Mock sample for your project: National Institute of Electronics and Information Technology API

Integrate with "National Institute of Electronics and Information Technology API" from apisetu.gov.in in no time with Mockoon's ready to use mock sample

National Institute of Electronics and Information Technology

apisetu.gov.in

Version: 3.0.0


Use this API in your project

Speed up your application development by using "National Institute of Electronics and Information Technology API" ready-to-use mock sample. Mocking this API will help you accelerate your development lifecycles and allow you to stop relying on an external API to get the job done. No more API keys to provision, accesses to configure or unplanned downtime, just work.
Enhance your development infrastructure by mocking third party APIs during integrating testing.

Description

NIELIT, under Ministry of Electronics & IT (http://www.nielit.gov.in/) provides education and training in the area of Information, Electronics & Communication Technology. Certificates issued by NIELIT are made available in students' DigiLocker accounts.

Other APIs by apisetu.gov.in

Madhya Pradesh Medical Science University, Jabalpur M.P., Madhya Pradesh

apisetu.gov.in
Migration certificate issued from 2018 onward can now be fetched by Citizens in their DigiLocker account.

Meghalaya Board of School Education, Tura, Meghalaya

apisetu.gov.in
Meghalaya Board of School Education (MBOSE) with Marksheets of Class Xth and Class XIIth (Arts , Science, Commerce and Vocational), is availablke on DigiLocker for the students of 2015-2019.

Tata AIA Life Insurance Co. Ltd.

apisetu.gov.in
Tata AIA Life Insurance Company Limited provides life insurance solutions to its consumers. Customers can access their policy details [Insurance Policy � Life] and premium receipts [Premium Receipt] that are available to be pulled by the policy holders into their DigiLocker account (only documents issued on or after 28-June-2019 are currently available)

Motor Vehicle Department, Nagaland

apisetu.gov.in
Driving License (DL) and Vehicle Registration Certificate (RC) of the State, as available on Parivahan Sewa (http://parivahan.co.in/) of Ministry of Road Transport and Highways, are available on DigiLocker. Citizens can pull these documents into their DigiLocker accounts.

Manav Rachna International Institute of Research & Studies

apisetu.gov.in
Manav Rachna International Institute of Research & Studies, Faridabad (http://manavrachna.edu.in) is issuing Degree certificates through DigiLocker. These can be pulled by students into their DigiLocker accounts. Currently, data for the year 2019 is made available by Manav Rachna International Institute of Research & Studies.

Reliance General Insurance Company Ltd

apisetu.gov.in
Insurance policies issued by Reliance General Insurance Company Limited is available on DigiLocker at (https://www.reliancegeneral.co.in) can be fetched by Citizens into their DigiLocker accounts

National Health Authority

apisetu.gov.in
More than 8 Crore PM-JAY e-cards are now available on DigiLocker.Beneficiaries can access PMJAY e-cards on their respective Digilocker account under issued document section.

Haryana State Board of Technical Education, Haryana

apisetu.gov.in
HSBTE (http://hsbte.org.in/) is issuing marksheets (of Dec 2017 and June 2018 batches) through DigiLocker. These can be pulled by students into their DigiLocker accounts.

Kerala State Board of Public Examinations, Kerala

apisetu.gov.in
APIs provided by Kerala State Board of Public Examinations, Kerala.

UP State Council of Vocational Training, Uttar Pradesh, Uttar Pradesh

apisetu.gov.in
The State Council for Vocational Training (SCVT), Uttar Pradesh (http://www.vppup.in/) provides semester and consolidated mark sheets as well as vocational certificates for years 2013 to 2016.

Transport Department, Sikkim

apisetu.gov.in
Driving License (DL) and Vehicle Registration Certificate (RC) of the State, as available on Parivahan Sewa (http://parivahan.co.in/) of Ministry of Road Transport and Highways, are available on DigiLocker. Citizens can pull these documents into their DigiLocker accounts.

Transport Department, Gujarat

apisetu.gov.in
Driving License (DL) and Vehicle Registration Certificate (RC) of the State, as available on Parivahan Sewa (http://parivahan.co.in/) of Ministry of Road Transport and Highways, are available on DigiLocker. Citizens can pull these documents into their DigiLocker accounts.

Other APIs in the same category

University Of Delhi

apisetu.gov.in
University of Delhi (http://www.du.ac.in/) is issuing Degree certificates through DigiLocker. These can be pulled by students into their DigiLocker accounts. Currently data for 2017 is available.

Open Policy Agent (OPA) REST API

OPA provides policy-based control for cloud native environments. The following endpoints (such as PUT /v1/policies) provide reference documentation for the OPA REST API.
API specification viewing options
View the specification in Redoc (default)
View the specification in Swagger UI

High Performance Building Database

nrel.gov
The Buildings Database is a shared resource for the building industry. The Database, developed by the U.S. Department of Energy and the National Renewable Energy Laboratory (NREL), is a unique central repository of in-depth information and data on high-performance, green building projects across the United States and abroad.

Article Search API

With the Article Search API, you can search New York Times articles from Sept. 18, 1851 to today, retrieving headlines, abstracts, lead paragraphs, links to associated multimedia and other article metadata.
Note: In URI examples and field names, italics indicate placeholders for variables or values. Brackets [ ] indicate optional items. Parentheses ( ) are not a convention — when URIs include parentheses, interpret them literally.
Gateway is the hub that routes/orchestrates the interaction between consent managers and API bridges. There are 5 categories of APIs; discovery, link, consent flow, data flow and monitoring. To reflect the consumers of APIs, the above apis are also categorized under cm facing, hiu facing and hip facing

Climate FieldView Platform APIs

climate.com
Last Modified: Thu Oct 29 12:30:46 PDT 2020
All endpoints are only accessible via HTTPS.
All API endpoints are located at https://platform.climate.com (e.g.
https://platform.climate.com/v4/fields).
The authorization token endpoint is located at
https://api.climate.com/api/oauth/token.
Troubleshooting
X-Http-Request-Id response header will be returned on every call,
successful or not. If you experience an issue with our api and need
to contact technical support, please supply the value of the X-Http-Request-Id
header along with an approximate time of when the request was made.
Request Limits
When you’re onboarded to Climate’s API platform, your x-api-key is assigned a custom usage plan. Usage plans are unique to each partner and have the following key attributes:
Throttling information
burstLimit: Maximum rate limit over a period ranging from 1 second to a few seconds
rateLimit: A steady-state rate limit
Quota information
Limit: The maximum number of requests that can be made in a given month
When the request rate threshold is exceeded, a 429 response code is returned. Optionally, the Retry-After header may be returned:
Following are examples of rate limit errors:
Rate limit exceeded:
HTTP/1.1 429
Content-Type: application/json
Content-Length: 32
{"message":"Too Many Requests"}
Quota exhausted:
HTTP/1.1 429
Content-Type: application/json
Content-Length: 29
{"message":"Limit Exceeded"}
Pagination
Pagination is performed via headers. Any request which returns a "results"
array may be paginated. The following figure shows how query results are laid out with
X-Limit=4 and no filter applied.
If there are no results, a response code of 304 will be returned.
If the response is the last set of results, a response code of 200 or
206 will be returned.
If there are more results, a response code of 206 will be returned.
If X-Next-Token is provided in the request headers but the token has
expired, a response code of 409 will be returned. This is only applicable
for some endpoints; see specific endpoint documentation below.
X-Limit
The page size can be controlled with the X-Limit header. Valid values are
1-100 and defaults to 100.
X-Next-Token
If the results are paginated, a response header of X-Next-Token will be
returned. Use the associated value in the subsequent request (via the X-Next-Token
request header) to retrieve the next page. The following sequence diagram shows how to
use X-Next-Token to fetch all the records.
Chunked Uploads
Uploads larger than 5MiB (5242880 bytes) must be done in 5MiB chunks
(with the exception of the final chunk). Each chunk request MUST contain a
Content-Range header specifying the portion of the upload, and a Content-Type
header specifying binary content type (application/octet-stream). Range
uploads must be contiguous. The maximum upload size is capped at 500MiB (524288000 bytes).
Chunked Downloads
Downloads larger than 5MiB (5242880 bytes) must be done in 1-5MiB
chunks (with the exception of the final chunk, which may be less than 1MiB).
Each chunk request MUST contain a Range header specifying the requested portion of the download,
and an Accept header specifying binary and json content types (application/octet-stream,application/json)
or all content types (/).
Drivers
If you need drivers to process agronomic data, download the ADAPT plugin below. We only support the plugin in the Windows environment, minimum is Windows 7 SP1.
For asPlanted, asHarvested and asApplied data:
ADAPT Plugin
Release notes can be found here.
Download and use of the ADAPT plugin means that you agree to the EULA for use of the ADAPT plugin.
Please review the EULA (last updated on June 6th, 2019) before download and use of the ADAPT plugin.
For more information, please refer to:
ADAPT Resources
ADAPT Overview
ADAPT FAQ
ADAPT Videos
Sample Test Data
Sample agronomic data:
asPlanted and asHarvested data
asApplied data set 1
asApplied data set 2
To upload the sample data to your account, please follow the instructions in this link.
Sample soil data:
Sample soil data

ODN API

opendatanetwork.com
The Socrata OpenDataNetwork (ODN) REST API exposes public data, often continuosly updated and enhanced, from many thousands of public
government and non profit agencies.
Much of this data originating from independent sources is fused together to create new, and often
powerful, entity level data. The API, in addition to search and autosuggest capabilities for finding datasets,
enables data based comparisons across geographical regions such as states, counties, metropolitan areas,
cities and zip codes using highly vetted data providers such as US Census, BEA, HUD and others. Comparison data
is preformatted for easy and efficient display on a chart, graph or interactive map.
The API also exposes data organized by narrative style questions a human might ask. The questions can
be rapidly found using an autosuggest style index, and then used to directly access all data needed to
thoroughly and authoritatively answer the question. Retrieved data includes time series (temporally aligned),
tabular, map heavy (includes spatial boundaries), and auto generated unstructured descriptive text.
The ODN API does not duplicate API endpoints or services provided by public sector agencies, but rather,
returns context relevant pre-populated REST URLs, when appropriate, so the caller can access data
directly from the source.
The open source API powers OpenDataNetwork.com, an open source
site; the site highlights myriad uses and provides API badges with contextually relevant API example
REST endpoints and documentation pointers.
Finally, we continuously add new dat sources which appear automatically in the API, so if your favorite data
source is not available, check back soon. You can also join us HERE
and receive updates or let us know which data sources you are most interested in.
App Tokens
Registering for and including a Socrata application token
is required for the ODN API. They can be passed either using the app_token parameter
or the X-App-Token HTTP header.

Revenue, Registration & Land Reforms Department, Jharkhand

apisetu.gov.in
Department of Revenue, Registration & Land Reforms, Jharkhand (http://www.jharkhand.gov.in/revenue) is issuing Registration Certificate of Deeds into citizens' DigiLocker accounts from 5th May 2017 onwards.

Motor Vehicle Department, Kerala

apisetu.gov.in
Driving License (DL) and Vehicle Registration Certificate (RC) of the State, as available on Parivahan Sewa (http://parivahan.co.in/) of Ministry of Road Transport and Highways, are available on DigiLocker. Citizens can pull these documents into their DigiLocker accounts.

eNanoMapper database

AMBIT REST web services [eNanoMapper profile] with free text & faceted search

DriveBC's Open511 API

This API is DriveBC's implementation of the Open511 specification. It provides information about known road events (traffic accidents, construction, etc.) in British Columbia, Canada. Please note that you may experience issues when submitting requests to the delivery or test environment if using this OpenAPI specification in other API console viewers.

Lumminary API

lumminary.com
Introduction
The Lumminary API was built to allow third parties to interact with Lumminary customers and gain access to their genetic data. The Lumminary API is fast, scalable and highly secure. All requests to the Lumminary API take place over SSL, which means all communication of Customer data is encrypted.
Before we dive in, some definitions. This is what we mean by:
|Term|Definition|
|-----------|-----------|
|Third party|A third party (also referred to as "partner" or as "you") is a company which offers services and products using genetic data.|
|Lumminary clients|The Lumminary client (also referred to as "customer") is an individual who has created an account on the Lumminary platform.|
|Lumminary|This is us - our services including the Lumminary platform, the API, the DNA App Store, the DNA Vault, the "Connect with Lumminary" button, and the website in its totality. |
|CWL|This is the acronym for the "Connect with Lumminary" button.|
|dataset|This is the term we use when we refer to a customer's genetic data.|
|Lumminary API|This is a library/module that you can use to integrate your apps with the Lumminary platform.|
|Lumminary toolkit|This is a stand alone application which helps you integrate with Lumminary without writing any code or interacting with the Lumminary API.|
Let's dive in, now.
Overview
Install Lumminary API Client and Toolkit
Obtaining credentials
Query customers authorizations
Query customer genetic data
Submit reports
"Connect with Lumminary" button
API specs
Overview
In order to use Lumminary services, you'll need to install the Lumminary API Client or Toolkit. The Lumminary API Client and Toolkit are available in multiple programming languages, and we also provide a sandbox environment which you can use for integration and tests.
There are a couple of differences between the API Client and the Toolkit. Mainly, it's about the ease of use for integration. The Toolkit is basically a stand-alone application that facilitates the integration with the Lumminary API without the need to modify your already existing code.
You use the Lumminary API Client when you want to integrate it inside your own application. This means it gives you full flexibility regarding the integration into your own workflow.
You use the Lumminary Toolkit for an integration where the Toolkit is placed alongside your own application. You can use the Toolkit from the CLI - for example, to run a cronjob that processes incoming orders. The Toolkit uses the Lumminary API Client.
Install Lumminary API Client and/or Toolkit
We provide the Lumminary API Client and Toolkit in multiple programming languages - default are PHP (minimum version 7.0), Python2.7 and Python3. However, if you need them in another language (Java, Obj-C, JavaScript, C#, Perl, CURL), please contact us.
How to install the Lumminary API Client
PHP example:
The PHP Lumminary API Client is available at: https://github.com/Lumminary/lumminary-api-client-php
If you are already using Composer, you can import the project by adding the following to your composer.json
| Error Id | Error Message |
|:-----------------:|:---------------------------------------------------------------------------------------------|
| 1 | Invalid Security Token |
| 2 | Invalid Access Scopes |
| 3 | Customer refuses your request (this happens when the customer cancels instead of granting access) |