Mock sample for your project: National Health Authority API
Integrate with "National Health Authority API" from apisetu.gov.in in no time with Mockoon's ready to use mock sample
National Health Authority
apisetu.gov.in
Version: 3.0.0
Integrate third-party APIs faster by using "National Health Authority API" ready-to-use mock sample. Mocking this API will help you accelerate your development lifecycles and improves your integration tests' quality and reliability by accounting for random failures, slow response time, etc.
It also helps reduce your dependency on third-party APIs: no more accounts to create, API keys to provision, accesses to configure, unplanned downtime, etc.
Description
More than 8 Crore PM-JAY e-cards are now available on DigiLocker.Beneficiaries can access PMJAY e-cards on their respective Digilocker account under issued document section.
Other APIs by apisetu.gov.in
Transport Department, West Bengal
apisetu.gov.in
Driving License (DL) and Vehicle Registration Certificate (RC) of the State, as available on Parivahan Sewa (http://parivahan.co.in/) of Ministry of Road Transport and Highways, are available on DigiLocker. Citizens can pull these documents into their DigiLocker accounts.
Future Generali Total Insurance Solutions
apisetu.gov.in
Two Wheeler, Car, Commercial Vehicle, Home and Travel Insurance policies issued by Future Generali are available on DigiLocker and can be pulled by citizens in their account.
Acko General Insurance Limited
apisetu.gov.in
Insurance policies issued by Acko General Insurance (https://www.acko.com) can be fetched by the citizens in their Digilocker accounts.
Food, Civil Supplies and Consumer Affairs Department, Karnataka
apisetu.gov.in
Ration Cards issued by Food, Civil Supplies and Consumer Affairs Department, Karnataka (https://ahara.kar.nic.in) are available for download on DigiLocker.
Andaman Law College, Andaman & Nicobar
apisetu.gov.in
Transfer Certificate issued by Andaman Law College can be downloaded in citizen's DigiLocker account.
Krishna Kanta Handique State Open University (KKHSOU), Assam
apisetu.gov.in
Krishna Kanta Handiqui State Open University (http://www.kkhsou.in//) has made available their Results of MA (Education,Assamese,Political Sc,Sociology,English) & MBA programmes, for the year 2018, in DigiLocker, which can be pulled by students into their accounts.
AIIMS Rishikesh
apisetu.gov.in
Degree certificates issued by AIIMS Rishikesh in year 2018 can be pulled by students into their DigiLocker accounts
Food and Supplies Department, Haryana
apisetu.gov.in
Ration Cards issued by Food & Supplies Department, Haryana (http://haryanafood.gov.in/) are available for download on DigiLocker.
Panchayati Raj Department, Himachal Pradesh, Himachal Pradesh
apisetu.gov.in
Parivar Patra (http://aadhaar.hp.gov.in/epanchayat/) is the online service portal by Govt. of Himachal Pradesh. Parivar Register issued online certificate can be pulled into citizens' DigiLocker accounts.
Goa Water Resources Department, Goa
apisetu.gov.in
Goa WRD (https://goawrd.gov.in/) is the official departmental portal of the Water Resources Department, Govt. of Goa, through which citizens can avail time bound service being offered by the department. Certificates issued by it (e.g. Contractor Enlistment, Well Registration etc) are made available in citizens' DigiLocker accounts.
University Of Delhi
apisetu.gov.in
University of Delhi (http://www.du.ac.in/) is issuing Degree certificates through DigiLocker. These can be pulled by students into their DigiLocker accounts. Currently data for 2017 is available.
Jharsewa (eDistrict), Jharkhand
apisetu.gov.in
Jharkhand e-District is a comprehensive and web enabled service portal that acts as an electronic gateway into the Government's portfolio of services. Jharsewa provides Certificates like Birth, Death, Income, Caste and Residence Certificates in Digilocker.
Other APIs in the same category
Chhattisgarh State Board of Secondary Education, Chhattisgarh
apisetu.gov.in
CBBSE (http://cgbse.nic.in) is issuing marksheets through DigiLocker. These can be pulled by students into their DigiLocker accounts. Currently available -2001,2003 - 2017 Class X and 2001 - 2017 Class XII .
The Oriental Insurance Co. Ltd.
apisetu.gov.in
General Insurance policies such as Motor, Health, Travel, Property, Engineering e.t.c issued by The Oriental Insurance are available to be pulled for citizens of India.
Kotak Mahindra General Insurance Company Ltd.
apisetu.gov.in
Insurance Policies such as Health, Car, Two Wheeler, Group, Home etc. issued by KOTAK MAHINDRA GENERAL INSURANCE are available to be pulled by citizens.
Antyodaya Saral Haryana, Haryana
apisetu.gov.in
APIs provided by Antyodaya Saral Haryana, Haryana.
Transport Department, Gujarat
apisetu.gov.in
Driving License (DL) and Vehicle Registration Certificate (RC) of the State, as available on Parivahan Sewa (http://parivahan.co.in/) of Ministry of Road Transport and Highways, are available on DigiLocker. Citizens can pull these documents into their DigiLocker accounts.
Climate FieldView Platform APIs
climate.com
Last Modified: Thu Oct 29 12:30:46 PDT 2020
All endpoints are only accessible via HTTPS.
All API endpoints are located at https://platform.climate.com (e.g.
https://platform.climate.com/v4/fields).
The authorization token endpoint is located at
https://api.climate.com/api/oauth/token.
Troubleshooting
X-Http-Request-Id response header will be returned on every call,
successful or not. If you experience an issue with our api and need
to contact technical support, please supply the value of the X-Http-Request-Id
header along with an approximate time of when the request was made.
Request Limits
When youâre onboarded to Climateâs API platform, your x-api-key is assigned a custom usage plan. Usage plans are unique to each partner and have the following key attributes:
Throttling information
burstLimit: Maximum rate limit over a period ranging from 1 second to a few seconds
rateLimit: A steady-state rate limit
Quota information
Limit: The maximum number of requests that can be made in a given month
When the request rate threshold is exceeded, a 429 response code is returned. Optionally, the Retry-After header may be returned:
Following are examples of rate limit errors:
Rate limit exceeded:
HTTP/1.1 429
Content-Type: application/json
Content-Length: 32
{"message":"Too Many Requests"}
Quota exhausted:
HTTP/1.1 429
Content-Type: application/json
Content-Length: 29
{"message":"Limit Exceeded"}
Pagination
Pagination is performed via headers. Any request which returns a "results"
array may be paginated. The following figure shows how query results are laid out with
X-Limit=4 and no filter applied.
If there are no results, a response code of 304 will be returned.
If the response is the last set of results, a response code of 200 or
206 will be returned.
If there are more results, a response code of 206 will be returned.
If X-Next-Token is provided in the request headers but the token has
expired, a response code of 409 will be returned. This is only applicable
for some endpoints; see specific endpoint documentation below.
X-Limit
The page size can be controlled with the X-Limit header. Valid values are
1-100 and defaults to 100.
X-Next-Token
If the results are paginated, a response header of X-Next-Token will be
returned. Use the associated value in the subsequent request (via the X-Next-Token
request header) to retrieve the next page. The following sequence diagram shows how to
use X-Next-Token to fetch all the records.
Chunked Uploads
Uploads larger than 5MiB (5242880 bytes) must be done in 5MiB chunks
(with the exception of the final chunk). Each chunk request MUST contain a
Content-Range header specifying the portion of the upload, and a Content-Type
header specifying binary content type (application/octet-stream). Range
uploads must be contiguous. The maximum upload size is capped at 500MiB (524288000 bytes).
Chunked Downloads
Downloads larger than 5MiB (5242880 bytes) must be done in 1-5MiB
chunks (with the exception of the final chunk, which may be less than 1MiB).
Each chunk request MUST contain a Range header specifying the requested portion of the download,
and an Accept header specifying binary and json content types (application/octet-stream,application/json)
or all content types (/).
Drivers
If you need drivers to process agronomic data, download the ADAPT plugin below. We only support the plugin in the Windows environment, minimum is Windows 7 SP1.
For asPlanted, asHarvested and asApplied data:
ADAPT Plugin
Release notes can be found here.
Download and use of the ADAPT plugin means that you agree to the EULA for use of the ADAPT plugin.
Please review the EULA (last updated on June 6th, 2019) before download and use of the ADAPT plugin.
For more information, please refer to:
ADAPT Resources
ADAPT Overview
ADAPT FAQ
ADAPT Videos
Sample Test Data
Sample agronomic data:
asPlanted and asHarvested data
asApplied data set 1
asApplied data set 2
To upload the sample data to your account, please follow the instructions in this link.
Sample soil data:
Sample soil data
All endpoints are only accessible via HTTPS.
All API endpoints are located at https://platform.climate.com (e.g.
https://platform.climate.com/v4/fields).
The authorization token endpoint is located at
https://api.climate.com/api/oauth/token.
Troubleshooting
X-Http-Request-Id response header will be returned on every call,
successful or not. If you experience an issue with our api and need
to contact technical support, please supply the value of the X-Http-Request-Id
header along with an approximate time of when the request was made.
Request Limits
When youâre onboarded to Climateâs API platform, your x-api-key is assigned a custom usage plan. Usage plans are unique to each partner and have the following key attributes:
Throttling information
burstLimit: Maximum rate limit over a period ranging from 1 second to a few seconds
rateLimit: A steady-state rate limit
Quota information
Limit: The maximum number of requests that can be made in a given month
When the request rate threshold is exceeded, a 429 response code is returned. Optionally, the Retry-After header may be returned:
Following are examples of rate limit errors:
Rate limit exceeded:
HTTP/1.1 429
Content-Type: application/json
Content-Length: 32
{"message":"Too Many Requests"}
Quota exhausted:
HTTP/1.1 429
Content-Type: application/json
Content-Length: 29
{"message":"Limit Exceeded"}
Pagination
Pagination is performed via headers. Any request which returns a "results"
array may be paginated. The following figure shows how query results are laid out with
X-Limit=4 and no filter applied.
If there are no results, a response code of 304 will be returned.
If the response is the last set of results, a response code of 200 or
206 will be returned.
If there are more results, a response code of 206 will be returned.
If X-Next-Token is provided in the request headers but the token has
expired, a response code of 409 will be returned. This is only applicable
for some endpoints; see specific endpoint documentation below.
X-Limit
The page size can be controlled with the X-Limit header. Valid values are
1-100 and defaults to 100.
X-Next-Token
If the results are paginated, a response header of X-Next-Token will be
returned. Use the associated value in the subsequent request (via the X-Next-Token
request header) to retrieve the next page. The following sequence diagram shows how to
use X-Next-Token to fetch all the records.
Chunked Uploads
Uploads larger than 5MiB (5242880 bytes) must be done in 5MiB chunks
(with the exception of the final chunk). Each chunk request MUST contain a
Content-Range header specifying the portion of the upload, and a Content-Type
header specifying binary content type (application/octet-stream). Range
uploads must be contiguous. The maximum upload size is capped at 500MiB (524288000 bytes).
Chunked Downloads
Downloads larger than 5MiB (5242880 bytes) must be done in 1-5MiB
chunks (with the exception of the final chunk, which may be less than 1MiB).
Each chunk request MUST contain a Range header specifying the requested portion of the download,
and an Accept header specifying binary and json content types (application/octet-stream,application/json)
or all content types (/).
Drivers
If you need drivers to process agronomic data, download the ADAPT plugin below. We only support the plugin in the Windows environment, minimum is Windows 7 SP1.
For asPlanted, asHarvested and asApplied data:
ADAPT Plugin
Release notes can be found here.
Download and use of the ADAPT plugin means that you agree to the EULA for use of the ADAPT plugin.
Please review the EULA (last updated on June 6th, 2019) before download and use of the ADAPT plugin.
For more information, please refer to:
ADAPT Resources
ADAPT Overview
ADAPT FAQ
ADAPT Videos
Sample Test Data
Sample agronomic data:
asPlanted and asHarvested data
asApplied data set 1
asApplied data set 2
To upload the sample data to your account, please follow the instructions in this link.
Sample soil data:
Sample soil data
eNanoMapper database
AMBIT REST web services [eNanoMapper profile] with free text & faceted search
Jharkhand State Board (Jharkhand Academic Council), Jharkhand
apisetu.gov.in
Jharkhand Academic Council (JAC) is issuing marksheets & passing certificates through DigiLocker. These can be pulled by students into their DigiLocker accounts. Currently available - 2009-2017 [Class XII], 2009-2017 [Class X].
CROssBAR Data API
ebi.ac.uk
About CROssBAR & data
CROssBAR: Comprehensive Resource of Biomedical Relations with Deep Learning Applications and Knowledge Graph Representations
CROssBAR is a comprehensive system that integrates large-scale biomedical data from various resources e.g UniProt, ChEMBL, Drugbank, EFO, HPO, InterPro & PubChem and stores them in a new NoSQL database, enrich these data with deep learning based prediction of relations between numerous biomedical entities, rigorously analyse the enriched data to obtain biologically meaningful modules and display them to the user via easy to interpret, interactive and heterogeneous knowledge graphs.
CROssBAR platform exposes a set of 12 endpoints to query data stored in the CROssBAR database. These endpoints help the user to find data of interest using different parameters provided by the API endpoint.
For example,
https://www.ebi.ac.uk/tools/crossbar/proteins?accession=A0A023GRW5 -> will provide protein information about accession 'A0A023GRW5' including its interactions, functions, cross-references, variations and more.
https://www.ebi.ac.uk/tools/crossbar/activities?moleculeChemblId=CHEMBL465983 -> will provide ChEMBL bio-interactions related information including targets and bio-activity measurements associated with molecule chembl id 'CHEMBL465983'
Knowledge graphs
Another use case of CROssBAR's API endpoints is in building knowledge graphs. These endpoints can be weaved together (output from one API endpoint fed as input to another API endpoint) programmatically to link nodes like protein, disease, drugs etc. as nodes of the graph. The endpoints are designed to be independent from each other which allows users the flexibility to drive biological networks from any facet e.g drug-centric, disease-centric, gene-centric etc. Our service for knowledge graph construction is available at https://crossbar.kansil.org.
An example for the part of the background queries on the CROssBAR API during the construction of a knowledge graph,
(with the aim of keeping the example simple, we have only included the processes related to pathways, genes/proteins and drugs/compounds)
In this example, we would like to find bio-active compounds (with a pChEMBL value threshold of at least 6.0) & drugs targeting all proteins belonging to "WNT ligand biogenesis and trafficking" pathway (based on Reactome pathway annotations).
This can be achieved by using endpoints listed on this swagger documentation as illustrated in following steps-
Find bio-active compounds (with a pChEMBL value threshold of at least 6.0) & drugs targeting all proteins belonging to "WNT ligand biogenesis and trafficking" pathway (based on Reactome annotations)
This can be achieved by using endpoints listed on this swagger documentation as illustrated in following steps-
Get all proteins from â/proteinsâ API endpoint which have a reactome pathway name equal to "WNT ligand biogenesis and trafficking".
From the collection of uniprot protein accessions collected from step 1 above, we query â/targetsâ API endpoint to obtain the âtargetchemblidâs of these proteins.
From the collection of targetchemblids collected from step 2 above, we query â/activitiesâ API endpoint with pChEMBL value >=6, to obtain the âmoleculechemblidâs of the molecules that we need.
From the collection of uniprot protein accessions collected from step 1 above, we find out Drug names and ids from the â/drugsâ API endpoint that targets our proteins.
From the collection of âmoleculechemblidâs obtained in step3, we query â/moleculesâ endpoint to get the compounds that are interacting with the genes/proteins belonging to the âWNT ligand biogenesis and traffickingâ pathway.
CROssBAR: Comprehensive Resource of Biomedical Relations with Deep Learning Applications and Knowledge Graph Representations
CROssBAR is a comprehensive system that integrates large-scale biomedical data from various resources e.g UniProt, ChEMBL, Drugbank, EFO, HPO, InterPro & PubChem and stores them in a new NoSQL database, enrich these data with deep learning based prediction of relations between numerous biomedical entities, rigorously analyse the enriched data to obtain biologically meaningful modules and display them to the user via easy to interpret, interactive and heterogeneous knowledge graphs.
CROssBAR platform exposes a set of 12 endpoints to query data stored in the CROssBAR database. These endpoints help the user to find data of interest using different parameters provided by the API endpoint.
For example,
https://www.ebi.ac.uk/tools/crossbar/proteins?accession=A0A023GRW5 -> will provide protein information about accession 'A0A023GRW5' including its interactions, functions, cross-references, variations and more.
https://www.ebi.ac.uk/tools/crossbar/activities?moleculeChemblId=CHEMBL465983 -> will provide ChEMBL bio-interactions related information including targets and bio-activity measurements associated with molecule chembl id 'CHEMBL465983'
Knowledge graphs
Another use case of CROssBAR's API endpoints is in building knowledge graphs. These endpoints can be weaved together (output from one API endpoint fed as input to another API endpoint) programmatically to link nodes like protein, disease, drugs etc. as nodes of the graph. The endpoints are designed to be independent from each other which allows users the flexibility to drive biological networks from any facet e.g drug-centric, disease-centric, gene-centric etc. Our service for knowledge graph construction is available at https://crossbar.kansil.org.
An example for the part of the background queries on the CROssBAR API during the construction of a knowledge graph,
(with the aim of keeping the example simple, we have only included the processes related to pathways, genes/proteins and drugs/compounds)
In this example, we would like to find bio-active compounds (with a pChEMBL value threshold of at least 6.0) & drugs targeting all proteins belonging to "WNT ligand biogenesis and trafficking" pathway (based on Reactome pathway annotations).
This can be achieved by using endpoints listed on this swagger documentation as illustrated in following steps-
Find bio-active compounds (with a pChEMBL value threshold of at least 6.0) & drugs targeting all proteins belonging to "WNT ligand biogenesis and trafficking" pathway (based on Reactome annotations)
This can be achieved by using endpoints listed on this swagger documentation as illustrated in following steps-
Get all proteins from â/proteinsâ API endpoint which have a reactome pathway name equal to "WNT ligand biogenesis and trafficking".
From the collection of uniprot protein accessions collected from step 1 above, we query â/targetsâ API endpoint to obtain the âtargetchemblidâs of these proteins.
From the collection of targetchemblids collected from step 2 above, we query â/activitiesâ API endpoint with pChEMBL value >=6, to obtain the âmoleculechemblidâs of the molecules that we need.
From the collection of uniprot protein accessions collected from step 1 above, we find out Drug names and ids from the â/drugsâ API endpoint that targets our proteins.
From the collection of âmoleculechemblidâs obtained in step3, we query â/moleculesâ endpoint to get the compounds that are interacting with the genes/proteins belonging to the âWNT ligand biogenesis and traffickingâ pathway.
Stationsdatenbereitstellung
deutschebahn.com
An API providing master data for German railway stations by DB Station&Service AG.
Uttarakhand State Board of School Education, Uttarakhand
apisetu.gov.in
Uttarakhand Board of School Education, Ramnagar (http://ubse.uk.gov.in/) has made available Class X (2018) & Class XII (2018) mark sheet-cum-certificate and migration certificates, which can be pulled by students into their DigiLocker accounts.
Reisezentren-API
deutschebahn.com
This REST-API enables you to query information about travel centers in Germany.