Mock sample for your project: Advicent.FactFinderService API
Integrate with "Advicent.FactFinderService API" from naviplancentral.com in no time with Mockoon's ready to use mock sample
Advicent.FactFinderService
naviplancentral.com
Version: v1
Speed up your application development by using "Advicent.FactFinderService API" ready-to-use mock sample. Mocking this API will help you accelerate your development lifecycles and allow you to stop relying on an external API to get the job done. No more API keys to provision, accesses to configure or unplanned downtime, just work.
Enhance your development infrastructure by mocking third party APIs during integrating testing.
Description
An API for accessing the NaviPlan Fact Finder.
Other APIs by naviplancentral.com
Other APIs in the same category
Business Registries
ato.gov.au
Introduction
The Business Registries API is built on HTTP. The API is RESTful. It has predictable resource URIs.
The API is documented in OpenAPI format.
In addition to the standard OpenAPI syntax we use a few
vendor extensions.
Overview
The following sections describe the resources that make up the Business Registries REST API.
Current Version
By default, all requests to https://api.abr.ato.gov.au receive the v1 version of the REST API. We encourage you to explicitly request this version via the Accept header.
Accept: application/vnd.abr-ato.v1+json
Schema
All API access is over HTTPS, and accessed from https://api.abr.ato.gov.au. All data is sent and received as JSON. Blank fields are included.
All dates use the ISO 8601 format:
YYYY-MM-DD
For example: 2017-07-01 (the 1st of July 2017)
All timestamps use the ISO 8601 format:
YYYY-MM-DDTHH:MM:SSZ
For example: 2017-07-01T11:05:06+10:00
Timezones
Some requests allow for specifying timestamps or generate timestamps with time zone information. We apply the following rules, in order of priority, to determine timezone information for API calls.
Explicitly provide an ISO 8601 timestamp with timezone information
For API calls that allow for a timestamp to be specified, we use that exact timestamp.
For example: 2017-07-01T11:05:06+10:00
Pagination
Information about pagination is provided in the Link header.
For example:
Link:; rel="next",; rel="last"
rel="next" states that the next page is page=2. This makes sense, since by default, all paginated queries start at page 1. rel="last" provides some more information, stating that the last page of results is on page 34. Accordingly, we have 33 more pages of information that we can consume.
Parameters
Many API methods take optional parameters:
GET /individuals/1234/addresses/?addressType='Mailing'
In this example, the '1234' value is provided for the :partyId parameter in the path while :addressType is passed in the query string.
For POST, PATCH, PUT, and DELETE requests, parameters not included in the URL should be encoded as JSON with a Content-Type of 'application/json'.
Metadata
The API provides metadata services that you can use to discover information about the classifcation schemes and values used by the Registry.
For example:
GET /classifications/roles
Sample response:
[
{
"id": "123e4567-e89b-12d3-a456-426655440001",
"role": "Director",
"roleDescription": "An individual responsible for managing a company's ...",
"relationship": "Directorship",
"reciprocalRole": "Company",
"reciprocalRoleDescription": "An incorporated legal entity."
},
{
...
}
]
Root Endpoint
You can issue a GET request to the root endpoint (also known as the service root) to get all the endpoint categories that the REST API supports:
curl https://api.abr.ato.gov.au
Authentication
The Business Registries API supports API Key authentication.
When you sign up for an account, you are given your first API key. You can generate additional API keys, and delete
API keys (as you may need to rotate your keys in the future). You authenticate to the Business Registries API by
providing your secret key in the request header.
Note: Some requests will return 404 Not Found, instead of 403 Permission Denied. This is to prevent the
accidental leakage of information to unauthorised users.
The Business Registries API is built on HTTP. The API is RESTful. It has predictable resource URIs.
The API is documented in OpenAPI format.
In addition to the standard OpenAPI syntax we use a few
vendor extensions.
Overview
The following sections describe the resources that make up the Business Registries REST API.
Current Version
By default, all requests to https://api.abr.ato.gov.au receive the v1 version of the REST API. We encourage you to explicitly request this version via the Accept header.
Accept: application/vnd.abr-ato.v1+json
Schema
All API access is over HTTPS, and accessed from https://api.abr.ato.gov.au. All data is sent and received as JSON. Blank fields are included.
All dates use the ISO 8601 format:
YYYY-MM-DD
For example: 2017-07-01 (the 1st of July 2017)
All timestamps use the ISO 8601 format:
YYYY-MM-DDTHH:MM:SSZ
For example: 2017-07-01T11:05:06+10:00
Timezones
Some requests allow for specifying timestamps or generate timestamps with time zone information. We apply the following rules, in order of priority, to determine timezone information for API calls.
Explicitly provide an ISO 8601 timestamp with timezone information
For API calls that allow for a timestamp to be specified, we use that exact timestamp.
For example: 2017-07-01T11:05:06+10:00
Pagination
Information about pagination is provided in the Link header.
For example:
Link:; rel="next",; rel="last"
rel="next" states that the next page is page=2. This makes sense, since by default, all paginated queries start at page 1. rel="last" provides some more information, stating that the last page of results is on page 34. Accordingly, we have 33 more pages of information that we can consume.
Parameters
Many API methods take optional parameters:
GET /individuals/1234/addresses/?addressType='Mailing'
In this example, the '1234' value is provided for the :partyId parameter in the path while :addressType is passed in the query string.
For POST, PATCH, PUT, and DELETE requests, parameters not included in the URL should be encoded as JSON with a Content-Type of 'application/json'.
Metadata
The API provides metadata services that you can use to discover information about the classifcation schemes and values used by the Registry.
For example:
GET /classifications/roles
Sample response:
[
{
"id": "123e4567-e89b-12d3-a456-426655440001",
"role": "Director",
"roleDescription": "An individual responsible for managing a company's ...",
"relationship": "Directorship",
"reciprocalRole": "Company",
"reciprocalRoleDescription": "An incorporated legal entity."
},
{
...
}
]
Root Endpoint
You can issue a GET request to the root endpoint (also known as the service root) to get all the endpoint categories that the REST API supports:
curl https://api.abr.ato.gov.au
Authentication
The Business Registries API supports API Key authentication.
When you sign up for an account, you are given your first API key. You can generate additional API keys, and delete
API keys (as you may need to rotate your keys in the future). You authenticate to the Business Registries API by
providing your secret key in the request header.
Note: Some requests will return 404 Not Found, instead of 403 Permission Denied. This is to prevent the
accidental leakage of information to unauthorised users.
Swiss NextGen Banking API-Framework
Summary
The Swiss NextGen API is based on the NextGenPSD2 Framework Version 1.3.4 of the Berlin Group which offers a modern, open, harmonised and interoperable set of
Application Programming Interfaces (APIs) as the safest and most efficient way to provide data securely.
The NextGen Framework reduces XS2A complexity and costs, addresses the problem of multiple competing standards
in Europe and, aligned with the goals of the Euro Retail Payments Board,
enables European banking customers to benefit from innovative products and services ('Banking as a Service')
by granting TPPs safe and secure (authenticated and authorised) access to their bank accounts and financial data.
The Swiss edtion refines the message formats specific to Switzerland and defines some matching examples.
The possible Approaches are:
Redirect SCA Approach
(Not recommended by obp.ch community) OAuth SCA Approach
(Not recommended by obp.ch community) Decoupled SCA Approach
(Not recommended by obp.ch community) Embedded SCA Approach without SCA method
(Not recommended by obp.ch community) Embedded SCA Approach with only one SCA method available
(Not recommended by obp.ch community) Embedded SCA Approach with Selection of a SCA method
Not every message defined in this API definition is necessary for all approaches.
Furthermore this API definition does not differ between methods which are mandatory, conditional, or optional
Therefore for a particular implementation of a compliant API it is only necessary to support
a certain subset of the methods defined in this API definition.
**Please have a look at the implementation guidelines if you are not sure
which message has to be used for the approach you are going to use.**
Some General Remarks Related to this version of the OpenAPI Specification:
This API definition is based on the Implementation Guidelines of the Berlin Group API.
It is not a replacement in any sense.
The main specification is (at the moment) always the Implementation Guidelines of the Berlin Group API.
This API definition contains the REST-API for requests from the PISP to the ASPSP.
This API definition contains the messages for all different approaches defined in the Implementation Guidelines.
According to the OpenAPI-Specification [https://github.com/OAI/OpenAPI-Specification/blob/master/versions/3.0.1.md]
"If in is "header" and the name field is "Accept", "Content-Type" or "Authorization", the parameter definition SHALL be ignored."
The element "Accept" will not be defined in this file at any place.
The elements "Content-Type" and "Authorization" are implicitly defined by the OpenApi tags "content" and "security".
There are several predefined types which might occur in payment initiation messages,
but are not used in the standard JSON messages in the Implementation Guidelines.
Therefore they are not used in the corresponding messages in this file either.
We added them for the convenience of the user.
If there is a payment product, which needs these fields, one can easily use the predefined types.
But the ASPSP need not to accept them in general.
**We omit the definition of all standard HTTP header elements (mandatory/optional/conditional)
except they are mentioned in the Implementation Guidelines.**
Therefore the implementer might add these in his own realisation of a comlient API in addition to the elements defined in this file.
General Remarks on Data Types
The Berlin Group definition of UTF-8 strings in context of the API have to support at least the following characters
a b c d e f g h i j k l m n o p q r s t u v w x y z
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
0 1 2 3 4 5 6 7 8 9
/ - ? : ( ) . , ' +
Space
The Swiss NextGen API is based on the NextGenPSD2 Framework Version 1.3.4 of the Berlin Group which offers a modern, open, harmonised and interoperable set of
Application Programming Interfaces (APIs) as the safest and most efficient way to provide data securely.
The NextGen Framework reduces XS2A complexity and costs, addresses the problem of multiple competing standards
in Europe and, aligned with the goals of the Euro Retail Payments Board,
enables European banking customers to benefit from innovative products and services ('Banking as a Service')
by granting TPPs safe and secure (authenticated and authorised) access to their bank accounts and financial data.
The Swiss edtion refines the message formats specific to Switzerland and defines some matching examples.
The possible Approaches are:
Redirect SCA Approach
(Not recommended by obp.ch community) OAuth SCA Approach
(Not recommended by obp.ch community) Decoupled SCA Approach
(Not recommended by obp.ch community) Embedded SCA Approach without SCA method
(Not recommended by obp.ch community) Embedded SCA Approach with only one SCA method available
(Not recommended by obp.ch community) Embedded SCA Approach with Selection of a SCA method
Not every message defined in this API definition is necessary for all approaches.
Furthermore this API definition does not differ between methods which are mandatory, conditional, or optional
Therefore for a particular implementation of a compliant API it is only necessary to support
a certain subset of the methods defined in this API definition.
**Please have a look at the implementation guidelines if you are not sure
which message has to be used for the approach you are going to use.**
Some General Remarks Related to this version of the OpenAPI Specification:
This API definition is based on the Implementation Guidelines of the Berlin Group API.
It is not a replacement in any sense.
The main specification is (at the moment) always the Implementation Guidelines of the Berlin Group API.
This API definition contains the REST-API for requests from the PISP to the ASPSP.
This API definition contains the messages for all different approaches defined in the Implementation Guidelines.
According to the OpenAPI-Specification [https://github.com/OAI/OpenAPI-Specification/blob/master/versions/3.0.1.md]
"If in is "header" and the name field is "Accept", "Content-Type" or "Authorization", the parameter definition SHALL be ignored."
The element "Accept" will not be defined in this file at any place.
The elements "Content-Type" and "Authorization" are implicitly defined by the OpenApi tags "content" and "security".
There are several predefined types which might occur in payment initiation messages,
but are not used in the standard JSON messages in the Implementation Guidelines.
Therefore they are not used in the corresponding messages in this file either.
We added them for the convenience of the user.
If there is a payment product, which needs these fields, one can easily use the predefined types.
But the ASPSP need not to accept them in general.
**We omit the definition of all standard HTTP header elements (mandatory/optional/conditional)
except they are mentioned in the Implementation Guidelines.**
Therefore the implementer might add these in his own realisation of a comlient API in addition to the elements defined in this file.
General Remarks on Data Types
The Berlin Group definition of UTF-8 strings in context of the API have to support at least the following characters
a b c d e f g h i j k l m n o p q r s t u v w x y z
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
0 1 2 3 4 5 6 7 8 9
/ - ? : ( ) . , ' +
Space
API v1.0.0
envoice.in
Run in Postman
or
View Postman docs
Quickstart
Visit github to view the quickstart tutorial.
Tutorial for running the API in postman
Click on ""Run in Postman"" button
postman - tutorial - 1
---
A new page will open.
Click the ""Postman for windows"" to run postman as a desktop app.
Make sure you have already installed Postman.
postman - tutorial - 2
---
In chrome an alert might show up to set a default app for opening postman links. Click on ""Open Postman"".
postman - tutorial - 3
---
The OpenAPI specification will be imported in Postman as a new collection named ""Envoice api""
postman - tutorial - 4
---
When testing be sure to check and modify the environment variables to suit your api key and secret. The domain is set to envoice's endpoint so you don't really need to change that.
\*Eye button in top right corner
postman - tutorial - 5
postman - tutorial - 6
---
You don't need to change the values of the header parameters, because they will be replaced automatically when you send a request with real values from the environment configured in the previous step.
postman - tutorial - 7
---
Modify the example data to suit your needs and send a request.
postman - tutorial - 8
Webhooks
Webhooks allow you to build or set up Envoice Apps which subscribe to invoice activities.
When one of those events is triggered, we'll send a HTTP POST payload to the webhook's configured URL.
Webhooks can be used to update an external invoice data storage.
In order to use webhooks visit this link and add upto 10 webhook urls that will return status 200 in order to signal that the webhook is working.
All nonworking webhooks will be ignored after a certain period of time and several retry attempts.
If after several attempts the webhook starts to work, we will send you all activities, both past and present, in chronological order.
The payload of the webhook is in format:
or
View Postman docs
Quickstart
Visit github to view the quickstart tutorial.
Tutorial for running the API in postman
Click on ""Run in Postman"" button
postman - tutorial - 1
---
A new page will open.
Click the ""Postman for windows"" to run postman as a desktop app.
Make sure you have already installed Postman.
postman - tutorial - 2
---
In chrome an alert might show up to set a default app for opening postman links. Click on ""Open Postman"".
postman - tutorial - 3
---
The OpenAPI specification will be imported in Postman as a new collection named ""Envoice api""
postman - tutorial - 4
---
When testing be sure to check and modify the environment variables to suit your api key and secret. The domain is set to envoice's endpoint so you don't really need to change that.
\*Eye button in top right corner
postman - tutorial - 5
postman - tutorial - 6
---
You don't need to change the values of the header parameters, because they will be replaced automatically when you send a request with real values from the environment configured in the previous step.
postman - tutorial - 7
---
Modify the example data to suit your needs and send a request.
postman - tutorial - 8
Webhooks
Webhooks allow you to build or set up Envoice Apps which subscribe to invoice activities.
When one of those events is triggered, we'll send a HTTP POST payload to the webhook's configured URL.
Webhooks can be used to update an external invoice data storage.
In order to use webhooks visit this link and add upto 10 webhook urls that will return status 200 in order to signal that the webhook is working.
All nonworking webhooks will be ignored after a certain period of time and several retry attempts.
If after several attempts the webhook starts to work, we will send you all activities, both past and present, in chronological order.
The payload of the webhook is in format:
Frankie Financial API
frankiefinancial.io
This API allows developers to integrate the Frankie Financial Compliance Utility into their applications. The API allows:
Checking name, address, date of birth against national databases
Validating Australian driver's licences, passports, medicare, visas and other Australian national ID documents
Validating Australian electricity bills
Validating NZ driver's licences
Validating Chinese bank cards and national ID card
Validating International passports and national ID documents
PEP, Sanctions, Watchlist and adverse media checking
Australian visa checks
Fraud list and fraud background checks
ID validation and selfie check comparisons.
Industry specific services
Comparing Australian electricity retailers for a better deal.
KYB specific services
Query organisation ownership
Perform KYC & AML checks on shareholders, beneficial owners and office bearers.
Query credit score and credit reports
International company searches
International company profiles
The full version of this documentation along with supplemental articles can be found here:
https://apidocs.frankiefinancial.com/
The traditional Swagger view of this documentation can be found here:
https://app.swaggerhub.com/apis-docs/FrankieFinancial/kycutility
Sandbox base URL is:
https://api.demo.frankiefinancial.io/compliance/v1.2
We do have an old sandbox at https://sandbox.frankiefinancial.com/compliance/v1.2 but this has been retired.
All calls are the same as production, only with canned data.
Full Swagger definition, along with test data for playing in the sandbox can be obtained once initial commercial discussions have commenced.
Production and optional UAT access will be opened up only to those with a signed commercial contract.
Contact us at [email protected] to speak with a sales rep about issuing a Customer ID and Sandbox api key.
Fire Financial Services Business API
The fire.com API allows you to deeply integrate Business Account features into your application or back-office systems.
The API provides read access to your profile, accounts and transactions, event-driven notifications of activity on the account and payment initiation via batches. Each feature has its own HTTP endpoint and every endpoint has its own permission.
The API exposes 3 main areas of functionality: financial functions, service information and service configuration.
Financial Functions
These functions provide access to your account details, transactions, payee accounts, payment initiation etc.
Service Functions
These provide information about the fees and limits applied to your account.
Service configuration
These provide information about your service configs - applications, webhooks, API tokens, etc.
The API provides read access to your profile, accounts and transactions, event-driven notifications of activity on the account and payment initiation via batches. Each feature has its own HTTP endpoint and every endpoint has its own permission.
The API exposes 3 main areas of functionality: financial functions, service information and service configuration.
Financial Functions
These functions provide access to your account details, transactions, payee accounts, payment initiation etc.
Service Functions
These provide information about the fees and limits applied to your account.
Service configuration
These provide information about your service configs - applications, webhooks, API tokens, etc.
SpectroCoin Merchant
spectrocoin.com
This is an API designed for merchants who are using SpectroCoin services and wishes to integrate them locally.
Big Red Cloud API
bigredcloud.com
Welcome to the Big Red Cloud API
This API enables programmatic access to Big Red Cloud data.
We have used Swagger to auto generate the API documentation on this page, and it also enables direct interaction with the API in this page.
To get started, you will require an API Key - check out our guide at https://www.bigredcloud.com/support/generating-api-key-guide/ for information on how to get one.
Use the 'Enter API Key' button below to enter your API key and start interacting with your Big Red Cloud data right on this page.
The API key will be stored in your browsers local storage for convenience, but you will be able to delete it at any time if you wish.
For additional information on the API, check out our support article at https://www.bigredcloud.com/support/api/
This API enables programmatic access to Big Red Cloud data.
We have used Swagger to auto generate the API documentation on this page, and it also enables direct interaction with the API in this page.
To get started, you will require an API Key - check out our guide at https://www.bigredcloud.com/support/generating-api-key-guide/ for information on how to get one.
Use the 'Enter API Key' button below to enter your API key and start interacting with your Big Red Cloud data right on this page.
The API key will be stored in your browsers local storage for convenience, but you will be able to delete it at any time if you wish.
For additional information on the API, check out our support article at https://www.bigredcloud.com/support/api/
BIN Lookup API
bintable.com
BIN lookup API, the free api service from bintable.com to lookup card information using it's BIN. the service maintains updated database based on the comunity and other third party services to make sure all BINs in the database are accurate and up to date.