Mock sample for your project: IllumiDesk API
Integrate with "IllumiDesk API" from illumidesk.com in no time with Mockoon's ready to use mock sample
IllumiDesk
illumidesk.com
Version: 1.0
Integrate third-party APIs faster by using "IllumiDesk API" ready-to-use mock sample. Mocking this API will allow you to start working in no time. No more accounts to create, API keys to provision, accesses to configure, unplanned downtime, just work.
Improve your integration tests by mocking third-party APIs and cover more edge cases: slow response time, random failures, etc.
Description
Other APIs in the same category
Motor Vehicle Department, Nagaland
apisetu.gov.in
Driving License (DL) and Vehicle Registration Certificate (RC) of the State, as available on Parivahan Sewa (http://parivahan.co.in/) of Ministry of Road Transport and Highways, are available on DigiLocker. Citizens can pull these documents into their DigiLocker accounts.
Groundwater Wells, Aquifers and Registry API
gov.bc.ca
The groundwater wells, aquifers and registry API contains information related to groundwater wells and aquifers as well as a register of qualified well drillers and well pump installers registered to operate in B.C.
Karnataka State Board (Department of Pre University Education), Karnataka
apisetu.gov.in
Department of Pre University Education (http://pue.kar.nic.in) is providing certificates of II PUC (Class XII) March, July 2018 and March 2019 Examination marksheets.
U.S. EPA Enforcement and Compliance History Online (ECHO) - Detailed Facility Report (DFR)
epa.gov
Enforcement and Compliance History Online (ECHO) is a tool developed and maintained by EPA's Office of Enforcement and Compliance Assurance for public use. ECHO provides integrated compliance and enforcement information for over 1 million regulated facilities nationwide.
DFR Rest Services provide multiple service endpoints, to retrieve detailed facility location, enforcement, compliance monitoring, and pollutant information for any single facility. See the Detailed Facility Report (DFR) Help Page (https://echo.epa.gov/help/reports/detailed-facility-report-help) for additional information on the DFR. Additionally, a Data Dictionary (https://echo.epa.gov/help/reports/dfr-data-dictionary) is also available.
There is one primary service end point, get_dfr, that provides all available DFR data. All other service end points that are exposed, will return data on a single section of the DFR.
\
Additional ECHO Resources: Web Services, About ECHO's Data, Data Downloads
DFR Rest Services provide multiple service endpoints, to retrieve detailed facility location, enforcement, compliance monitoring, and pollutant information for any single facility. See the Detailed Facility Report (DFR) Help Page (https://echo.epa.gov/help/reports/detailed-facility-report-help) for additional information on the DFR. Additionally, a Data Dictionary (https://echo.epa.gov/help/reports/dfr-data-dictionary) is also available.
There is one primary service end point, get_dfr, that provides all available DFR data. All other service end points that are exposed, will return data on a single section of the DFR.
\
Additional ECHO Resources: Web Services, About ECHO's Data, Data Downloads
Highways England API
highwaysengland.co.uk
Revenue Department - Land Records, Karnataka
apisetu.gov.in
APIs provided by Revenue Department - Land Records, Karnataka.
Mtaa API Documentation
Mtaa A simple REST API to access Tanzania's location information,With mtaa API you can easily query and integrate all the location in tanzania from region level to streets from your programming language of your your choice
Books API
The Books API provides information about book reviews and The New York Times bestsellers lists.
TheTVDB API v3
thetvdb.com
API v3 targets v2 functionality with a few minor additions. The API is accessible via https://api.thetvdb.com and provides the following REST endpoints in JSON format.
How to use this API documentation
You may browse the API routes without authentication, but if you wish to send requests to the API and see response data, then you must authenticate.
Obtain a JWT token by POSTing to the /login route in the Authentication section with your API key and credentials.
Paste the JWT token from the response into the "JWT Token" field at the top of the page and click the 'Add Token' button.
You will now be able to use the remaining routes to send requests to the API and get a response.
Language Selection
Language selection is done via the Accept-Language header. At the moment, you may only pass one language abbreviation in the header at a time. Valid language abbreviations can be found at the /languages route..
Authentication
Authentication to use the API is similar to the How-to section above. Users must POST to the /login route with their API key and credentials in the following format in order to obtain a JWT token.
{"apikey":"APIKEY","username":"USERNAME","userkey":"USERKEY"}
Note that the username and key are ONLY required for the /user routes. The user's key is labled Account Identifier in the account section of the main site.
The token is then used in all subsequent requests by providing it in the Authorization header. The header will look like: Authorization: Bearer . Currently, the token expires after 24 hours. You can GET the /refresh_token route to extend that expiration date.
Versioning
You may request a different version of the API by including an Accept header in your request with the following format: Accept:application/vnd.thetvdb.v$VERSION. This documentation automatically uses the version seen at the top and bottom of the page.
How to use this API documentation
You may browse the API routes without authentication, but if you wish to send requests to the API and see response data, then you must authenticate.
Obtain a JWT token by POSTing to the /login route in the Authentication section with your API key and credentials.
Paste the JWT token from the response into the "JWT Token" field at the top of the page and click the 'Add Token' button.
You will now be able to use the remaining routes to send requests to the API and get a response.
Language Selection
Language selection is done via the Accept-Language header. At the moment, you may only pass one language abbreviation in the header at a time. Valid language abbreviations can be found at the /languages route..
Authentication
Authentication to use the API is similar to the How-to section above. Users must POST to the /login route with their API key and credentials in the following format in order to obtain a JWT token.
{"apikey":"APIKEY","username":"USERNAME","userkey":"USERKEY"}
Note that the username and key are ONLY required for the /user routes. The user's key is labled Account Identifier in the account section of the main site.
The token is then used in all subsequent requests by providing it in the Authorization header. The header will look like: Authorization: Bearer . Currently, the token expires after 24 hours. You can GET the /refresh_token route to extend that expiration date.
Versioning
You may request a different version of the API by including an Accept header in your request with the following format: Accept:application/vnd.thetvdb.v$VERSION. This documentation automatically uses the version seen at the top and bottom of the page.
Veteran Confirmation
va.gov
The Veteran Confirmation API allows you to confirm Veteran status for a given person. This can be useful for offering Veterans discounts or other benefits.
The API will only return “Confirmed” or “Not Confirmed”.
Quickstart Guide
1. Get Access Credentials
Get started by filling out the form on the Apply for VA Lighthouse Developer Access page.
After submitting a request, you will receive your credentials for using the API in the Development environment, which allows you to try it out with mock data before moving to the Production environment.
2. Test the API
In the endpoint documentation below, we've provided a curl command builder for trying out the API before implementation with your app.
Use Test User attributes to populate the request body.
3. Build your app
The base URI for the Veteran Confirmation API in the Sandbox environment is:
https://sandbox-api.va.gov/services/veteran_confirmation/v0
In this environment, use attributes from the list of Test Users. Only Test Users can return a "confirmed" response.
Check out some of our sample apps. Please visit our VA Lighthouse Support portal should you need further assistance.
4. Show us a demo and get access to the Production environment
After building your app, we ask that you give us a demo before we set you up with production credentials. Please see the Path to Production page for more details.
Authorization
This API requires an API key in combination with identifiable information for the person being confirmed listed below. API requests are authorized through a symmetric API token provided in an HTTP header with name apikey. Including more information has a better chance of making a match and returning a Confirmed status.
Required information:
First Name
Last Name
Date of Birth
Social Security Number
Optional information:
Middle Name
Gender
Reference
Sandbox vs. Production Data
APIs accessed via the Sandbox environment are using the same underlying logic as VA’s production APIs; only the underlying data store is different.
Master Veteran Index (MVI)
The Master Veteran Index confirms a user's identity. In Production, several factors are considered to confirm identity. These include: a user’s first name, last name, date of birth and Social Security number. The MVI is mocked in the Sandbox environment. In this environment, the only factor used to confirm identity is the Social Security number.
Rate Limiting
We implemented basic rate limiting of 60 requests per minute. If you exceed this quota, your request will return a 429 status code. You may petition for increased rate limits by emailing and requests will be decided on a case by case basis.
Raw Open API Spec
https://api.va.gov/services/veteran_confirmation/docs/v0/api
The API will only return “Confirmed” or “Not Confirmed”.
Quickstart Guide
1. Get Access Credentials
Get started by filling out the form on the Apply for VA Lighthouse Developer Access page.
After submitting a request, you will receive your credentials for using the API in the Development environment, which allows you to try it out with mock data before moving to the Production environment.
2. Test the API
In the endpoint documentation below, we've provided a curl command builder for trying out the API before implementation with your app.
Use Test User attributes to populate the request body.
3. Build your app
The base URI for the Veteran Confirmation API in the Sandbox environment is:
https://sandbox-api.va.gov/services/veteran_confirmation/v0
In this environment, use attributes from the list of Test Users. Only Test Users can return a "confirmed" response.
Check out some of our sample apps. Please visit our VA Lighthouse Support portal should you need further assistance.
4. Show us a demo and get access to the Production environment
After building your app, we ask that you give us a demo before we set you up with production credentials. Please see the Path to Production page for more details.
Authorization
This API requires an API key in combination with identifiable information for the person being confirmed listed below. API requests are authorized through a symmetric API token provided in an HTTP header with name apikey. Including more information has a better chance of making a match and returning a Confirmed status.
Required information:
First Name
Last Name
Date of Birth
Social Security Number
Optional information:
Middle Name
Gender
Reference
Sandbox vs. Production Data
APIs accessed via the Sandbox environment are using the same underlying logic as VA’s production APIs; only the underlying data store is different.
Master Veteran Index (MVI)
The Master Veteran Index confirms a user's identity. In Production, several factors are considered to confirm identity. These include: a user’s first name, last name, date of birth and Social Security number. The MVI is mocked in the Sandbox environment. In this environment, the only factor used to confirm identity is the Social Security number.
Rate Limiting
We implemented basic rate limiting of 60 requests per minute. If you exceed this quota, your request will return a 429 status code. You may petition for increased rate limits by emailing and requests will be decided on a case by case basis.
Raw Open API Spec
https://api.va.gov/services/veteran_confirmation/docs/v0/api