Mock sample for your project: OSF APIv2 Documentation
Integrate with "OSF APIv2 Documentation" from osf.io in no time with Mockoon's ready to use mock sample
OSF APIv2 Documentation
Version: 2.0
Speed up your application development by using "OSF APIv2 Documentation" ready-to-use mock sample. Mocking this API will help you accelerate your development lifecycles and allow you to stop relying on an external API to get the job done. No more API keys to provision, accesses to configure or unplanned downtime, just work.
Enhance your development infrastructure by mocking third party APIs during integrating testing.
Description
https://api.osf.io/v2/
Other APIs in the same category
Healthcare
TheTVDB API v3
thetvdb.com
API v3 targets v2 functionality with a few minor additions. The API is accessible via https://api.thetvdb.com and provides the following REST endpoints in JSON format.
How to use this API documentation
You may browse the API routes without authentication, but if you wish to send requests to the API and see response data, then you must authenticate.
Obtain a JWT token by POSTing to the /login route in the Authentication section with your API key and credentials.
Paste the JWT token from the response into the "JWT Token" field at the top of the page and click the 'Add Token' button.
You will now be able to use the remaining routes to send requests to the API and get a response.
Language Selection
Language selection is done via the Accept-Language header. At the moment, you may only pass one language abbreviation in the header at a time. Valid language abbreviations can be found at the /languages route..
Authentication
Authentication to use the API is similar to the How-to section above. Users must POST to the /login route with their API key and credentials in the following format in order to obtain a JWT token.
{"apikey":"APIKEY","username":"USERNAME","userkey":"USERKEY"}
Note that the username and key are ONLY required for the /user routes. The user's key is labled Account Identifier in the account section of the main site.
The token is then used in all subsequent requests by providing it in the Authorization header. The header will look like: Authorization: Bearer . Currently, the token expires after 24 hours. You can GET the /refresh_token route to extend that expiration date.
Versioning
You may request a different version of the API by including an Accept header in your request with the following format: Accept:application/vnd.thetvdb.v$VERSION. This documentation automatically uses the version seen at the top and bottom of the page.
How to use this API documentation
You may browse the API routes without authentication, but if you wish to send requests to the API and see response data, then you must authenticate.
Obtain a JWT token by POSTing to the /login route in the Authentication section with your API key and credentials.
Paste the JWT token from the response into the "JWT Token" field at the top of the page and click the 'Add Token' button.
You will now be able to use the remaining routes to send requests to the API and get a response.
Language Selection
Language selection is done via the Accept-Language header. At the moment, you may only pass one language abbreviation in the header at a time. Valid language abbreviations can be found at the /languages route..
Authentication
Authentication to use the API is similar to the How-to section above. Users must POST to the /login route with their API key and credentials in the following format in order to obtain a JWT token.
{"apikey":"APIKEY","username":"USERNAME","userkey":"USERKEY"}
Note that the username and key are ONLY required for the /user routes. The user's key is labled Account Identifier in the account section of the main site.
The token is then used in all subsequent requests by providing it in the Authorization header. The header will look like: Authorization: Bearer . Currently, the token expires after 24 hours. You can GET the /refresh_token route to extend that expiration date.
Versioning
You may request a different version of the API by including an Accept header in your request with the following format: Accept:application/vnd.thetvdb.v$VERSION. This documentation automatically uses the version seen at the top and bottom of the page.
Veteran Confirmation
va.gov
The Veteran Confirmation API allows you to confirm Veteran status for a given person. This can be useful for offering Veterans discounts or other benefits.
The API will only return “Confirmed” or “Not Confirmed”.
Quickstart Guide
1. Get Access Credentials
Get started by filling out the form on the Apply for VA Lighthouse Developer Access page.
After submitting a request, you will receive your credentials for using the API in the Development environment, which allows you to try it out with mock data before moving to the Production environment.
2. Test the API
In the endpoint documentation below, we've provided a curl command builder for trying out the API before implementation with your app.
Use Test User attributes to populate the request body.
3. Build your app
The base URI for the Veteran Confirmation API in the Sandbox environment is:
https://sandbox-api.va.gov/services/veteran_confirmation/v0
In this environment, use attributes from the list of Test Users. Only Test Users can return a "confirmed" response.
Check out some of our sample apps. Please visit our VA Lighthouse Support portal should you need further assistance.
4. Show us a demo and get access to the Production environment
After building your app, we ask that you give us a demo before we set you up with production credentials. Please see the Path to Production page for more details.
Authorization
This API requires an API key in combination with identifiable information for the person being confirmed listed below. API requests are authorized through a symmetric API token provided in an HTTP header with name apikey. Including more information has a better chance of making a match and returning a Confirmed status.
Required information:
First Name
Last Name
Date of Birth
Social Security Number
Optional information:
Middle Name
Gender
Reference
Sandbox vs. Production Data
APIs accessed via the Sandbox environment are using the same underlying logic as VA’s production APIs; only the underlying data store is different.
Master Veteran Index (MVI)
The Master Veteran Index confirms a user's identity. In Production, several factors are considered to confirm identity. These include: a user’s first name, last name, date of birth and Social Security number. The MVI is mocked in the Sandbox environment. In this environment, the only factor used to confirm identity is the Social Security number.
Rate Limiting
We implemented basic rate limiting of 60 requests per minute. If you exceed this quota, your request will return a 429 status code. You may petition for increased rate limits by emailing and requests will be decided on a case by case basis.
Raw Open API Spec
https://api.va.gov/services/veteran_confirmation/docs/v0/api
The API will only return “Confirmed” or “Not Confirmed”.
Quickstart Guide
1. Get Access Credentials
Get started by filling out the form on the Apply for VA Lighthouse Developer Access page.
After submitting a request, you will receive your credentials for using the API in the Development environment, which allows you to try it out with mock data before moving to the Production environment.
2. Test the API
In the endpoint documentation below, we've provided a curl command builder for trying out the API before implementation with your app.
Use Test User attributes to populate the request body.
3. Build your app
The base URI for the Veteran Confirmation API in the Sandbox environment is:
https://sandbox-api.va.gov/services/veteran_confirmation/v0
In this environment, use attributes from the list of Test Users. Only Test Users can return a "confirmed" response.
Check out some of our sample apps. Please visit our VA Lighthouse Support portal should you need further assistance.
4. Show us a demo and get access to the Production environment
After building your app, we ask that you give us a demo before we set you up with production credentials. Please see the Path to Production page for more details.
Authorization
This API requires an API key in combination with identifiable information for the person being confirmed listed below. API requests are authorized through a symmetric API token provided in an HTTP header with name apikey. Including more information has a better chance of making a match and returning a Confirmed status.
Required information:
First Name
Last Name
Date of Birth
Social Security Number
Optional information:
Middle Name
Gender
Reference
Sandbox vs. Production Data
APIs accessed via the Sandbox environment are using the same underlying logic as VA’s production APIs; only the underlying data store is different.
Master Veteran Index (MVI)
The Master Veteran Index confirms a user's identity. In Production, several factors are considered to confirm identity. These include: a user’s first name, last name, date of birth and Social Security number. The MVI is mocked in the Sandbox environment. In this environment, the only factor used to confirm identity is the Social Security number.
Rate Limiting
We implemented basic rate limiting of 60 requests per minute. If you exceed this quota, your request will return a 429 status code. You may petition for increased rate limits by emailing and requests will be decided on a case by case basis.
Raw Open API Spec
https://api.va.gov/services/veteran_confirmation/docs/v0/api
OpenTrials API
opentrials.local
Krishna Kanta Handique State Open University (KKHSOU), Assam
apisetu.gov.in
Krishna Kanta Handiqui State Open University (http://www.kkhsou.in//) has made available their Results of MA (Education,Assamese,Political Sc,Sociology,English) & MBA programmes, for the year 2018, in DigiLocker, which can be pulled by students into their accounts.
National Insurance Company Ltd.
apisetu.gov.in
APIs provided by National Insurance Company Ltd..
Jharkhand State Board (Jharkhand Academic Council), Jharkhand
apisetu.gov.in
Jharkhand Academic Council (JAC) is issuing marksheets & passing certificates through DigiLocker. These can be pulled by students into their DigiLocker accounts. Currently available - 2009-2017 [Class XII], 2009-2017 [Class X].
Health Repository Provider Specifications for HIU
The following are the specifications for the APIs to be implemented at the Health Repository end if an entity is only serving the role of a HIU. The specs are essentially duplicates from the Gateway and Bridge, but put together so as to make it clear to HIUs which set of APIs they should implement to participate in the network.
The APIs are organized by the flows - identification, consent flow, data flow and monitoring. They represent the APIs that are expected to be available at the HIU end by the Gateway.
For majority of the APIs, if Gateway has initiated a call, there are corresponding callback APIs on the Gateway. e.g for /consents/hiu/notify API on HIU end, its expected that a corresponding callback API /consents/hiu/on-notify on Gateway is called. Such APIs are organized under the Gateway label.
Gateway relevant APIs for HIUs are grouped under Gateway label. These include the APIs that HIPs are required to call on the Gateway. For example, to request a CM for consent, HIU would call /consent-requests/init API on gateway.
NOTE, in some of the API documentations below, X-HIP-ID is mentioned in header (for example in /auth/on-init). These are the cases, when a particular API is applicable for both HIU and HIP (e.g an entity is playing the role of HRP representing both HIU and HIP). If you are only playing the role of HIP, then only X-HIU-ID header will be sent
The APIs are organized by the flows - identification, consent flow, data flow and monitoring. They represent the APIs that are expected to be available at the HIU end by the Gateway.
For majority of the APIs, if Gateway has initiated a call, there are corresponding callback APIs on the Gateway. e.g for /consents/hiu/notify API on HIU end, its expected that a corresponding callback API /consents/hiu/on-notify on Gateway is called. Such APIs are organized under the Gateway label.
Gateway relevant APIs for HIUs are grouped under Gateway label. These include the APIs that HIPs are required to call on the Gateway. For example, to request a CM for consent, HIU would call /consent-requests/init API on gateway.
NOTE, in some of the API documentations below, X-HIP-ID is mentioned in header (for example in /auth/on-init). These are the cases, when a particular API is applicable for both HIU and HIP (e.g an entity is playing the role of HRP representing both HIU and HIP). If you are only playing the role of HIP, then only X-HIU-ID header will be sent
eDistrict Kerala, Kerala
apisetu.gov.in
eDistrict Kerala (https://edistrict.kerala.gov.in/) is the online service delivery portal for Kerala State Govt. Certain documents issued by it (e.g. Residence, Income, Caste Certificates etc) are made available in citizens' DigiLocker accounts.
eNanoMapper database
AMBIT REST web services [eNanoMapper profile] with free text & faceted search