Mock sample for your project: Transport Department, Uttar Pradesh API

Driving License (DL) and Vehicle Registration Certificate (RC) of the State, as available on Parivahan Sewa (http://parivahan.co.in/) of Ministry of Road Transport and Highways, are available on DigiLocker. Citizens can pull these documents into their DigiLocker accounts.

Himachal Pradesh Swasthya Bima Yojna Society (http://admis.hp.nic.in/epraman/https://www.hpsbys.in/) is the online service delivery portal by Himachal Pradesh Govt. Digital Health card is available in DigiLocker. Aslo can be pulled into citizens' DigiLocker accounts.

Class X and XII marksheets and passing certificates of Maharashtra State Board of Secondary and Higher Secondary Education (https://mahahsscboard.maharashtra.gov.in/) are available in DigiLocker for years 1990 to 2017.

Board of Ayurvedic and Unani Systems of Medicine, Himachal Pradesh (http://hpayushboard.org/) is the online service portal by Govt. of Himachal Pradesh. Registration Certificate issued online, can be pulled into citizens DigiLocker accounts.

CBBSE (http://cgbse.nic.in) is issuing marksheets through DigiLocker. These can be pulled by students into their DigiLocker accounts. Currently available -2001,2003 - 2017 Class X and 2001 - 2017 Class XII .

Joint Entrance Examination Council (https://jeecup.nic.in) is providing digital Admit Cards for 2018 entrance examination of Diploma courses in the Polytechnics / Institutes affiliated to Board Of Technical Education, U.P.

The Importer-Exporter Code (IEC), issued by Directorate General of Foreign Trade (DGFT), is a key business identification number which is mandatory for Exports or Imports. This API can be used to get details of a importer-exporter by importer-exporter code.

APIs provided by Department of Pension and Pensioners Welfare.

APIs provided by Goa State Board of Secondary and Higher Secondary Education, Goa.

Life Insurance policies issued by Life Insurance Corporation of India (https://www.licindia.in/) are available on DigiLocker and can be downloaded by citizens to their account.

Himachal Pradesh Takniki Shiksha Board, Dharamshala (http://www.hptechboard.com/) has made available Diploma Certificate in DigiLocker, which can be pulled by students into their DigiLocker account.

APIs provided by eDistrict Odisha ServicePlus, Odisha.

APIs provided by Directorate of Municipal Administration, Karnataka.

All India Institute of Medical Sciences Patna, previously Jaya Prakash Narayan All India Institute of Medical Sciences, is a medical college and medical research public institute located in Phulwari Sharif, Patna, Bihar,

Bihar School Examination Board, Patna (http://biharboardonline.bihar.gov.in) has made available Class X (2018) marksheets and provisional certificates, which can be pulled by students into their accounts.

Our atmosphere protects us from a hostile space radiation environment comprising high energy particles of solar and intergalactic origin. Solar radiation is significant during unpredictable and short lived solar flares and coronal mass ejections (CMEs); however, galactic cosmic radiation (GCR) is omnipresent. The GCR intensity varies with latitude, longitude, and time due to effects of solar activity on the interplanetary magnetic field, as well as the Earth's magnetic field. Space radiation collides with gases in the atmosphere, leading to a complex shower of high energy radiation, the intensity and composition of which varies spatially and temporally. Excessive exposure to radiation can damage DNA and lead to long-term health effects such as an increased risk of cancer. Resulting radiation levels at commercial aircraft altitudes are greater than at sea level due. Aircrew are classified as radiation workers in some countries; however, planning to limit their exposure, and monitoring, is generally lacking. Both real-time measurements and predictive models of radiation in the atmosphere are important to mitigate the radiation risk crew.
We host a RESTful API to models of cosmic ray induced ionising radiation in the atmosphere. The PARMA or CARI7 endpoints can be used to calculate Effective Dose or Ambient Dose Equivalent at a point.
The Route Dose API calculates the same quantities along a great circle route between two airports using CARI7.
API requests must contain a key "API-Key" in the header (see code samples). Obtain a key from here.
Help us improve the quality of our web APIs by completing our 2 minute survey here.
Amentum Pty Ltd is not responsible nor liable for any loss or damage of any sort incurred as a result of using the API.
Copyright Amentum Pty Ltd 2021.

Driving License (DL) and Vehicle Registration Certificate (RC) of the State, as available on Parivahan Sewa (http://parivahan.co.in/) of Ministry of Road Transport and Highways, are available on DigiLocker. Citizens can pull these documents into their DigiLocker accounts.

The OpenAPI documentation for the RESTful interface of the Carl-Maria-von-Weber-Gesamtausgabe. (No registration, authentication, or API key is required) For feedback or requests about this API please contact [email protected] or start the discussion at https://github.com/Edirom/WeGA-WebApp

Last Modified: Thu Oct 29 12:30:46 PDT 2020
All endpoints are only accessible via HTTPS.
All API endpoints are located at https://platform.climate.com (e.g.
https://platform.climate.com/v4/fields).
The authorization token endpoint is located at
https://api.climate.com/api/oauth/token.
Troubleshooting
X-Http-Request-Id response header will be returned on every call,
successful or not. If you experience an issue with our api and need
to contact technical support, please supply the value of the X-Http-Request-Id
header along with an approximate time of when the request was made.
Request Limits
When you’re onboarded to Climate’s API platform, your x-api-key is assigned a custom usage plan. Usage plans are unique to each partner and have the following key attributes:
Throttling information
burstLimit: Maximum rate limit over a period ranging from 1 second to a few seconds
rateLimit: A steady-state rate limit
Quota information
Limit: The maximum number of requests that can be made in a given month
When the request rate threshold is exceeded, a 429 response code is returned. Optionally, the Retry-After header may be returned:
Following are examples of rate limit errors:
Rate limit exceeded:
HTTP/1.1 429
Content-Type: application/json
Content-Length: 32
{"message":"Too Many Requests"}
Quota exhausted:
HTTP/1.1 429
Content-Type: application/json
Content-Length: 29
{"message":"Limit Exceeded"}
Pagination
Pagination is performed via headers. Any request which returns a "results"
array may be paginated. The following figure shows how query results are laid out with
X-Limit=4 and no filter applied.
If there are no results, a response code of 304 will be returned.
If the response is the last set of results, a response code of 200 or
206 will be returned.
If there are more results, a response code of 206 will be returned.
If X-Next-Token is provided in the request headers but the token has
expired, a response code of 409 will be returned. This is only applicable
for some endpoints; see specific endpoint documentation below.
X-Limit
The page size can be controlled with the X-Limit header. Valid values are
1-100 and defaults to 100.
X-Next-Token
If the results are paginated, a response header of X-Next-Token will be
returned. Use the associated value in the subsequent request (via the X-Next-Token
request header) to retrieve the next page. The following sequence diagram shows how to
use X-Next-Token to fetch all the records.
Chunked Uploads
Uploads larger than 5MiB (5242880 bytes) must be done in 5MiB chunks
(with the exception of the final chunk). Each chunk request MUST contain a
Content-Range header specifying the portion of the upload, and a Content-Type
header specifying binary content type (application/octet-stream). Range
uploads must be contiguous. The maximum upload size is capped at 500MiB (524288000 bytes).
Chunked Downloads
Downloads larger than 5MiB (5242880 bytes) must be done in 1-5MiB
chunks (with the exception of the final chunk, which may be less than 1MiB).
Each chunk request MUST contain a Range header specifying the requested portion of the download,
and an Accept header specifying binary and json content types (application/octet-stream,application/json)
or all content types (/).
Drivers
If you need drivers to process agronomic data, download the ADAPT plugin below. We only support the plugin in the Windows environment, minimum is Windows 7 SP1.
For asPlanted, asHarvested and asApplied data:
ADAPT Plugin
Release notes can be found here.
Download and use of the ADAPT plugin means that you agree to the EULA for use of the ADAPT plugin.
Please review the EULA (last updated on June 6th, 2019) before download and use of the ADAPT plugin.
For more information, please refer to:
ADAPT Resources
ADAPT Overview
ADAPT FAQ
ADAPT Videos
Sample Test Data
Sample agronomic data:
asPlanted and asHarvested data
asApplied data set 1
asApplied data set 2
To upload the sample data to your account, please follow the instructions in this link.
Sample soil data:
Sample soil data

You can use the CORE API to access the
resources harvested and enriched by CORE. If you encounter any problems with the API, please report them to us.
Overview
The API is organised by resource type. The resources are articles,
journals and repositories and are represented using JSON data format. Furthermore,
each resource has a list of methods. The API also provides two global methods for accessing all resources at once.
Response format
Response for each query contains two fields: status and data.
In case of an error status, the data field is empty. The data field contains a single object
in case the request is for a specific identifier (e.g. CORE ID, CORE repository ID, etc.), or
contains a list of objects, for example for search queries. In case of batch requests, the response
is an array of objects, each of which contains its own status and data fields.
For search queries the response contains an additional field totalHits, which is the
total number of items which match the search criteria.
Search query syntax
Complex search queries can be used in all of the API search methods.
The query can be a simple string or it can be built using terms and operators described in Elasticsearch
documentation.
The usable field names are title, description, fullText,
authors, publisher, repositories.id, repositories.name,
doi, oai, identifiers (which is a list of article identifiers including OAI, URL, etc.), language.name
and year. Some example queries:
title:psychology and language.name:English
repositories.id:86 AND year:2014
identifiers:"oai:aura.abdn.ac.uk:2164/3837" OR identifiers:"oai:aura.abdn.ac.uk:2164/3843"
doi:"10.1186/1471-2458-6-309"
Retrieving the latest Articles
You can retrieve the harvested items since specific dates using the following queries:
repositoryDocument.metadataUpdated:>2017-02-10
repositoryDocument.metadataUpdated:>2017-03-01 AND repositoryDocument.metadataUpdated:
Sort order
For search queries, the results are ordered by relevance score. For batch
requests, the results are retrieved in the order of the requests.
Parameters
The API methods allow different parameters to be passed. Additionally, there is an API key parameter which is common to all API methods. For all API methods
the API key can be provided either as a query parameter or in the request header. If the API key
is not provided, the API will return HTTP 401 error. You can register for an API key here.
API methods

BC Laws is an electronic library providing free public access to the laws of British Columbia. BC Laws is hosted by the Queen's Printer of British Columbia and published in partnership with the Ministry of Justice and the Law Clerk of the Legislative Assembly.BC Laws contains a comprehensive collection of BC legislation and related materials. It is available on the internet in two forms:First: The library is available as a web site in which users can browse and search the laws of British Columbia.Second: The library is available as a portal to legislation in raw XML data format, accessible via the BC Laws API2. This direct access to raw data is intended to enable third parties to build or add their own custom applications based on the structure of the data and all the associated search functionality inherent in that structure. The BC Laws website itself is an example of one such application.
Please note that you may experience issues when submitting requests to the delivery or test environment if using this OpenAPI specification in other API console viewers.

The Unified Taxonomic Information Service (UTIS) is the taxonomic backbone for the EU-BON project

An API collection for Covid 19 by Crediwatch

Ration Cards issued by The Department of Civil Supplies functions under the Department of Food, Civil Supplies and Consumer Affairs of the Government of Kerala. (https://civilsupplieskerala.gov.in/) are available for download on DigiLocker.