Mock sample for your project: Motor Vehicle Department, Maharashtra API
Integrate with "Motor Vehicle Department, Maharashtra API" from apisetu.gov.in in no time with Mockoon's ready to use mock sample
Motor Vehicle Department, Maharashtra
apisetu.gov.in
Version: 3.0.0
Speed up your application development by using "Motor Vehicle Department, Maharashtra API" ready-to-use mock sample. Mocking this API will allow you to start working in no time. No more accounts to create, API keys to provision, accesses to configure, unplanned downtime, just work.
It also improves your integration tests' quality and reliability by accounting for random failures, slow response time, etc.
Description
Driving License (DL) and Vehicle Registration Certificate (RC) of the State, as available on Parivahan Sewa (http://parivahan.co.in/) of Ministry of Road Transport and Highways, are available on DigiLocker. Citizens can pull these documents into their DigiLocker accounts.
Other APIs by apisetu.gov.in
Mizoram State Board of School education
apisetu.gov.in
Mizoram Board of School Education, Mizoram (http://www.mbse.edu.in) has made available 2018 Class X and class XII marksheets and passing certificates in DigiLocker, which can be pulled by students into their accounts.
Transport Department, Meghalaya
apisetu.gov.in
Driving License (DL) and Vehicle Registration Certificate (RC) of the State, as available on Parivahan Sewa (http://parivahan.co.in/) of Ministry of Road Transport and Highways, are available on DigiLocker. Citizens can pull these documents into their DigiLocker accounts.
NIESBUD
apisetu.gov.in
Training certificates as issued by NIESBUD can be downloaded by Citizen in his/her DigiLocker account.
Tata AIA Life Insurance Co. Ltd.
apisetu.gov.in
Tata AIA Life Insurance Company Limited provides life insurance solutions to its consumers. Customers can access their policy details [Insurance Policy ďż˝ Life] and premium receipts [Premium Receipt] that are available to be pulled by the policy holders into their DigiLocker account (only documents issued on or after 28-June-2019 are currently available)
Maharashtra Council of Indian Medicine
apisetu.gov.in
APIs provided by Maharashtra Council of Indian Medicine.
Department of Food, Public Distribution & Consumer Affairs (PDS), Jharkhand
apisetu.gov.in
Public distribution system (PDS) is an Indian food security system. Established by the Government of India under Ministry of Consumer Affairs, Food, and Public Distribution and managed jointly with state governments in India. Jharkhand PDS Ration Card Certificates is available in Digilocker for Citizen.
Department of Empowerment of Persons with Disabilities
apisetu.gov.in
Department of Empowerment of Persons with Disabilities is issuing Unique Disability ID through DigiLocker. These can be pulled by beneficiaries into their DigiLocker accounts.
Transport Department, Punjab
apisetu.gov.in
Driving License (DL) and Vehicle Registration Certificate (RC) of the State, as available on Parivahan Sewa (http://parivahan.co.in/) of Ministry of Road Transport and Highways, are available on DigiLocker. Citizens can pull these documents into their DigiLocker accounts.
National Health Authority
apisetu.gov.in
More than 8 Crore PM-JAY e-cards are now available on DigiLocker.Beneficiaries can access PMJAY e-cards on their respective Digilocker account under issued document section.
Food and Supplies Department, Haryana
apisetu.gov.in
Ration Cards issued by Food & Supplies Department, Haryana (http://haryanafood.gov.in/) are available for download on DigiLocker.
Karnataka Department of Transport, Karnataka
apisetu.gov.in
Driving License (DL) & Vehicle Registration Certificate (RC) as issued by Transport Department, Government of Karnataka (http://transport.karnataka.gov.in) can be pulled by citizens into their DigiLocker accounts.
Other APIs in the same category
Transport Department, Haryana
apisetu.gov.in
Driving License (DL) and Vehicle Registration Certificate (RC) of the State, as available on Parivahan Sewa (http://parivahan.co.in/) of Ministry of Road Transport and Highways, are available on DigiLocker. Citizens can pull these documents into their DigiLocker accounts.
Veteran Confirmation
va.gov
The Veteran Confirmation API allows you to confirm Veteran status for a given person. This can be useful for offering Veterans discounts or other benefits.
The API will only return “Confirmed” or “Not Confirmed”.
Quickstart Guide
1. Get Access Credentials
Get started by filling out the form on the Apply for VA Lighthouse Developer Access page.
After submitting a request, you will receive your credentials for using the API in the Development environment, which allows you to try it out with mock data before moving to the Production environment.
2. Test the API
In the endpoint documentation below, we've provided a curl command builder for trying out the API before implementation with your app.
Use Test User attributes to populate the request body.
3. Build your app
The base URI for the Veteran Confirmation API in the Sandbox environment is:
https://sandbox-api.va.gov/services/veteran_confirmation/v0
In this environment, use attributes from the list of Test Users. Only Test Users can return a "confirmed" response.
Check out some of our sample apps. Please visit our VA Lighthouse Support portal should you need further assistance.
4. Show us a demo and get access to the Production environment
After building your app, we ask that you give us a demo before we set you up with production credentials. Please see the Path to Production page for more details.
Authorization
This API requires an API key in combination with identifiable information for the person being confirmed listed below. API requests are authorized through a symmetric API token provided in an HTTP header with name apikey. Including more information has a better chance of making a match and returning a Confirmed status.
Required information:
First Name
Last Name
Date of Birth
Social Security Number
Optional information:
Middle Name
Gender
Reference
Sandbox vs. Production Data
APIs accessed via the Sandbox environment are using the same underlying logic as VA’s production APIs; only the underlying data store is different.
Master Veteran Index (MVI)
The Master Veteran Index confirms a user's identity. In Production, several factors are considered to confirm identity. These include: a user’s first name, last name, date of birth and Social Security number. The MVI is mocked in the Sandbox environment. In this environment, the only factor used to confirm identity is the Social Security number.
Rate Limiting
We implemented basic rate limiting of 60 requests per minute. If you exceed this quota, your request will return a 429 status code. You may petition for increased rate limits by emailing and requests will be decided on a case by case basis.
Raw Open API Spec
https://api.va.gov/services/veteran_confirmation/docs/v0/api
The API will only return “Confirmed” or “Not Confirmed”.
Quickstart Guide
1. Get Access Credentials
Get started by filling out the form on the Apply for VA Lighthouse Developer Access page.
After submitting a request, you will receive your credentials for using the API in the Development environment, which allows you to try it out with mock data before moving to the Production environment.
2. Test the API
In the endpoint documentation below, we've provided a curl command builder for trying out the API before implementation with your app.
Use Test User attributes to populate the request body.
3. Build your app
The base URI for the Veteran Confirmation API in the Sandbox environment is:
https://sandbox-api.va.gov/services/veteran_confirmation/v0
In this environment, use attributes from the list of Test Users. Only Test Users can return a "confirmed" response.
Check out some of our sample apps. Please visit our VA Lighthouse Support portal should you need further assistance.
4. Show us a demo and get access to the Production environment
After building your app, we ask that you give us a demo before we set you up with production credentials. Please see the Path to Production page for more details.
Authorization
This API requires an API key in combination with identifiable information for the person being confirmed listed below. API requests are authorized through a symmetric API token provided in an HTTP header with name apikey. Including more information has a better chance of making a match and returning a Confirmed status.
Required information:
First Name
Last Name
Date of Birth
Social Security Number
Optional information:
Middle Name
Gender
Reference
Sandbox vs. Production Data
APIs accessed via the Sandbox environment are using the same underlying logic as VA’s production APIs; only the underlying data store is different.
Master Veteran Index (MVI)
The Master Veteran Index confirms a user's identity. In Production, several factors are considered to confirm identity. These include: a user’s first name, last name, date of birth and Social Security number. The MVI is mocked in the Sandbox environment. In this environment, the only factor used to confirm identity is the Social Security number.
Rate Limiting
We implemented basic rate limiting of 60 requests per minute. If you exceed this quota, your request will return a 429 status code. You may petition for increased rate limits by emailing and requests will be decided on a case by case basis.
Raw Open API Spec
https://api.va.gov/services/veteran_confirmation/docs/v0/api
Healthcare
Semantic API
The Semantic API complements the Articles API. With the Semantic API, you get access to the long list of people, places, organizations and other locations, entities and descriptors that make up the controlled vocabulary used as metadata by The New York Times (sometimes referred to as Times Tags and used for Times Topics pages).
The Semantic API uses concepts which are, by definition, terms in The New York Times controlled vocabulary. Like the way facets are used in the Articles API, concepts are a good way to uncover articles of interest in The New York Times archive, and at the same time, limit the scope and number of those articles. The Semantic API maps to external semantic data resources, in a fashion consistent with the idea of linked data. The Semantic API also provides combination and relationship information to other, similar concepts in The New York Times controlled vocabulary.
The Semantic API uses concepts which are, by definition, terms in The New York Times controlled vocabulary. Like the way facets are used in the Articles API, concepts are a good way to uncover articles of interest in The New York Times archive, and at the same time, limit the scope and number of those articles. The Semantic API maps to external semantic data resources, in a fashion consistent with the idea of linked data. The Semantic API also provides combination and relationship information to other, similar concepts in The New York Times controlled vocabulary.
Acko General Insurance Limited
apisetu.gov.in
Insurance policies issued by Acko General Insurance (https://www.acko.com) can be fetched by the citizens in their Digilocker accounts.
Lumminary API
lumminary.com
Introduction
The Lumminary API was built to allow third parties to interact with Lumminary customers and gain access to their genetic data. The Lumminary API is fast, scalable and highly secure. All requests to the Lumminary API take place over SSL, which means all communication of Customer data is encrypted.
Before we dive in, some definitions. This is what we mean by:
|Term|Definition|
|-----------|-----------|
|Third party|A third party (also referred to as "partner" or as "you") is a company which offers services and products using genetic data.|
|Lumminary clients|The Lumminary client (also referred to as "customer") is an individual who has created an account on the Lumminary platform.|
|Lumminary|This is us - our services including the Lumminary platform, the API, the DNA App Store, the DNA Vault, the "Connect with Lumminary" button, and the website in its totality. |
|CWL|This is the acronym for the "Connect with Lumminary" button.|
|dataset|This is the term we use when we refer to a customer's genetic data.|
|Lumminary API|This is a library/module that you can use to integrate your apps with the Lumminary platform.|
|Lumminary toolkit|This is a stand alone application which helps you integrate with Lumminary without writing any code or interacting with the Lumminary API.|
Let's dive in, now.
Overview
Install Lumminary API Client and Toolkit
Obtaining credentials
Query customers authorizations
Query customer genetic data
Submit reports
"Connect with Lumminary" button
API specs
Overview
In order to use Lumminary services, you'll need to install the Lumminary API Client or Toolkit. The Lumminary API Client and Toolkit are available in multiple programming languages, and we also provide a sandbox environment which you can use for integration and tests.
There are a couple of differences between the API Client and the Toolkit. Mainly, it's about the ease of use for integration. The Toolkit is basically a stand-alone application that facilitates the integration with the Lumminary API without the need to modify your already existing code.
You use the Lumminary API Client when you want to integrate it inside your own application. This means it gives you full flexibility regarding the integration into your own workflow.
You use the Lumminary Toolkit for an integration where the Toolkit is placed alongside your own application. You can use the Toolkit from the CLI - for example, to run a cronjob that processes incoming orders. The Toolkit uses the Lumminary API Client.
Install Lumminary API Client and/or Toolkit
We provide the Lumminary API Client and Toolkit in multiple programming languages - default are PHP (minimum version 7.0), Python2.7 and Python3. However, if you need them in another language (Java, Obj-C, JavaScript, C#, Perl, CURL), please contact us.
How to install the Lumminary API Client
PHP example:
The PHP Lumminary API Client is available at: https://github.com/Lumminary/lumminary-api-client-php
If you are already using Composer, you can import the project by adding the following to your composer.json
| Error Id | Error Message |
|:-----------------:|:---------------------------------------------------------------------------------------------|
| 1 | Invalid Security Token |
| 2 | Invalid Access Scopes |
| 3 | Customer refuses your request (this happens when the customer cancels instead of granting access) |
The Lumminary API was built to allow third parties to interact with Lumminary customers and gain access to their genetic data. The Lumminary API is fast, scalable and highly secure. All requests to the Lumminary API take place over SSL, which means all communication of Customer data is encrypted.
Before we dive in, some definitions. This is what we mean by:
|Term|Definition|
|-----------|-----------|
|Third party|A third party (also referred to as "partner" or as "you") is a company which offers services and products using genetic data.|
|Lumminary clients|The Lumminary client (also referred to as "customer") is an individual who has created an account on the Lumminary platform.|
|Lumminary|This is us - our services including the Lumminary platform, the API, the DNA App Store, the DNA Vault, the "Connect with Lumminary" button, and the website in its totality. |
|CWL|This is the acronym for the "Connect with Lumminary" button.|
|dataset|This is the term we use when we refer to a customer's genetic data.|
|Lumminary API|This is a library/module that you can use to integrate your apps with the Lumminary platform.|
|Lumminary toolkit|This is a stand alone application which helps you integrate with Lumminary without writing any code or interacting with the Lumminary API.|
Let's dive in, now.
Overview
Install Lumminary API Client and Toolkit
Obtaining credentials
Query customers authorizations
Query customer genetic data
Submit reports
"Connect with Lumminary" button
API specs
Overview
In order to use Lumminary services, you'll need to install the Lumminary API Client or Toolkit. The Lumminary API Client and Toolkit are available in multiple programming languages, and we also provide a sandbox environment which you can use for integration and tests.
There are a couple of differences between the API Client and the Toolkit. Mainly, it's about the ease of use for integration. The Toolkit is basically a stand-alone application that facilitates the integration with the Lumminary API without the need to modify your already existing code.
You use the Lumminary API Client when you want to integrate it inside your own application. This means it gives you full flexibility regarding the integration into your own workflow.
You use the Lumminary Toolkit for an integration where the Toolkit is placed alongside your own application. You can use the Toolkit from the CLI - for example, to run a cronjob that processes incoming orders. The Toolkit uses the Lumminary API Client.
Install Lumminary API Client and/or Toolkit
We provide the Lumminary API Client and Toolkit in multiple programming languages - default are PHP (minimum version 7.0), Python2.7 and Python3. However, if you need them in another language (Java, Obj-C, JavaScript, C#, Perl, CURL), please contact us.
How to install the Lumminary API Client
PHP example:
The PHP Lumminary API Client is available at: https://github.com/Lumminary/lumminary-api-client-php
If you are already using Composer, you can import the project by adding the following to your composer.json
| Error Id | Error Message |
|:-----------------:|:---------------------------------------------------------------------------------------------|
| 1 | Invalid Security Token |
| 2 | Invalid Access Scopes |
| 3 | Customer refuses your request (this happens when the customer cancels instead of granting access) |
OMDb
The Open Movie Database. The OMDb API is a free web service to obtain movie information, all content and images on the site are contributed and maintained by our users.
Numbers API
math.tools
All about Numbers. REST access with json/xml/jsonp result support. Below is the documentation for the Numbers API. You can try them out right here. Find more information and subscribe at math.tools
Department of Agricultural Marketing, Karnataka
apisetu.gov.in
APIs provided by Department of Agricultural Marketing, Karnataka.
Health Data Consent Manager
Entity which provides health information aggregation services to customers of health care services.
It enables customers to fetch their health information from one or more Health Information Providers
(e.g., Hospitals, Diagnostic Labs, Medical Device Companies), based on their explicit Consent and to share such
aggregated information with Health Information Users i.e. entities in need of such data (e.g., Insurers,
Doctors, Medical Researchers).
Specifications
This document maintains only the Health Information Gateway relevant APIs.
It enables customers to fetch their health information from one or more Health Information Providers
(e.g., Hospitals, Diagnostic Labs, Medical Device Companies), based on their explicit Consent and to share such
aggregated information with Health Information Users i.e. entities in need of such data (e.g., Insurers,
Doctors, Medical Researchers).
Specifications
This document maintains only the Health Information Gateway relevant APIs.
Department of Food, Public Distribution & Consumer Affairs (PDS), Jharkhand
apisetu.gov.in
Public distribution system (PDS) is an Indian food security system. Established by the Government of India under Ministry of Consumer Affairs, Food, and Public Distribution and managed jointly with state governments in India. Jharkhand PDS Ration Card Certificates is available in Digilocker for Citizen.
Haryana State Board of Technical Education, Haryana
apisetu.gov.in
HSBTE (http://hsbte.org.in/) is issuing marksheets (of Dec 2017 and June 2018 batches) through DigiLocker. These can be pulled by students into their DigiLocker accounts.