401 and Authorization
Each Token can be individually enabled and disabled by FIRST. As such, a normally valid combination of username and AuthorizationToken could still be rejected. The possible return messages you may see in these instances are:
Incorrect Token (You supplied an AuthorizationToken, but it wasn't correct)
Account Disabled, Contact Support (You have been disabled for excessive traffic or abuse. Contact support)
Username Not Found (A username was found, but didn't match any on file)
Unable To Determine Authorization Token (The format of the Authorization header was incorrect)
FIRST /FMS FRC Events API is a service to return relevant information about the FIRST Robotics Competition (FRC). Information is made available from events operating around the world.
For FRC, information is made available by the Field Management System (FMS) server operating at each event site. The FMS will attempt to sync all data from the event to "the cloud" as long as internet is available at the venue. If internet is unavailable, or "goes down" during the event, the FMS will automatically sync all data from the time the system was offline as soon as the connection is restored. The API will provide data as soon as it has synced, and we do not add any artificial delays. If you are receiving "stale" data, it may be because of connectivity problems at the venue. We recommend you try again later, and post on the FIRST FMS TeamForge site if the problem persists. (Note: FMS does not sync while a match is running, so data that has to do with a particular match should become available once the score has been revealed to the audience at the event.)
Migration and Program Notes:
Pay close attention to the addresses for calling the various endpoints- as well as the notes regarding endpoints with multiple possible responses (i.e. score details and rankings).
Documentation Notes
All times are listed in the local time to the event venue. HTTP-date values will show their timezone.
If you specify a parameter, but no value for that parameter, it will be ignored. For example, if you request URL?teamNumber= the teamNumber parameter would be ignored.
We will continue to support the current version of the API plus one version older. Old APIs are depricated once a version "two times newer" is available, at minimum 6 months. For example, version 2.0 and 1.0 are supported right now, but 1.0 will not be supported once 2.1 (or 3.0) is available. Versions may also be retired earlier with prior notice here in the documentation.
The full host address of the API is needed in all calls. The version number is required in each call in order to ensure your requests are made (and responses are returned) in the formats you anticipate. The version number for this documentation is found on the top of the page, in the title. If you call this version number, the API responses will match the formats listed below.
All of the APIs are capable of accepting the Accept HTTP header with either application/xml or application/json based on the desired return type. Any API call that results in an HTTP Status Code other than 200 (OK) will only be shown here as an application/json response to save space, but the content is the same regardless of the request type. All response will have a Content-Length and Date response header, but those are not shown in the documentaiton.
For all APIs that accept a query string in addition to the URI base, the order of parameters do not matter, but the name shown in the documentation must match exactly, as does the associated value format as described in details.
For response codes that are not HTTP 200 (OK), the documentation will show a body message that represents a possible response value. While the "title" of the HTTP Status Code will match those shown in the response codes documentation section exactly, the body of the response will be a more detailed explanation of why that status code is being returned and may not always be exactly as shown in the examples.
None of the APIs will show possible return here in the documentation of HTTP 401 (Unauthorized), but that code applies to all APIs as a possible response if the request is made without a valid token.
Last-Modified, FMS-OnlyModifiedSince, and If-Modified-Since Headers
The FRC Events API utilizes the Last-Modified and If-Modified-Since Headers to communicate with consumers regarding the age of the data they are requesting. With a couple of exceptions, all calls will return a Last-Modified Header set with the time at which the data at that endpoint was last modified. The Header will always be set in the HTTP-date format, as described in the HTTP Protocol. There are two exceptions: the Last-Modified Header is not set if the endpoint returns no results (such as a request for a schedule with no matches) and will also not be set if the request was an HTTP DELETE.
Consumers should keep track of the Last-Modified Header, and return it on subsequent calls to the same endpoint as the If-Modified-Since. The server will recognize this request, and will only return a result if the data has been modified since the last request. If no changes have been made, an HTTP 304 will be returned. If data has been modified, ALL data on that call will be returned (for "only modified" data, see below).
The FRC Events API also allows a custom header used to filter the return data to a specific subset. This is done by specifying a FMS-OnlyModifiedSince header with each call. As with the If-Modified-Since header, consumers should keep track of the Last-Modified Header, and return it on subsequent calls to the same endpoint as the FMS-OnlyModifiedSince Header. The server will recognize this request, and will only return a result if the data has been modified since the last request, and, if returned, the data will only be those portions modified since the included date. If no changes, have been made, an HTTP 304 will be returned. Using this method, the server and consumer save processing time by only receiving modified data that is in need of update on the consumer side.
If the Headers are improperly passed (such as the wrong Day of Week for the matching date, or a date in the future), the endpoint will simply ignore the Header and return all results. If both headers are specified, the request will be denied.
Response Codes
The FRC Events API HTTP Status Codes correspond with the common codes, but occasionally with different "titles". The "title" used by the API is shown next to each of the below possible response HTTP Status Codes. Throughout the documentation, Apiary may automatically show the common "title" in example returns (like "Not Found" for 404) but on the production server, the "title" will instead match those listed below.
HTTP 200 - "OK"
The request has succeeded. An entity corresponding to the requested resource is sent in the response. This will be returned as the HTTP Status Code for all request that succeed, even if the body is empty (such as an event that has no rankings, but with a valid season and event code were used)
HTTP 304 - "Not Modified"
When utilizing a Header that allows filtered data returns, such as If-Modified-Since, this response indicates that no data meets the request.
HTTP 400 - "Invalid Season Requested"/"Malformed Parameter Format In Request"/"Missing Parameter In Request"/"Invalid API Version Requested":
The request could not be understood by the server due to malformed syntax. The client SHOULD NOT repeat the request without modifications. Specifically for this API, a 400 response indicates that the requested URI matches with a valid API, but one or more required parameter was malformed or invalid. Examples include an event code that is too short or team number that contains a letter.
HTTP 401 - "Unauthorized"
All requests against the API require authentication via a valid user token. Failing to provide one, or providing an invalid one, will warrant a 401 response. The client MAY repeat the request with a suitable Authorization header field.
HTTP 404 - "Invalid Event Requested"
Even though the 404 code usually indicates any not found status, a 404 will only be issued in this API when an event cannot be found for the requested season and event code. If the request didn't match a valid API or there were malformed parameters, the response would not receive a 404 but rather a 400 or 501. If this HTTP code is received, the season was a valid season and the event code matched the acceptable style of an event code, but there were no records of an event matching the combination of that season and event code. For example, HTTP 404 would be issued when the event had a different code in the requested season (the codes can change year to year based on event location).
HTTP 500 - "Internal Server Error"
The server encountered an unexpected condition which prevented it from fulfilling the request. This is a code sent directly by the server, and has no special alternate definition specific to this API.
HTTP 501 - "Request Did Not Match Any Current API Pattern"
The server does not support the functionality required to fulfill the request. Specifically, the request pattern did not match any of the possible APIs, and thus processing was discontinued. This code is also issued when too many optional parameters were included in a single request and fulfilling it would make the result confusing or misleading. Each API will specify which parameters or combination of parameters can be used at the same time.
HTTP 503 - "Service Unavailable"
The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay MAY be indicated in a Retry-After header. This code will not always appear, sometimes the server may outright refuse the connection instead. This is a code sent directly by the server, and has no special alternate definition specific to this API.
See the notes at the top of this documentation for important information about HTTP Status Codes.
Authorization
In order to make calls against the FRC Events API, you must include an HTTP Header called Authorization with the value set as specified below. If a request is made without this header, processing stops and an HTTP 401 is issued. All Authorization headers follow the same format:
Authorization: Basic 000000000000000000000000000000000000000000000000000000000000
Where the Zeros are replaced by your Token. The Token can be formed by taking your username and your AuthorizationKey and adding a colon. For example, if your username is sampleuser and your AuthorizationKey is 7eaa6338-a097-4221-ac04-b6120fcc4d49 you would have this string:
sampleuser:7eaa6338-a097-4221-ac04-b6120fcc4d49
This string must then be encoded using Base64 Encoded to form the Token, which will be the same length as the example above, but include letters and numbers. For our example, we would have:
c2FtcGxldXNlcjo3ZWFhNjMzOC1hMDk3LTQyMjEtYWMwNC1iNjEyMGZjYzRkNDk=
NOTICE : Publicly distributing an application, code snippet, etc, that has your username and token in it, encoded or not, WILL result in your token being blocked from the API. Each user should apply for their own token.
If you wish to acquire a token for your development, you may do so by requesting a token through our automated system on this website.
AUTOMATED REMOVAL : If you do not activate your account within 72 hours of making your request for a token, or if you do not make at least one API request every twelve (12) months, your account/token will be marked as disabled for inactivity and subject to being deleted. (This policy does not apply to accounts with special operating agreements with FIRST)
HTTP401 and Authorization
Each Token can be individually enabled and disabled by FIRST. As such, a normally valid combination of username and AuthorizationToken could still be rejected. The possible return messages you may see in these instances are:
Incorrect Token (You supplied an AuthorizationToken, but it wasn't correct)
Account Disabled, Contact Support (You have been disabled for excessive traffic or abuse. Contact support)
Username Not Found (A username was found, but didn't match any on file)
Unable To Determine Authorization Token (The format of the Authorization header was incorrect)
HP Swasthya Bima Yojna Society, Himachal Pradesh
apisetu.gov.in
Himachal Pradesh Swasthya Bima Yojna Society (http://admis.hp.nic.in/epraman/https://www.hpsbys.in/) is the online service delivery portal by Himachal Pradesh Govt. Digital Health card is available in DigiLocker. Aslo can be pulled into citizens' DigiLocker accounts.
The Oriental Insurance Co. Ltd.
apisetu.gov.in
General Insurance policies such as Motor, Health, Travel, Property, Engineering e.t.c issued by The Oriental Insurance are available to be pulled for citizens of India.
OPTIMADE API
optimade.local
The Open Databases Integration for Materials Design (OPTIMADE) consortium aims to make materials databases interoperational by developing a common REST API.
This specification is generated using optimade-python-tools v0.16.0.
This specification is generated using optimade-python-tools v0.16.0.